Scopus İndeksli Yayınlar Koleksiyonu
Permanent URI for this collectionhttps://hdl.handle.net/20.500.12573/395
Browse
36 results
Search Results
Article Enhanced Photoluminescence and Stability of CsPbBr3 Perovskite Nanocrystals Through AuCl Doping(Springer, 2026-02) Khorasani, Azam; Mutlugun, EvrenThis study delves into the transformative effects of inorganic gold chloride (AuCl) doping on all-inorganic cesium lead bromide (CsPbBr3) colloidal perovskite quantum dots (PeQDs). Using a precise hot injection synthesis method, AuCl was introduced at concentrations ranging from 0 to 10%, enabling a comprehensive analysis of its impact on the structural, morphological, and optical characteristics of CsPbBr3 PeQDs. We systematically investigated how varying AuCl levels influence photoluminescence (PL), PL quantum yield (PLQY), and the stability of these quantum dots. Advanced characterization techniques, including X-ray diffraction (XRD), scanning transmission electron microscopy (STEM), energy dispersive X-ray analysis (EDX), Fourier-transform infrared spectroscopy (FTIR), UV-Vis absorption, steady-state PL, absolute PL measurement, and time-resolved PL (TRPL), provided a detailed insight into these changes. Our findings indicate that AuCl doping is successfully integrated into CsPbBr3 PeQDs, with 5% identified as the optimal concentration. At this level, the quantum dots show enhanced PLQY, superior crystallinity, and increased stability at 50 degrees C and in ethanol solvent compared to undoped samples. While higher doping levels reduce QY and PL slightly, they still outperform the undoped CsPbBr3 PeQDs. These results demonstrate that AuCl doping can fine-tune the structural and optical properties of CsPbBr3 PeQDs, marking a significant step forward in developing tailored materials for advanced optoelectronic applications.Article Zinc Chalcogenide Based Shell Layers for Colloidal Quantum Wells(Wiley, 2025-04-27) Aldemir, Cagatay Han; Yazici, Ahmet Faruk; Ergezer, Nehir; Korkmaz, Taha Can; Mutlugun, Evren; Kelestemur, YusufColloidal quantum wells, also known as colloidal nanoplatelets (NPLs), have emerged as a promising class of materials for light-emitting devices (LEDs). However, the most widely studied core/shell NPLs, which rely on cadmium-based shell layers, face challenges due to toxicity concerns and improper charge confinement. To address these limitations, a new synthetic approach is presented that enables the controlled growth of zinc chalcogenide-based shell layers on NPLs. The synthesized CdSe/ZnSe core/shell NPLs exhibit emission between 615 and 630 nm, with a moderate photoluminescence quantum yield (PL-QY) of 40-50%. It is also demonstrated that the lateral dimensions of the CdSe core NPLs significantly affect the optical properties of the core/shell heterostructures, with smaller lateral dimensions resulting in narrower emission linewidths as low as 20 nm. Further passivation of these core/shell NPLs with an additional ZnS shell layer significantly increases the PL-QY up to 80-90%. Finally, the device performance of these two core/shell NPLs is investigated by fabricating solution-processed LEDs. With LEDs incorporating CdSe/ZnSe/ZnS core/multi-shell NPLs as the active light-emitting layer, an external quantum efficiency (EQE) of 3.82% and a maximum brightness of 6477 cd m-2 is obtained. These findings underscore the significant potential of zinc chalcogenide-based shell layers in advancing colloidal NPLs toward high-performance light-emitting devices.Article Citation - WoS: 13Citation - Scopus: 13Tuning the Shades of Red Emission in InP/ZnSe Nanocrystals With Narrow Full Width for Fabrication of Light-Emitting Diodes(Amer Chemical Soc, 2023-10-13) Soheyli, Ehsan; Bicer, Aysenur; Ozel, Sultan Suleyman; Tiras, Kevser Sahin; Mutlugun, Evren; Sahin Tiras, KevserWhile Cd-based luminescent nanocrystals (NCs) are the most mature NCs for fabricating efficient red light-emitting diodes (LEDs), their toxicity related limitation is inevitable, making it necessary to find a promising alternative. From this point of view, multishell-coated, red-emissive InP-based NCs are excellent luminescent nanomaterials for use as an emissive layer in electroluminescent (EL) devices. However, due to the presence of oxidation states, they suffer from a wide emission spectrum, which limits their performance. This study uses tris-(dimethyl-amino)-phosphine (3DMA-P) as a low-cost aminophosphine