Scopus İndeksli Yayınlar Koleksiyonu
Permanent URI for this collectionhttps://hdl.handle.net/20.500.12573/395
Browse
16 results
Search Results
Article Enhanced Photoluminescence and Stability of CsPbBr3 Perovskite Nanocrystals Through AuCl Doping(Springer, 2026-02) Khorasani, Azam; Mutlugun, EvrenThis study delves into the transformative effects of inorganic gold chloride (AuCl) doping on all-inorganic cesium lead bromide (CsPbBr3) colloidal perovskite quantum dots (PeQDs). Using a precise hot injection synthesis method, AuCl was introduced at concentrations ranging from 0 to 10%, enabling a comprehensive analysis of its impact on the structural, morphological, and optical characteristics of CsPbBr3 PeQDs. We systematically investigated how varying AuCl levels influence photoluminescence (PL), PL quantum yield (PLQY), and the stability of these quantum dots. Advanced characterization techniques, including X-ray diffraction (XRD), scanning transmission electron microscopy (STEM), energy dispersive X-ray analysis (EDX), Fourier-transform infrared spectroscopy (FTIR), UV-Vis absorption, steady-state PL, absolute PL measurement, and time-resolved PL (TRPL), provided a detailed insight into these changes. Our findings indicate that AuCl doping is successfully integrated into CsPbBr3 PeQDs, with 5% identified as the optimal concentration. At this level, the quantum dots show enhanced PLQY, superior crystallinity, and increased stability at 50 degrees C and in ethanol solvent compared to undoped samples. While higher doping levels reduce QY and PL slightly, they still outperform the undoped CsPbBr3 PeQDs. These results demonstrate that AuCl doping can fine-tune the structural and optical properties of CsPbBr3 PeQDs, marking a significant step forward in developing tailored materials for advanced optoelectronic applications.Article Performance Boost in QLEDs Using Octanethiol-Capped Core/Shell Quantum Dots(IOP Publishing Ltd, 2026-01-07) Yazici, Ahmet F.; Yuruc, Adnan M.; Kelestemur, Yusuf; Serin, Ramis Berkay; Kacar, Rifat; Ulku, Alper; Mutlugun, EvrenQuantum dots attract significant attention as one of the most promising colloidal nanocrystals with unique optical properties and potential applications for the next generation of display technology. In this paper, we evaluate the performance of CdZnSeS-based alloyed-shell quantum dots (QDs) for electroluminescence devices upon additional shell growth and ligand exchange. This includes core/shell (C/S) and core/shell/shell (C/S/S) QDs, whose latter includes an additional ZnS shell and octanethiol (OT) ligands. We present detailed characterizations of QDs using transmission electron microscopy, XRD, and various spectroscopic techniques and demonstrate their QD light emitting (QLEDs). We find the photoluminescence quantum yield of C/S/S QDs increased from 68.8% to 88.7% compared to C/S QDs whereas the emission linewidth narrows from 22.2 nm to 20.8 nm. QLEDs fabricated with C/S/S QDs exhibit a higher peak external quantum efficiency (EQE) of 4.1% and maximum luminance of 85 000 cd m-2, compared to 2.3% EQE and 67 000 cd m-2 for C/S QLEDs. In this respect, the OT-assisted shell growth significantly improves the optical property of QDs and performance of QLEDs, likely attributed to the enhanced charge balance and increased radiative recombination rate.Article Citation - WoS: 1Citation - Scopus: 1Ultra-Durable Information-Encoded Anti-Counterfeiting Self-Assembled Nanocrystal Labels(Wiley-VCH Verlag GmbH, 2025-11-28) Haddadifam, Taha; Shabani, Farzan; Kalay, Mustafa; Khaligh, Aisan; Mutlugun, Evren; Onses, Mustafa Serdar; Demir, Hilmi VolkanForgery, a serious universal problem, is causing huge economic losses every year. Against forgery, information-encoded labelling systems have attracted significant attention for a diverse range of anti-counterfeiting applications. Here, cost-effective and ultra-durable nanocrystal-based labels are proposed and demonstrated in which information can be encoded as physically unclonable functions (PUFs) of hardware-oriented security systems. The fabrication method of the PUFs is based on the self-assembly of colloidal quantum wells (CQWs) and generation of unclonable features within their pattern at a liquid-liquid interface. These CQW PUFs are analyzed with well-known