Scopus İndeksli Yayınlar Koleksiyonu
Permanent URI for this collectionhttps://hdl.handle.net/20.500.12573/395
Browse
101 results
Search Results
Article Process Optimization of Buckwheat Starch Myristic Acid Complex Film(John Wiley and Sons Inc, 2026-02) Koca, E.; Oskaybaş-Emlek, B.; Kahraman, K.; Özbey, A.; Aydemir, L.Y.; Oskaybas Emlek, BetulIn this study, it was aimed to develop an edible film from an amylose-lipid complex with better mechanical properties and water vapor barrier. For this purpose, the buckwheat starch (BS) is modified with myristic acid (MA) and the edible film production process was optimized by using central composite design with 4 center points where film forming solution's glycerol concentration, pH, and the temperature of as dependent variable and tensile strength (TS), elongation at break (EAB) value and Young's modulus (YM) as response. The models were significant for TS and YM, and the glycerol concentration and temperature had a significant effect on the TS of the films. The edible film produced in validated optimized conditions had better EAB (149%) and TS (1.064 MPa), and lower water solubility (44.7%) and water vapor permeability (0.39 g × mm/m2 × h × kPa) than control film (p < 0.05). There was no significant change in color values, but an increase in opacity (2.14). With the formation of the BS-MA complex, increased surface roughness and more hydrophilic (contact angle = 92.4°) films were obtained. These findings demonstrate that the BS-MA complex film has significant potential for practical applications as an edible film. © 2026 Wiley-VCH GmbH.Article Noninvasive Condition Monitoring for Eccentricity Fault Detection in Large Hydro Generators(TÜBİTAK Scientific & Technological Research Council Turkey, 2026-01-16) Lemeski, Atena Tazikeh; Tekgun, Didem; Keysan, Ozan; Leblebicioglu, Kemal; Gol, Murat; Leblebicioglu, Mehmet KemalEccentricity faults in electric machines remain a critical concern, as they generate uneven magnetic forces that increase vibration and noise, ultimately raising the risk of premature motor failure. This study proposes a method for the early detection of dynamic eccentricity (DE) faults in hydropower plants through an advanced optimization-based parameter identification technique integrated with finite element analysis (FEA). Finite element modeling (FEM) is first used to analyze an existing salient-pole synchronous generator (SPSG) from a hydroelectric power plant in T & uuml;rkiye. The effects of DE faults on the SPSG's magnetic equivalent circuit parameters are then examined under various fault severities. A comprehensive hydropower plant model-including the synchronous generator, governor, and excitation system-is developed in MATLAB/Simulink, with all input parameters obtained from real plant data and equivalent circuit variations extracted from FEA. After completing the modeling stage, including fault scenarios, MATLAB and Simulink are employed together to estimate key magnetic equivalent circuit parameters using a modified particle swarm optimization (MPSO) algorithm, achieving highly accurate parameter estimation. Since the hydropower system allows measurement of the three-phase output currents, parameter estimation is performed based on current variations under different fault conditions. The simulation results verify the method's ability to detect faults with high accuracy; thus, this integrated and noninvasive approach provides a robust framework for ensuring the operational reliability and longevity of large hydro generators.Article Spatial Dimension of the Local Phenomenon in Kayseri(Gazi University, Faculty of Engineering Architecture, 2025-12-31) Ozmen, Nihan Mus; Asiliskender, BurakKayseri is in the centre of Anatolia, at the intersection of trade and military routes, and possesses a rich cultural heritage. Throughout its history, the city has hosted various civilizations, developing around a central castle and continuing to expand, particularly after the 19th century. Kayseri has long served as a meeting point for diverse cultures. Within this diversity, families known as locals, whose origins date back to the oldest neighbourhoods within the city walls, have held significant mercantile power. These local families regard themselves as the actual owners of Kayseri and have influenced the city's developmental trajectory. Over time, they have moved outward from the centre to newly developed neighbourhoods, first to the north and then to the east. This study examines the urban development of Kayseri in the 20th century and the spatial mobility of these local families. It employs qualitative methods such as ethnographic observation, oral history interviews, and GIS-based thematic mapping to analyse these movements in a multi-layered way. The study also aims to understand Kayseri's socio-cultural dynamics and historical texture by investigating the role of local families in the city's physical and functional transformations. In this context, it addresses the physical and functional changes in neighbourhoods vacated by these relocations.Article Modeling and Simulation of Dynamic Energy Management Systems for Smart Buildings(TÜBİTAK, 2025-11-25) Ozel, O.; Rıfat Boynueğrİ, A.; Yigit, H.; Tekgun, B.; Boynuegri, Ali RifatThis study presents a dynamic energy management system tailored for smart residential buildings, integrating thermal and electrical models to achieve both natural gas and