Scopus İndeksli Yayınlar Koleksiyonu
Permanent URI for this collectionhttps://hdl.handle.net/20.500.12573/395
Browse
7 results
Search Results
Article Thermal Stresses in SOFC Stacks: The Role of Mismatch Among Thermal Conductivity of Adjacent Components(Tubitak Scientific & Technological Research Council Turkey, 2021-06-30) Aydin, Ozgur; Matsumoto, Go; Shiratori, YusukeGenerating power from renewable biogas in solid oxide fuel cells (SOFCs) is an environment-friendly, efficient, and promising energy conversion process. Biogas can be used in SOFCs via a reforming process for which dry reforming is more suitable as the reforming agent exists in the biogas mixture. Biogas can be directly reformed to H-2 -rich fuel stream in the anode chamber of a SOFC by the heat released during power generation. Exploiting the heat and water produced in the SOFC for internal reforming of biogas makes the energy conversion process very efficient; however, various challenges are reported. Thus, indirect internal reforming is opted for which a separate reforming domain is required. In an indirect internal reformer operating at usual conditions, dry reforming rate is quite high in the inlet and it decreases steeply toward the fuel outlet. Great temperature gradients develop over the reformer, since the dry reforming reaction is strongly endothermic. The abruptly varying rate of the reforming reaction affects the temperature fields in the adjacent components of SOFC and hence intolerable thermal stresses emerge on the SOFC components. In our preceding study, we graded the reforming domain, homogenized the temperature profile over the reforming domain, and executed performance and durability experiments. However, most of the experiments failed due to fracturing SOFC components hinting at existence of thermal stresses. In that study, we focused on minimizing the temperature gradients within the reforming domain; namely, we neglected the other processes. To eliminate the thermal stresses, we modeled the entire module of SOFC equipped with a reformer featuring a graded reforming domain. We found that the mismatch between the thermal conductivities of the adjacent module components is the major reason for the thermal stresses. When the mismatch is eliminated, thermal stresses disappear even if the reforming domain is not graded.Article Optimizing Parameters for Efficient Computation With Fully Homomorphic Encryption Schemes(Tubitak Scientific & Technological Research Council Turkey, 2025-03-21) Karaagac, Cavidan Yakupoglu; Rohloff, Kurt; Yakupoğlu Karaağaç, Cavidan; Yakupoglu, CavidanIn this study, we aim to provide a parameter selection approach for the BFVrns scheme, one of the prominent fully homomorphic encryption (FHE) schemes. Selecting parameters for lattice-based FHE schemes poses a practical challenge for both experts and nonexperts. To solve this problem, we introduce a hybrid approach that combines theoretical approach with experimental analysis. First, we employ regression analysis to examine the impact of parameters on both performance and security. The varying behavior of FHE parameters in terms of performance, security, and ciphertext expansion factor (CEF) makes parameter selection more challenging. To address this issue, we employ a multi-objective optimization algorithm to determine the optimal parameter set for performance, CEF, and security simultaneously. As a result of this optimization, we obtain an improved parameter set that enhances performance at a given security level while ensuring correctness and resistance to lattice-based attacks, maintaining at least 128-bit security. Our results achieve an average similar to 5x reduction in CEF and generally better performance compared to the parameter sets in a previous BFVrns study. Our approach serves as a semi-automated parameter selection method for the PALISADE homomorphic encryption library, a widely recognized FHE library. This study sets a precedent for other FHE libraries.Article Citation - WoS: 4Citation - Scopus: 4Natural Diterpenoid Alysine a Isolated from Teucrium Alyssifolium Exerts Antidiabetic Effect via Enhanced Glucose Uptake and Suppressed Glucose Absorption(Tubitak Scientific & Technological Research Council Turkey, 2019-10-07) Sen, Alaattin; Ayar, Buket; Yilmaz, Anil; Acar, Ozden Ozgun; Turgut, Gurbet Celik; Topcu, GulactiTeucrium species have been used in folk medicine as