statistical tests, which show a uniqueness level of 0.5060 +/- 0.0323 and prove their randomness. In addition, a feature-matching algorithm is used to authenticate these information-encoded CQW PUFs. For the safety of the semiconductor chips, a CQW PUF is attached to the surface of the chip to protect against hardware cyber-attacks. Eventually, fabricated labels are examined against high temperatures and moisture environments. The fabricated CQW label is durable for a period of 150 days it is tested, demonstrating ultra-high stability of the label. High stability and durability, cost-effectiveness, and high encoding capacity make these proposed nanocrystal labels extremely attractive for large-scale commercialization.Article Zinc Chalcogenide Based Shell Layers for Colloidal Quantum Wells(Wiley, 2025-04-27) Aldemir, Cagatay Han; Yazici, Ahmet Faruk; Ergezer, Nehir; Korkmaz, Taha Can; Mutlugun, Evren; Kelestemur, YusufColloidal quantum wells, also known as colloidal nanoplatelets (NPLs), have emerged as a promising class of materials for light-emitting devices (LEDs). However, the most widely studied core/shell NPLs, which rely on cadmium-based shell layers, face challenges due to toxicity concerns and improper charge confinement. To address these limitations, a new synthetic approach is presented that enables the controlled growth of zinc chalcogenide-based shell layers on NPLs. The synthesized CdSe/ZnSe core/shell NPLs exhibit emission between 615 and 630 nm, with a moderate photoluminescence quantum yield (PL-QY) of 40-50%. It is also demonstrated that the lateral dimensions of the CdSe core NPLs significantly affect the optical properties of the core/shell heterostructures, with smaller lateral dimensions resulting in narrower emission linewidths as low as 20 nm. Further passivation of these core/shell NPLs with an additional ZnS shell layer significantly increases the PL-QY up to 80-90%. Finally, the device performance of these two core/shell NPLs is investigated by fabricating solution-processed LEDs. With LEDs incorporating CdSe/ZnSe/ZnS core/multi-shell NPLs as the active light-emitting layer, an external quantum efficiency (EQE) of 3.82% and a maximum brightness of 6477 cd m-2 is obtained. These findings underscore the significant potential of zinc chalcogenide-based shell layers in advancing colloidal NPLs toward high-performance light-emitting devices.Article Citation - WoS: 13Citation - Scopus: 13Tuning the Shades of Red Emission in InP/ZnSe Nanocrystals With Narrow Full Width for Fabrication of Light-Emitting Diodes(Amer Chemical Soc, 2023-10-13) Soheyli, Ehsan; Bicer, Aysenur; Ozel, Sultan Suleyman; Tiras, Kevser Sahin; Mutlugun, Evren; Sahin Tiras, KevserWhile Cd-based luminescent nanocrystals (NCs) are the most mature NCs for fabricating efficient red light-emitting diodes (LEDs), their toxicity related limitation is inevitable, making it necessary to find a promising alternative. From this point of view, multishell-coated, red-emissive InP-based NCs are excellent luminescent nanomaterials for use as an emissive layer in electroluminescent (EL) devices. However, due to the presence of oxidation states, they suffer from a wide emission spectrum, which limits their performance. This study uses tris-(dimethyl-amino)-phosphine (3DMA-P) as a low-cost aminophosphine precursor and a double HF treatment to suggest an upscaled, cost-effective, and one-pot hot-injection synthesis of purely red-emissive InP-based NCs. The InP core structures were coated with thick layers of ZnSe and ZnS shells to prevent charge delocalization and to create a narrow size distribution. The purified NCs showed an intense emission signal as narrow as 43 nm across the entire red wavelength range (626-670 nm) with an emission quantum efficiency of 74% at 632 nm. The purified samples also showed an emission quantum efficiency of 60% for far-red wavelengths of 670 nm with a narrow full width of 50 nm. The samples showed a relatively long average emission lifetime of 50-70 ns with a biexponential decay profile. To demonstrate the practical ability of the prepared NCs in optoelectronics, we fabricated a red-emissive InP-based LEDs. The best-performing device showed an external quantum efficiency (EQE) of 1.16%, a luminance of 1039 cd m(-2), and a current