Scopus İndeksli Yayınlar Koleksiyonu
Permanent URI for this collectionhttps://hdl.handle.net/20.500.12573/395
Browse
165 results
Search Results
Article Non-Contact Acoustic Screening for Sleep Apnea: A Subject-Aware Deep Learning Approach(Springer Science and Business Media Deutschland GmbH, 2026-02-11) Aygün Çakıroğlu, M.; Kizilkaya Aydoǧan, E.; Bolatturk, Ö.F.; Aydoğan, S.; Ismailoǧullari, S.; Delice, Y.Purpose: To explore the feasibility of using camera-derived, non-contact audio synchronized with PSG for clinically relevant sleep-apnea classification, and to benchmark compact deep models under a subject-aware design using a previously unstudied, real-world dataset. Methods: Thirty-two adults underwent simultaneous polysomnography (PSG) and camera-based non-contact audio recording. The synchronized audio segments were used to train and compare three compact deep-learning architectures (convolutional, attention-augmented, and transformer-based) under a subject-aware evaluation design that prevented identity leakage. Model performance and calibration were assessed at both segment and subject levels using standard statistical tests. Results: Subject-level evaluation was based on a very small, imbalanced test set of six subjects (one positive). Within this limited yet previously unstudied local dataset, the CNN_trans model achieved an apparent perfect ranking performance (AUC = 1.00; 95% CI 0.00–1.00), though this likely reflects the small, imbalanced test cohort, with recall = 1.00 and precision = 0.55. The wide confidence interval reflects substantial statistical uncertainty, and DeLong comparisons showed no significant AUC difference between CNN_trans and CNN_att (ΔAUC = − 0.042; p = 0.43). Conclusion: PSG-synchronized, non-contact audio supports accurate and well-calibrated sleep-apnea classification with compact deep models. This subject-aware evaluation suggests that contactless acoustic monitoring may have potential clinical relevance, motivating larger, multi-site validation. © The Author(s), under exclusive licence to Springer Nature Switzerland AG 2026.Article Noninvasive Condition Monitoring for Eccentricity Fault Detection in Large Hydro Generators(TÜBİTAK Scientific & Technological Research Council Turkey, 2026-01-16) Lemeski, Atena Tazikeh; Tekgun, Didem; Keysan, Ozan; Leblebicioglu, Kemal; Gol, Murat; Leblebicioglu, Mehmet KemalEccentricity faults in electric machines remain a critical concern, as they generate uneven magnetic forces that increase vibration and noise, ultimately raising the risk of premature motor failure. This study proposes a method for the early detection of dynamic eccentricity (DE) faults in hydropower plants through an advanced optimization-based parameter identification technique integrated with finite element analysis (FEA). Finite element modeling (FEM) is first used to analyze an existing salient-pole synchronous generator (SPSG) from a hydroelectric power plant in T & uuml;rkiye. The effects of DE faults on the SPSG's magnetic equivalent circuit parameters are then examined under various fault severities. A comprehensive hydropower plant model-including the synchronous generator, governor, and excitation system-is developed in MATLAB/Simulink, with all input parameters obtained from real plant data and equivalent circuit variations extracted from FEA. After completing the modeling stage, including fault scenarios, MATLAB and Simulink are employed together to estimate key magnetic equivalent circuit parameters using a modified particle swarm optimization (MPSO) algorithm, achieving highly accurate parameter estimation. Since the hydropower system allows measurement of the three-phase output currents, parameter estimation is performed based on current variations under different fault conditions. The simulation results verify the method's ability to detect faults with high accuracy; thus, this integrated and noninvasive approach provides a robust framework for ensuring the operational reliability and longevity of large hydro generators.Article Deep-Learning Detection of Open-Apex Teeth on Panoramic Radiographs Using YOLO Models(Springer, 2025-12-23) Edik, Merve; Celebi, Fatma; Cukurluoglu, AykaganObjectivesThe use of deep learning in detecting teeth with open apices can prevent the need for additional radiographs for patients. The presented study aims to detect open-apex teeth using You Only Look Once (YOLO)-based deep learning models and compare these models.MethodsA total of 966 panoramic radiographs were included in the study. Open-apex teeth in panoramic radiographs were labeled. During the labeling process, they were divided into 6 classes in the maxilla and mandible, namely incisors, premolars, and molars. AI models YOLOv3, YOLOv4, and YOLOv5 were used. To evaluate the performance of the three detection models, both overall and separately for each class in the test dataset, precision, recall, average precision (mAP), and F1 score were calculated.ResultsYOLOv4 achieved the highest overall performance with a mean average precision (mAP) of 87.84% at IoU (Intersection over Union) 0.5 (mAP@0.5), followed by YOLOv5 with 85.6%, and YOLOv3 with 84.46%. Regarding recall, YOLOv4 also led with 