precursor and a double HF treatment to suggest an upscaled, cost-effective, and one-pot hot-injection synthesis of purely red-emissive InP-based NCs. The InP core structures were coated with thick layers of ZnSe and ZnS shells to prevent charge delocalization and to create a narrow size distribution. The purified NCs showed an intense emission signal as narrow as 43 nm across the entire red wavelength range (626-670 nm) with an emission quantum efficiency of 74% at 632 nm. The purified samples also showed an emission quantum efficiency of 60% for far-red wavelengths of 670 nm with a narrow full width of 50 nm. The samples showed a relatively long average emission lifetime of 50-70 ns with a biexponential decay profile. To demonstrate the practical ability of the prepared NCs in optoelectronics, we fabricated a red-emissive InP-based LEDs. The best-performing device showed an external quantum efficiency (EQE) of 1.16%, a luminance of 1039 cd m(-2), and a current efficiency of 0.88 cd A(-1).Article Citation - WoS: 15Citation - Scopus: 14The Effect of Ligand Chain Length on the Optical Properties of Alloyed Core-Shell InPZnS/ZnS Quantum Dots(Elsevier Science SA, 2017-07) Altintas, Yemliha; Talpur, Mohammad Younis; Mutlugun, EvrenIn this work, we demonstrate the effect of organic ligands on the optical properties of alloyed core-shell InPZnS/ZnS quantum dots (QDs). We have systematically studied the synthesis and characterization of InPZnS/ZnS QDs using short and long chain length ligands i.e., butyric (C4), hexanoic (C6), octanoic (C8), dodecanoic (C12), myristic (C14), palmitic (C16) and stearic acids (C18), respectively. This study achieved more than 85% quantum yield with 43 nm full-width-half maximum value, using dodecanoic acid as the capping ligand. The properties of the QDs with short and long chain length ligands have been analyzed using UV Vis absorption spectrophotometer, steady state and time resolved photoluminescence spectrometer, X-ray diffraction, Zeta sizer, transmission electron microscopy and energy dispersive X-ray spectroscopy. (C) 2017 Published by Elsevier B.V.Article Citation - WoS: 1Citation - Scopus: 1Tailoring Quantum Dot Shell Thickness and Polyethylenimine Interlayers for Optimization of Inverted Quantum Dot Light-Emitting Diodes(MDPI, 2024-07-11) Yazici, Ahmet F.; Ocal, Sema Karabel; Bicer, Aysenur; Serin, Ramis B.; Kacar, Rifat; Ucar, Esin; Mutlugun, EvrenQuantum dot light-emitting diodes (QLEDs) hold great promise for next-generation display applications owing to their exceptional optical properties and versatile tunability. In this study, we investigate the effects of quantum dot (QD) shell thickness, polyethylenimine (PEI) concentration, and PEI layer position on the performance of inverted QLED devices. Two types of alloyed-core/shell QDs with varying shell thicknesses were synthesized using a one-pot method with mean particle sizes of 8.0 +/- 0.9 nm and 10.3 +/- 1.3 nm for thin- and thick-shelled QDs, respectively. Thick-shelled QDs exhibited a higher photoluminescence quantum yield (PLQY) and a narrower emission linewidth compared to their thin-shelled counterparts. Next, QLEDs employing these QDs were fabricated. The incorporation of PEI layers on either side of the QD emissive layer significantly enhanced device performance. Using PEI on the hole transport side resulted in greater improvement than on the electron injection side. Sandwiching the QD layer between two PEI layers led to the best performance, with a maximum external quantum efficiency (EQE) of 17% and a peak luminance of 91,174 cd/m2 achieved using an optimized PEI concentration of 0.025 wt% on both electron injection and hole injection sides. This study highlights the critical role of QD shell engineering and interfacial modification in achieving high-performance QLEDs for display applications.Article Citation - WoS: 3Citation - Scopus: 3Superior CdSe/ZnS@Fe2O3 Yolk-Shell Nanoparticles as Optically Active MRI Contrast Agents(Wiley-VCH Verlag GmbH, 2022-07) Ekici, Derya D.; Mutlugun, EvrenWe have developed a robust synthesis methodology for quantum dots (QDs) nanoparticles with magnetic properties designed for biomodal imaging. These nanocrsytlas consists of a semiconductor quantum dot core with engineered fluorescence, which is located in a paramagnetic iron oxide shell that acts as a magnetic resonance imaging (MRI) contrast agent. Yolk-shell CdSe/ZnS@Fe2O3 nanoparticles (NPs) are synthesized via sonochemical decomposition of iron pentacarbonyl (Fe(CO)(5)) using the oleylamine (OAm) as the ligand. The sonochemical synthesis method of magnetic fluorescent NPs that can be used as MRI contrast agents provided advantages such as improved quantum efficiency and homogeneous size distributions. It has been determined that the luminescence efficiency of quantum dots decreases in coatings that can be made at high temperatures by thermal decomposition. In order to eliminate the disadvantage of elevated temperatures, the sonochemical decomposition method, which allows coating at low temperatures, has been used. With this method, yolk-shell (CdSe/ZnS@Fe2O3) nanoparticles were produced with high photoluminescence quantum efficiency and homogeneous size distributions. The synthesis magnetic fluorescent NPs optimized was determined to have the injection temperature of Fe(CO)(5) at 60 degrees C, Fe(CO)(5)/CdSe@ZnS ratio 0.7, OAm/Fe(CO)(5) volume ratio 1.43 with an oxidation time 5 min. Under these conditions, the quantum efficiency was found to be 78 %, nanoparticle sizes between 11-14 nm and r(1) value was 0.199, r(2) value was 0.518 in MRI analysis. These optically active magnetic fluorescent nanoparticles as positive contrast agents (T1 weighted) are predicted to pave the way for the future of advanced bio-imaging systems.Article Citation - WoS: 14Citation - Scopus: 13Spectrally Tunable White Light-Emitting Diodes Based on Carbon Quantum Dot-Doped Poly(N-Vinylcarbazole) Composites(Amer Chemical Soc, 2024-01-26) Sahin Tiras, Kevser; Bicer, Aysenur; Soheyli, Ehsan; Mutlugun, EvrenElectroluminescent white light-emitting diodes (WLEDs) are always of great interest for emerging display applications. Carbon-based quantum dots (CQDs) are the newest emerging nanoscale materials that can be employed for this purpose, owing to their broad and bright light emission properties. In the present work, highly luminescent CQDs with an emission quantum yield of 60% were prepared via a colloidal solvothermal method and subsequent silica gel column chromatography. The photoluminescence (PL) peak was located at 550 nm possessing yellow emission, with a full width at half-maximum of 98 nm and a relatively long lifetime of 10.23 ns through a single-exponential recombination pathway. CQDs were employed in an electroluminescent device architecture of an ITO/PEDOT:PSS/TFB/CQD:PVK/TPBi/LiF/Al structure and blended with poly(N-vinylcarbazole) (PVK) to evaluate their ability to reach white electroluminescent emission. Results confirmed a high external quantum efficiency (EQE) of 0.76% and a maximum luminescence of 774.3 cd<middle dot>m(-2). Tuning the ratio between CQDs and PVK from 1:10.25 to 1:5.75 resulted in a systematic shift in CIE x-y coordinates from 0.23-0.26 to 0.21-0.24, located close to the cool white region. The results of the present study can be considered a step forward in fabricating efficient WLEDs based on low-cost CQDs.Article Citation - WoS: 16Citation - Scopus: 17Solid-State Encapsulation and Color Tuning in Films of Cesium Lead Halide Perovskite Nanocrystals for White Light Generation(Amer Chemical Soc, 2019-01-30) Torun, Ilker; Altintas, Yemliha; Yazici, Ahmet Faruk; Mutlugun, Evren; Onses, M. SerdarPerovskite nanocrystals (PNCs) are highly demanding nanomaterials for solid-state lighting applications. A challenge for their exploitation in practical applications is the insufficient ambient and water stability associated with their ionic nature. Here we report a novel route for solid-state encapsulation of films of perovskite nanocrystals (PNCs) through vapor-phase deposition of a thin and hydrophobic layer of fluoroalkyltrichlorosilanes (FAS). High quality nanoscale crystals of CsPbBr3 were synthesized with well established colloidal methods and coated on solid substrates. The films of PNCs were then subjected to vapor of FAS for short durations of time (<60 s) in ambient atmosphere, resulting in deposition of a thin (<20 nm) hydrophobic layer. Besides providing a barrier for water and humidity, the vapor-phase deposition of FAS was accompanied by the blue shift of the emission wavelength of the PNCs. The color shift results from the partial exchange of Br with Cl anions, which emerge during the self-hydrolysis of the silane molecules. Throughout this process, we demonstrate the enhanced water stability of the films of PNCs and fine tunability of the wavelength