efficiency of 0.88 cd A(-1).Article Citation - WoS: 1Citation - Scopus: 1Tailoring Quantum Dot Shell Thickness and Polyethylenimine Interlayers for Optimization of Inverted Quantum Dot Light-Emitting Diodes(MDPI, 2024-07-11) Yazici, Ahmet F.; Ocal, Sema Karabel; Bicer, Aysenur; Serin, Ramis B.; Kacar, Rifat; Ucar, Esin; Mutlugun, EvrenQuantum dot light-emitting diodes (QLEDs) hold great promise for next-generation display applications owing to their exceptional optical properties and versatile tunability. In this study, we investigate the effects of quantum dot (QD) shell thickness, polyethylenimine (PEI) concentration, and PEI layer position on the performance of inverted QLED devices. Two types of alloyed-core/shell QDs with varying shell thicknesses were synthesized using a one-pot method with mean particle sizes of 8.0 +/- 0.9 nm and 10.3 +/- 1.3 nm for thin- and thick-shelled QDs, respectively. Thick-shelled QDs exhibited a higher photoluminescence quantum yield (PLQY) and a narrower emission linewidth compared to their thin-shelled counterparts. Next, QLEDs employing these QDs were fabricated. The incorporation of PEI layers on either side of the QD emissive layer significantly enhanced device performance. Using PEI on the hole transport side resulted in greater improvement than on the electron injection side. Sandwiching the QD layer between two PEI layers led to the best performance, with a maximum external quantum efficiency (EQE) of 17% and a peak luminance of 91,174 cd/m2 achieved using an optimized PEI concentration of 0.025 wt% on both electron injection and hole injection sides. This study highlights the critical role of QD shell engineering and interfacial modification in achieving high-performance QLEDs for display applications.Article Citation - WoS: 9Citation - Scopus: 11Natural Wax-Stabilized Perovskite Nanocrystals as Pen-On Inks and Doughs(Amer Chemical Soc, 2022-04-19) Ocal, Sema Karabel; Kiremitler, N. Burak; Yazici, Ahmet Faruk; Celik, Nusret; Mutlugun, Evren; Onses, M. Serdar; Karabel Ocal, SemaPerovskite nanocrystals (PNCs) are emerging luminescent materials for a wide range of technological applications. The broad adaptation of PNCs will be greatly improved by addressing their intrinsically low stability and developing processes for their assembly into 2D and 3D structures using facile approaches. Inspired by the mechanism of natural protection of leaves, this paper proposes natural carnauba wax (CW) as an encapsulation material for PNCs. The synthesis of PNCs is performed in the presence of CW, which is derived from the leaves of Copernicia prunifera palm. CW acts as a solvent and replaces the commonly used octadecene in the preparation of PNCs. The facile synthesis in CW results in PNCs with greatly improved thermal, water, and air stability. Furthermore, the thermal and mechanical properties make PNC-Wax a highly suitable solid ink for versatile processing of these materials into 2D and 3D architectures. PNC-Wax can be printed via a pen-on-paper approach by heating at modest temperatures. The rapid plasticization of PNC-Wax by mechanical agitation enables hand-shaping of the material in a manner similar to playdoughs, which would possibly enable the versatile use of this material for various applications.Article Citation - WoS: 12Citation - Scopus: 14Nanowire-Shaped MoS2@MoO3 Nanocomposites as a Hole Injection Layer for Quantum Dot Light-Emitting Diodes(Amer Chemical Soc, 2022-08-01) Bastami, Nasim; Soheyli, Ehsan; Arslan, Aysenur; Sahraei, Reza; Yazici, Ahmet Faruk; Mutlugun, EvrenMolybdenum disulfides and molybdenum trioxides are structures that possess the potential to work as efficient charge transport layers in optoelectronic devices. In the present study, as opposed to the existing Mo-based nanostructures in flake, sheet, or spherical forms, an extremely simple and low-cost hydrothermal method is used to prepare nanowires (NWs) of MoS2@MoO3 (MSO) composites. The synthesis method includes several advantages including easy handling and processing of inexpensive precursors to reach stable MSO NWs without the need for an oxygen-free medium, which would facilitate the possibility of mass production of these nanostructures. The structural analysis confirmed the formation of MSO nanocomposites with different