antidiabetic, antiinflammatory, antiulcer, and antibacterial agents. We have explored in vitro antidiabetic impacts of 2 natural diterpenoids, alysine A and alysine B, isolated from Teucrium alyssifolium. The lactate dehydrogenase (LDH) cytotoxicity assay, glucose uptake test, glucose utilization (glycogen content) test, glucose transport test, glucose absorption (a-glucosidase activity) test, insulin secretion test, RNA isolation and cDNA synthesis assay, qPCR quantification assays, and statistical analyses were carried out in the present study. Alysine A exerted the following effects at non-cytotoxic doses: Enhanced the glucose uptake, as much as the insulin in the C2C12, HepG2, and 3T3-L1 cells Increased the glycogen content in the C2C12 and HepG2 liver cells, significantly higher than the insulin and metformin Suppressed the alpha-glucosidase and the GLUT2 expression levels in the Caco-2 cells Suppressed the SGLT1 and GLUT1-5 expression levels in the Caco-2 cells Induced the insulin receptor substrate (IRS)1 and GLUT2 expression levels of the BTC6 pancreatic cells Induced the insulin receptor (INSR), IRS2, phosphoinositide 3-kinase (PI3K), GLUT4, and protein kinase (PK) expression levels of the 3T3-L1 and C2C12 cells Increased glucose transport through the Caco-2 cell layer Did not influence insulin secretion in the pancreatic BTC6 cells Consequently, these data strongly emphasized the antidiabetic action of alysine A on the particularly critical model mechanisms that assume a part in glucose homeostasis, such as glucose uptake, utilization, and storage. Moreover, the expression level of the essential genes in glucose metabolism and insulin signaling was altered in a way that the results would be antihyperglycemic. A blend of in vitro and in situ tests affirmed the antihyperglycemic action of alysine A and its mechanism. Alysine A has exercised significant and positive results on the glucose homeostasis; thus, it is a natural and pleiotropic antidiabetic agent. Advanced in vivo studies are required to clarify the impact of this compound on glucose homeostasis completely.Article Citation - WoS: 2Citation - Scopus: 2Analysis of Optical Gyroscopes With Vertically Stacked Ring Resonators(Tubitak Scientific & Technological Research Council Turkey, 2021-05-31) Hah, DooyoungWithout any moving part, optical gyroscopes exhibit superior reliability and accuracy in comparison to mechanical sensors. Microring-resonator-based optical gyroscopes emerged as alternatives for bulky conventional Sagnac interferometer sensors, especially attractive for applications with limited footprints. Previously, it has been reported that planar incorporation of multiple resonators does not bring about improvement in sensitivity for a given area because the increase in Sagnac phase accumulation does not outrun the increase of area. Therefore, it was naturally suggested to consider vertical stacking of ring resonators because then, the resonators can share the same footprint. In this work, sensitivity performances of such configurations with vertically stacked microring resonators are analyzed and compared to that of a basic (single-resonator) configuration. Through comprehensive study, it is learned that the sensitivity performance of the devices with vertically-stacked resonators (either with a single bus waveguide or with two bus waveguides) does not exceed that of the basic sensor device (single resonator with one bus waveguide), i.e. the basic structure is yet to be remained as the most efficient configuration.Article Citation - WoS: 2Citation - Scopus: 3An Asymptotic-Numerical Hybrid Method for Singularly Perturbed System of Two-Point Reaction-Diffusion Boundary-Value Problems(Tubitak Scientific & Technological Research Council Turkey, 2019-01-18) Cengizci, Suleyman; Natesan, Srinivasan; Atay, Mehmet TankThis article focuses on the numerical approximate solution of singularly perturbed systems of second-order reaction-diffusion two-point boundary-value problems for ordinary differential equations. To handle these types of problems, a numerical-asymptotic hybrid method has been used. In this hybrid approach, an efficient asymptotic method, the so-called successive complementary expansion method (SCEM) is employed first, and then a numerical method based on finite differences is applied to approximate the solution of corresponding singularly perturbed reaction-diffusion systems. Two