in films from 516 nm to 488 nm. The fabrication of a white-light-emitting diode and tunability of the color coordinates with the duration of the FAS deposition were demonstrated. The rapid, scalable, and inexpensive solid-state encapsulation approach shows great promise for films of halide perovskites.Conference Object Simple, Sustainable Fabrication of Fully Solution-Processed, Transparent, Metal-Semiconductor Photodetectors Using a Surgical Blade as an Alternative to Conventional Tools(SPIE - The International Society for Optics and Photonics, 2022-05-24) Savas, Muzeyyen; Yazici, Ahmet Faruk; Arslan, Aysenur; Mutlugun, Evren; Erdem, Talha; Yazic, Ahmet Faruk; Erdem1, TalhaFabrication of optoelectronic devices relies on the expensive, energy-consuming conventional tools such as chemical vapor deposition, lithography, and metal evaporation. Furthermore, the films used in these devices are usually deposited at elevated temperatures and under vacuum that impose further restrictions to the device fabrication. Developing an alternative technology would contribute to the efforts on achieving a more sustainable optoelectronics technology. Keeping this focus in our focus, here we present a simple technique to fabricate visible photodetectors. These fully solution-processed and transparent metal-semiconductor-metal photodetectors employ silver nanowires (Ag NW) as the transparent electrodes replacing the indium-tin oxide (ITO) commonly used in optoelectronic devices. By repeatedly spin coating Ag NWs on a glass substrate followed by the coating of ZnO nanoparticles, we obtained a highly conductive transparent electrode reaching a sheet resistance of 95 Omega/square as measured by the four-probe method. Optical spectroscopy revealed that the transmittance of the Ag NW-ZnO films was 84% at 450 nm while transmittance of the ITO films was 90% at same wavelength. Following the formation of the conductive film, we scratched it using a heated surgical blade to open a gap. The scanning electron microscope images indicate that a gap of similar to 30 mm is opened forming an insulating line. As the active layer, we drop-casted red-emitting CdSe/ZnS core-shell quantum dots (QDs) on to this gap to form a metal-semiconductor-metal photodetector. These visible QD- based photodetectors exhibited responsivities and detectivities up to 8.5 mA/W and 0.95x10(9) Jones, respectively. These proof-of-concept photodetectors show that the environmentally friendly, low- cost, and energy-saving technique presented here can be an alternative to conventional, more expensive, and energy-hungry techniques while fabricating light-harvesting devices.Article Citation - WoS: 4Citation - Scopus: 4Rec. 2100 Color Gamut Revelation Using Spectrally Ultranarrow Emitters(SPIE - Society of Photo-Optical Instrumentation Engineers, 2017-11-22) Genc, Sinan; Uguz, Mustafa; Yilmaz, Osman; Mutlugun, EvrenWe theoretically simulate the performance of ultranarrow emitters for the first time to achieve record high coverage for the International Telecommunication Union Radiocommunication Sector BT. 2100 (Rec. 2100) and National Television System Committee (NTSC) color gamut. Our results, employing more than 130-m parameter sets, include the investigation into peak emission wavelength and full width at half maximum (FWHM) values for three primaries that show ultranarrow emitters, i.e., nanoplatelets are potentially promising materials to fully cover the Rec. 2100 color gamut. Using ultranarrow emitters having FWHM as low as 6 nm can provide the ability to attain 99.7% coverage area of the Rec. 2100 color gamut as well as increasing the NTSC triangle to 133.7% with full coverage. The parameter set that provides possibility to fully reach Rec. 2100 also has been shown to match with D65 white light by making use of the correct combination of those three primaries. Furthermore, we investigate the effect of the fourth color component on the CIE 1931 color space without sacrificing the achieved coverage percentages. The investigation into the fourth color component, cyan, is shown for the first time to enhance the Rec. 2100 gamut area to 127.7% with 99.9% coverage. The fourth color component also provides an NTSC coverage ratio of 171.5%. The investigation into the potential of emitters with ultranarrow emission bandwidth holds great promise for future display applications. (C) 2017 Society of Photo-Optical Instrumentation Engineers (SPIE)