Mo valence states, as well as NWs of average length and diameter of 70 nm and 5 nm, respectively. In order to demonstrate their potential for optoelectronic applications, MSO NWs were blended into hole injection layers (HILs) in quantum dot-based light emitting diodes (QLEDs). Electroluminescence measurements show a substantial enhancement in both luminance (from 44,330 to 68,630 cd.m-2) and external quantum efficiency (from 1.6 to 2.3%), based on the increase in the ratio of MSO NWs from 3 to 10%. Interestingly, the addition of 10% volume of MSO NWs resulted in a remarkably smoother HIL with improved current efficiency and stability in green-emitting QLEDs. The simplicity and cost-effective features of the synthesis method along with outstanding favorable morphology demonstrated their ability to enhance the QLED performance and mark them as promising agents for optoelectronics.Article Citation - WoS: 51Citation - Scopus: 51Multiplexed Patterning of Cesium Lead Halide Perovskite Nanocrystals by Additive Jet Printing for Efficient White Light Generation(Elsevier Science SA, 2020-01) Altintas, Yemliha; Torun, Ilker; Yazici, Ahmet Faruk; Beskazak, Emre; Erdem, Talha; Onses, M. Serdar; Mutlugun, Evren; Serdar Onses, M.Inorganic perovskite nanocrystals (PNCs) offer the ability to precisely but also flexibly control the peak emission wavelength while also possessing narrow-band emission spectra and high quantum yields. Owing to these features, PNCs have been already employed as color converters on LEDs. Nevertheless, the anion exchange reactions that prevent the blending of perovskites of different colors remain as an important bottleneck. As a remedy to this issue, here we employ additive jet printing to form separated stripes of these nanocrystals. Within this framework, we first present the synthesis of CsPbBr3 and CsPbBrxI3-x nanocrystals spanning the whole visible regime and optimize the cleaning procedure to obtain PNCs possessing photoluminescence quantum yields as high as 91% and emission linewidths as narrow as 15 nm, making them suitable for high quality white light generation. Next, we employ electrohydrodynamic jet printing to form closely spaced stripes of PNCs of various colors and integrated these films with a blue LED to create a white LED. Our proof-of-concept LED achieves high photometric performance as it possesses a color rendering index of 91.3, luminous efficacy of optical radiation > 300 lm/W-opt, and correlated color temperature of ca. 7000 K. We believe that additive jet printing technique will pave the way for a ubiquitous use of these PNCs in light-emitting devices in the near future.Conference Object Citation - WoS: 65Citation - Scopus: 77Improving Performance and Stability in Quantum Dot-Sensitized Solar Cell Through Single Layer Graphene/Cu2S Nanocomposite Counter Electrode(Pergamon-Elsevier Science Ltd, 2020-01) Akman, Erdi; Altintas, Yemliha; Gulen, Mahir; Yilmaz, Mucahit; Mutlugun, Evren; Sonmezoglu, SavasIn this work, we presented an effective nanocomposite to modify the Cu2S film by employing single layer graphene (SLG) frameworks via chemical vapor deposition, and utilized this nanocomposite as counter electrode (CE) with CdSe/ZnS core/shell quantum dots for highly stable and efficient quantum dot-sensitized solar cell (QDSSC). Furthermore, Cu2S film is directly synthesized on SLG framework by electrodeposition method. Using this nanocomposite as CE, we have achieved the high efficiency as high as 3.93% with fill factor of 0.63, which is higher than those with bare Cu2S CE (3.40% and 0.57). This remarkable performance is attributed to the surface area enhancement by creating nanoflower-shape, the reduction of charge transfer resistance, improvement of catalytic stability, and the surface smoothness as well as good adhesion. More importantly, no visible color change and detachment from surface for the Cu2S@SLG nanocomposite was observed, demonstrating that the SLG framework is critical role in shielding the Cu2S structure from sulphur ions into electrolyte, and increasing the adhesion of the Cu2S structure on surface, thus preventing its degradation. Consequently, the Cu2S@SLG nanocomposite can be utilized as an effective agent to boost up the performance of QDSSCs. (c) 2019 Elsevier Ltd. All rights reserved.