illustrative examples are provided to demonstrate the efficiency, robustness, and easy applicability of the present method with convergence properties.Article Citation - WoS: 4Citation - Scopus: 4All-Polymer Ultrasonic Transducer Design for an Intravascular Ultrasonography Application(Tubitak Scientific & Technological Research Council Turkey, 2019-07-26) Hah, DooyoungIntravascular ultrasonography (IVUS), a medical imaging modality, is used to obtain cross-sectional views of blood vessels from inside. In IVUS, transducers are brought to the proximity of the imaging targets so that high-resolution images can be obtained at high frequency without much concern of signal attenuation. To eliminate mechanical rotation rendered in conventional IVUS, it is proposed to manufacture a transducer array on a flexible substrate and wrap it around a cylindrical frame. The transducer of consideration is a capacitive micromachined ultrasonic transducer (CMUT). The whole device needs to be made out of polymers to be able to endure a high degree of bending (radius: 1 mm) Bending of the devices leads to considerable changes in the device characteristics, including resonant frequency and pull-in voltage due to geometrical dimension changes and stress induced. The main purpose of this work is to understand the effect of bending on the device characteristics by means of finite element analysis. Another objective of the work is to understand the relationships between such an effect and the device geometries. It is learned that the bending-induced stress depends strongly on anchor width, membrane thickness, and substrate thickness. It is also learned that resonant frequency and pull-in voltage become lower in most cases because of using a flexible substrate in comparison to those of the device on a rigid substrate. Bending-induced stress increases the spring constant and hence increases resonant frequency and pull-in voltage, although this effect is relatively weaker. For most of the device geometries, pull-in voltage is too high for the polymer material to endure. This is the main drawback of the all-polymer CMUT. In order to meet the design goal of 20 MHz resonant frequency, the membrane radius has to be smaller than 7.7 mu m for a thickness of 3 mu m.Article Citation - WoS: 5Citation - Scopus: 10A New Tool for QT Interval Analysis During Sleep in Healthy and Obstructive Sleep Apnea Subjects: A Study on Women(Tubitak Scientific & Technological Research Council Turkey, 2013) Kaya, Kemal Alican; Yilmaz, BulentBy monitoring the Q wave/T wave (QT) interval computed from electrocardiography (ECG) signals during sleep, it is possible to create a link between the ventricular repolarization and sleep stages. In this study, we aimed to find a robust and simple approach to automatically determine the fiducials on each 30-s sleep epoch, such as the Q, R, and T-end points, on long sleep ECG recordings in order to statistically analyze the effect of obstructive sleep apnea (OSA) and sleep stages on QT intervals. This is a retrospective study in which the ECG data extracted from the polysomnography recordings of 7 healthy women and 5 women with OSA, acquired in a sleep laboratory, were used. Experts annotated the sleep stage and OSA presence information for each 30-s epoch. Later, we visually selected epochs with clean signals from a total of 8324 epochs. On the selected epochs, we determined R peaks on each heartbeat, and by aligning each ECG portion corresponding to a heartbeat using those R points, we computed an average ECG signal for each epoch. On the average ECG signals, we developed a novel approach to find the Q and T-end points. With the help of Bazzet's formula, we computed the corrected QT interval (QTc) values for each epoch using the QT and the median RR interval. Finally, we analyzed the QTc values for the different sleep stages and healthy or OSA groups. We employed statistical approaches such as the Mann-Whitney U test, Freidman's test, and the Wilcoxon signed-rank test. As a result of this study, we found that OSA has a prolongation effect on the total duration of the ventricular depolarization and repolarization. We also observed that the QTc values computed in each sleep stage were significantly different between the healthy and OSA groups. Additionally, we discovered that within the healthy group, the QTc values were distinctive in the different sleep stages.