electricity bill cost reduction. By harnessing wind and solar energy sources, the system aims to meet the diverse energy needs of modern homes. Through load shifting and thermal storage strategies, known as power-to-heat (P2H) approaches, the system ensures efficient renewable energy utilization while maintaining resident comfort. Validation of the proposed system was conducted using real-world data from the Yıldız Technical University Smart Home Laboratory, demonstrating its practical applicability and effectiveness. Results indicate significant reductions in both natural gas and electricity consumption, leading to substantial cost savings. Specifically, the proposed system reduced natural gas consumption by 3.79% and electricity consumption by 35.62%, highlighting its potential to enhance energy efficiency and sustainability in residential settings. © This work is licensed under a Creative Commons Attribution 4.0 International License.Article Developing a Label Propagation Approach for Cancer Subtype Classification Problem(TUBITAK, 2021) Güner, P.; Bakir-Güngör, B.; Coşkun, M.; Şahan, Pınar GünerCancer is a disease in which abnormal cells grow uncontrollably and invade other tissues. Several types of cancer have various subtypes with different clinical and biological implications. Based on these differences, treatment methods need to be customized. The identification of distinct cancer subtypes is an important problem in bioinformatics, since it can guide future precision medicine applications. In order to design targeted treatments, bioinformatics methods attempt to discover common molecular pathology of different cancer subtypes. Along this line, several computational methods have been proposed to discover cancer subtypes or to stratify cancer into informative subtypes. However, existing works do not consider the sparseness of data (genes having low degrees) and result in an ill-conditioned solution. To address this shortcoming, in this paper, we propose an alternative unsupervised method to stratify cancer patients into subtypes using applied numerical algebra techniques. More specifically, we applied a label propagation-based approach to stratify somatic mutation profiles of colon, head and neck, uterine, bladder, and breast tumors. We evaluated the performance of our method by comparing it to the baseline methods. Extensive experiments demonstrate that our approach highly renders tumor classification tasks by largely outperforming the state-of-the-art unsupervised and supervised approaches. © 2022 Elsevier B.V., All rights reserved.Article Forecasting the Consumer Price Index in Türkiye Using Machine Learning Models: A Comparative Analysis(Gazi Univ, 2025-09-01) Söylemez, İsmet; Ünlü, Ramazan; Nalici, Mehmet ErenThis study utilizes machine learning models to forecast Türkiye's Consumer Price Index (CPI), thereby addressing a critical gap in inflation prediction methodologies. The central research problem involves the forecasting of CPI in a volatile economic environment, which is essential for informed policymaking. The primary objective of this study is to evaluate the performance of three machine learning models, such as Decision Tree (DT), Random Forest (RF), and Support Vector Machine (SVM), in forecasting CPI over periods ranging from one to six months, utilizing data from 2012 to 2024. The study's unique contribution lies in the application of the \"SelectKBest\" method, which identifies the most relevant indices, thereby enhancing the efficiency of the models. An ensemble method, Averaging Voting, is also employed to combine the strengths of these models, producing more accurate and robust predictions. The findings indicate that while the RF model consistently generates the most accurate forecasts across all shifts, the SVM model demonstrates a particular strength in the domain of short-term predictions. The ensemble model demonstrates a substantial performance improvement, with a R2 value of 0.962 for one-month ahead of estimates and 0.956 for five-month forecasts. This combined approach has been shown to outperform individual models, offering a more reliable framework for CPI forecasting. The findings offer valuable insights for economic policymakers, enabling more precise and stable inflation predictions in Türkiye.Article Tuning Mechanical Performance of PCL Scaffolds: Influence of 3D Bioprinting Parameters, Polymer Concentration, and Solvent Selection(IOP Publishing Ltd, 2025-09-01) Ceylan, Saniye Aylin; Baltacioglu, Mehmet Furkan; Bal, Burak; Bayram, Ferdi Caner; Isoglu, Ismail AlperThe mechanical performance of three-dimensional (3D) bioprinted scaffolds is susceptible to printing parameters and material formulation. In this study, poly (epsilon-caprolactone) (PCL) scaffolds were fabricated using four different polymer concentrations (10%, 25%, 50%, and 75% w/v) to investigate how these variations, along with process parameters, influence mechanical behavior. Maintaining the structural integrity of bioprinted constructs requires careful optimization of polymer concentration and precise control over parameters such as printing speed, pressure, and infill density. Tensile tests were conducted to evaluate the effects of these variables. Among the tested conditions, a 50% (w/v) concentration allowed for a broader operational window, enabling fabrication across a range of printing speeds and pressures. At a printing speed of 5 mm