90%, while both YOLOv3 and YOLOv5 reached 89%. Moreover, the F1 score was the highest for YOLOv4 (0.87), followed by YOLOv3 (0.86) and YOLOv5 (0.85).ConclusionsIn this study, YOLOv3, YOLOv4, and YOLOv5 were evaluated for the detection of open-apex teeth, and their mAP, recall, and F1 scores exceeded 84%. Deep learning-based systems can provide faster and more accurate results in the detection of open-apex teeth. This may help reduce the need for additional radiographs from patients and aid dentists by saving time.Article Modeling and Simulation of Dynamic Energy Management Systems for Smart Buildings(TÜBİTAK, 2025-11-25) Ozel, O.; Rıfat Boynueğrİ, A.; Yigit, H.; Tekgun, B.; Boynuegri, Ali RifatThis study presents a dynamic energy management system tailored for smart residential buildings, integrating thermal and electrical models to achieve both natural gas and electricity bill cost reduction. By harnessing wind and solar energy sources, the system aims to meet the diverse energy needs of modern homes. Through load shifting and thermal storage strategies, known as power-to-heat (P2H) approaches, the system ensures efficient renewable energy utilization while maintaining resident comfort. Validation of the proposed system was conducted using real-world data from the Yıldız Technical University Smart Home Laboratory, demonstrating its practical applicability and effectiveness. Results indicate significant reductions in both natural gas and electricity consumption, leading to substantial cost savings. Specifically, the proposed system reduced natural gas consumption by 3.79% and electricity consumption by 35.62%, highlighting its potential to enhance energy efficiency and sustainability in residential settings. © This work is licensed under a Creative Commons Attribution 4.0 International License.Article Citation - Scopus: 3Chaos in PID Controlled Nonlinear Systems(Korean Institute of Electrical Engineers, 2015) Ablay, G.Controlling nonlinear systems with linear feedback control methods can lead to chaotic behaviors. Order increase in system dynamics due to integral control and control parameter variations in PID controlled nonlinear systems are studied for possible chaos regions in the closed-loop system dynamics. The Lur’e form of the feedback systems are analyzed with Routh’s stability criterion and describing function analysis for chaos prediction. Several novel chaotic systems are generated from second-order nonlinear systems including the simplest continuous-time chaotic system. Analytical and numerical results are provided to verify the existence of the chaotic dynamics. © 2021 Elsevier B.V., All rights reserved.Article Sustainable Stabilization of Peat Soil with Hybrid Geopolymer Jet Grout Columns(Springer Int Publ A.G., 2025-10-15) Yalcin, Hakan; Erol, Aykut; Kaya, Zulkuf; Cadir, Cenk Cuma; Uncuoglu, Erdal; Akin, Muge K.Peat soils present severe challenges in geotechnical engineering due to their low shear strength, high water content, and aggressive chemical environments such as sulfate exposure. While cement-based jet grouting (JG) is widely used, it entails high carbon emissions and energy consumption. Hybrid geopolymer jet grout columns (HGJGCs) are presented in this work as a viable and sustainable alternative. Unlike conventional geopolymer studies that rely on pre-cured molds later exposed to aggressive environments, this research simulates realistic field conditions by injecting fresh geopolymer directly into sulfate-rich peat, where early-age durability and strength are critical. To address early strength limitations commonly seen in aggressive situations, a tiny amount of cement was added to the fly ash/GGBFS-based combination. Crucially, there is no need for high heat because the mechanism cures at room temperature. Physical model testing, laboratory-scale jet grouting, and performance comparisons with conventional JGCs were all carried out. Results show that HGJGCs increased the bearing capacity of peat by 5.5 times, improved compressive strength (5.3-5.7 MPa), and reduced settlement more effectively than JGCs. Additionally, CO2 emissions were reduced by 25.14% due to lower binder-related emissions and energy demand. This work shows that hybrid geopolymer systems are a viable, low-carbon substitute for peat stabilization because they can function well in real-world, chemically demanding situations.Article Citation - WoS: 1Citation - Scopus: 1A Comprehensive Review on the Extraction and Recovery of Lithium from Primary and Secondary Sources: Advances Toward Battery-Grade Materials(Wiley, 2025-10-20) Top, Soner; Kursunoglu, Sait; Altiner, MahmutLithium-ion battery (LIB) technologies have become indispensable to modern energy systems, driving global demand for high-purity lithium compounds. This review focuses on lithium recovery and purification strategies for battery-grade lithium carbonate (Li2CO3) and lithium hydroxide (LiOH), addressing both primary sources (brines and minerals) and secondary sources (waste materials). Industrially established processes, such as evaporation-based brine treatment and conventional metallurgical methods, are discussed alongside emerging techniques, including membrane