s-1, PCL-DCM exhibited a Young's modulus of 39.0 MPa, while PCL-CF samples printed at 10 mm s-1 achieved the highest modulus of 32.0 MPa. Notably, when the printing speed was kept constant, applying higher pressures led to an increase in Young's modulus, suggesting that pressure plays a key role in enhancing scaffold stiffness. When comparing the 50% and 75% (w/v) polymer concentrations, the 50% (w/v) formulation stood out by offering both higher elongation and greater stiffness, which makes it particularly suitable for load-bearing applications. These findings provide a quantitative framework for optimizing extrusion-based bioprinting of PCL scaffolds, with implications for customized biomedical implants and regenerative medicine.Article Citation - WoS: 1Citation - Scopus: 1Prediction of the Diffusible Hydrogen Concentration After Electrochemical Charging Utilizing Artificial Intelligence(IOP Publishing Ltd, 2025-09-01) Sivesoglu, Abdurrahman; Li, Yang; Bal, BurakThe concentration of diffusible hydrogen in a material is of high importance as it helps to predict the hydrogen embrittlement effect in the material, and the amount of mechanical properties' degradation after reaching a critical concentration. Despite that, a simple experimental setup is not available to measure hydrogen concentration at service. In this paper, a multi-layer perceptron (MLP) model is developed using weight initialization, which can estimate the diffusible hydrogen concentration of Face-Centred-Cubic (FCC) metals after electrochemical charging. The input properties of the model include the electrochemical charging parameters of current density, temperature, and charging time as well as the grain size of the specimen. The MLP model with and without the weight initialization was validated and tested with unseen test dataset. The model in both cases showed an excellent predictive performance with a higher accuracy and faster convergence when using weight initialization. A linear correlation of 89% between the experimental and predicted hydrogen concentration was observed. This demonstrates that for the family of FCC metals under electrochemical charging, the estimation of diffusible hydrogen concentration is a feasible path for material safety design analysis.Article Citation - Scopus: 1eTNT: Enhanced Textnettopics With Filtered LDA Topics and Sequential Forward / Backward Topic Scoring Approaches(Science and Information Organization, 2024) Voskergian, Daniel; Jayousi, Rashid; Bakir-Güngör, BurcuTextNetTopics is a novel text classification-based topic modelling approach that focuses on topic selection rather than individual word selection to train a machine learning algorithm. However, one key limitation of TextNetTopics is its scoring component, which evaluates each topic in isolation and ranks them accordingly, ignoring the potential relationships between topics. In addition, the chosen topics may contain redundant or irrelevant features, potentially increasing the feature set size and introducing noise that can degrade the overall model performance. To address these limitations and improve the classification performance, this study introduces an enhancement to TextNetTopics. eTNT integrates two novel scoring approaches: Sequential Forward Topic Scoring (SFTS) and Sequential Backward Topic Scoring (SBTS), which consider topic interactions by assessing sets of topics simultaneously. Moreover, it incorporates a filtering component that aims to enhance topics' quality and discriminative power by removing non-informative features from each topic using Random Forest feature importance values. These integrations aim to streamline the topic selection process and enhance classifier efficiency for text classification. The results obtained from the WOS-5736, LitCovid, and MultiLabel datasets provide valuable insights into the superior effectiveness of eTNT compared to its counterpart, TextNetTopics. © 2024 Elsevier B.V., All rights reserved.Article Citation - WoS: 3Citation - Scopus: 4Tuning Optical Properties of Self-Assembled Nanoparticle Network with External Optical Excitation(American Institute of Physics Inc., 2021-04-20) Şenel, Z.; İçöz, K.; Erdem, T.; Icoez, KutayDNA-driven self-assembly enables precise positioning of the colloidal nanoparticles owing to specific Watson-Crick interactions. Another important feature of this self-assembly method is its reversibility by controlling the temperature of the medium. In this work, we study the potential of another mechanism to control the binding/unbinding process of DNA-functionalized gold nanoparticles. We employ laser radiation that can be absorbed by the gold nanoparticles to heat their network and disassociate it. Here, we show that we can actively control the optical properties of the nanoparticle network by external optical excitation. We find out that by irradiating the structure with a green hand-held laser, the total transmittance can increase by ∼30% compared to the transmittance of the sample not irradiated by the laser. Similarly, the optical microscopy images indicate the transformation of the nanoparticle network from opaque to transparent, while the nanoparticles formed a network again after the laser irradiation stopped. Our results prove that the optical excitation can be used to tailor the structure and thus the optical properties of the DNA-self-assembled nanoparticle networks. © 2021 Elsevier B.V., All rights reserved.