separation, solvent extraction, and CO2-assisted precipitation. Particular attention is given to lithium precipitation mechanisms, the behaviour of co-existing ions during extraction, and the specific quality requirements for cathode material synthesis. By evaluating process scalability, environmental impact, and product purity, this review provides a comprehensive understanding of current practices and future directions. Additionally, it highlights the growing importance of lithium in the context of accelerating electric vehicle (EV) adoption, underscoring the bright and expanding future of the lithium industry.Article Failure Analysis of Fused Deposition Modeling 3D Printed Poly Lactic Acid Polymer(Sage Publications Ltd, 2025-10-04) Yilmaz, Cagatay; Eltahir, Sara Saeed AbdulrahmanAdditive manufacturing, commonly known as 3D printing (AM), has emerged as one of the most transformative technological advances in the last few decades in global manufacturing, as it allows for the production of intricate components without the use of costly molds. Fused Deposition Modeling (FDM) is widely adopted among various AM techniques due to its accessibility and effectiveness. FDM 3D-printed PLA (Poly Lactic Acid) shows a transversely isotopic symmetry similar to laminated composite structures. Therefore, classical lamination theory can be applied to FDM 3D-printed PLA. This study attempts to expand the knowledge by relying on classical lamination theory and several imposed failure theories like maximum stress, Tsai-Hill, Tsai-Wu, and Hashin to determine how FDM 3D printing of PLA fails. We investigate eight different raster orientations (0 degrees, 10 degrees, 15 degrees, 30 degrees, 45 degrees, 60 degrees, 75 degrees, and 90 degrees) and compare the theoretical prediction of strength with experimental findings. With this comprehensive analysis, we are seeking to better understand the failure analysis of FDM 3D printed PLA. The maximum stress, Tsai-Wu, Tsai-Hill, and Hashin failure theories show good agreement with experimental findings for 0 degrees and 90 degrees raster orientations. As the raster orientation shifts from 0 degrees, the discrepancy between experimental results and theoretical predictions increases, peaks at mid-angles, and then decreases, becoming negligible at 90 degrees.Article Citation - WoS: 5Citation - Scopus: 5Π-Conjugated Donor-Acceptor Small Molecule Thin-Films on Gold Electrodes for Reducing the Metal Work-Function(Elsevier Science SA, 2016-10) Azum, Naved; Taib, Layla Ahmad; Al Angari, Yasser Mohammed; Asiri, Abdullah M.; Denti, Mitchel; Zhao, Wei; Facchetti, AntonioThis paper reports the design, facile synthesis and purification of four pi-conjugated donor-acceptor small molecules comprising heteroaromatic units, DA-1-DA-4, for surface and electronic structure modification of gold thin film. These molecules were characterized by H-1/C-13 nuclear magnetic resonance spectroscopy, cyclic voltammetry, UV-Vis spectroscopy, and single-crystal X-ray diffraction. Morphologically smooth thin-films (similar to 5 nm) of DA-1-DA-4 were deposited onto Au thin films via thermal evaporation and characterized by atomic force microscopy, theta-2 theta X-ray diffraction and ultraviolet photoelectron spectroscopy. The work functions of the small molecule coated Au electrodes are shifted to lower energies by similar to 0.1-03 eV, compared to that of the bare Au film measured as a reference. The vapor-deposition of structurally,simple small molecules developed here shows great promise as a facile approach to reduce gold work function for electron injection/extraction between organic semiconductors and Au contacts in various opto-electronic devices. (C) 2016 Elsevier B.V. All tights reserved.Article Use of Laser-Induced Bubbles in Intraocular Pressure Measurement: A Preliminary Study(IOP Publishing Ltd, 2018-11-23) Altindis, Fatih; Ozdur, Ibrahim T.; Mutlu, Sait N.; Yilmaz, BulentThis work investigates the feasibility of a novel approach for measuring intraocular pressure (IOP) by analyzing micron-level laser-induced bubble characteristics in the intraocular fluid. We believe that this concept may be used as a non-invasive alternative for measuring a patient's IOP by analyzing the laser-induced bubble volume in the intraocular fluid in the anterior chamber of the eye. The behavior of laser-induced bubbles was examined under differing fluid pressure levels and at differing laser pulse energy levels. An intraocular medium-like environment was imitated and an imaging system was designed in order to capture laser-induced bubbles with their movements. The video recordings of the bubbles were processed using custom software, and the volume of the bubbles was estimated using three different approaches. The bubble volumes were estimated more accurately by using the rising velocity of the bubble rather than its direct radii appearances on the images. An inversely proportional relationship was observed between the laser-induced bubble volume and the fluid pressure. IOP can be measured with a non-invasive technique using laser-induced bubble volume. Deeper and detailed studies, including clinical studies, may lead to the use of lasers for measuring IOP.