WoS İndeksli Yayınlar Koleksiyonu
Permanent URI for this collectionhttps://hdl.handle.net/20.500.12573/394
Browse
24 results
Search Results
Article Citation - WoS: 19Citation - Scopus: 22The Impact of Organic Cotton Use and Consumer Habits in the Sustainability of Jean Production Using the LCA Approach(Springer Heidelberg, 2022-09-14) Fidan, Fatma Sener; Aydogan, Emel Kizilkaya; Uzal, Nigmet; Şener Fidan, Fatma; Kızılkaya Aydoğan, EmelDue to the rise in clothing consumption per person and growing consumer awareness of environmental issues with products, the textile industry must adopt new practices for improving sustainability. The current study thoroughly investigates the benefits of using organic cotton fiber instead of conventional cotton fiber. Because of the extensive use of natural resources in the production of cotton, the primary raw material for textiles, which accounts for the environmental effects of a pair of jeans, a life cycle assessment methodology was used to examine these effects in four different scenarios. The additional scenarios were chosen based on the user preferences for washing temperatures, drying methods, and the type of cotton fiber used in the product. The environmental impact categories of global warming potential, eutrophication potential terrestrial ecotoxicity potential, acidification potential, and freshwater ecotoxicity potential were analyzed by the CML-IA method. The life cycle assessment results revealed that the lowest environmental impacts were obtained for scenario 4 with 100% organic cotton fiber with an improvement of 87% in terrestrial ecotoxicity potential and 59% in freshwater ecotoxicity potential. All of the selected environmental impacts of a pair of jeans are reduced in all scenarios when organic cotton is used. Additionally, consumer habits had a significant impact on all impact categories. Using a drying machine instead of a line dryer during the use phase is just as important as the washing temperature. The environmental impact hotspots for a pair of jeans were revealed to be the eutrophication potential, acidification potential, and global warming potential categories during the use phase, and the terrestrial ecotoxicity potential and freshwater ecotoxicity potential categories during the fabric manufacturing including cotton cultivation. The use of organic cotton as a raw material in manufacturing processes, as well as consumer preferences for washing temperature and drying methods, appears to have significant environmental impacts on a pair of jeans' further sustainable life cycle.Article Citation - WoS: 6Citation - Scopus: 7Sustainability Assessment of Denim Fabric Made of PET Fiber and Recycled Fiber From Postconsumer PET Bottles Using LCA and LCC Approach With the EDAS Method(Wiley, 2024-11-01) Fidan, Fatma Sener; Aydogan, Emel Kizilkaya; Uzal, NigmetThe textile industry is under pressure to adopt sustainable production methods because its contribution to global warming is expected to rise by 50% by 2030. One solution is to increase the use of recycled raw material. The use of recycled raw material must be considered holistically, including its environmental and economic impacts. This study examined eight scenarios for sustainable denim fabric made from recycled polyethylene terephthalate (PET) fiber, conventional PET fiber, and cotton fiber. The evaluation based on the distance from average solution (EDAS) multicriteria decision-making method was used to rank scenarios according to their environmental and economic impacts, which are assessed using life cycle assessment and life cycle costing. Allocation, a crucial part of evaluating the environmental impact of recycled products, was done using cut-off and waste value. Life cycle assessments reveal that recycled PET fiber has lower freshwater ecotoxicity and fewer eutrophication and acidification impacts. Cotton outperformed PET fibers in human toxicity. Only the cut-off method reduces potential global warming with recycled PET. These findings indicated that recycled raw-material life cycle assessment requires allocation. Life cycle cost analysis revealed that conventional PET is less economically damaging than cotton and recycled PET. The scenarios were ranked by environmental and economic impacts using EDAS. This ranking demonstrated that sustainable denim fabric production must consider both economic and environmental impacts. Integr Environ Assess Manag 2024;00:1-19. (c) 2024 The Author(s). Integrated Environmental Assessment and Management published by Wiley Periodicals LLC on behalf of Society of Environmental Toxicology & Chemistry (SETAC).Article Citation - WoS: 6Citation - Scopus: 6Surface Coating of Polyamide Reverse Osmosis Membranes With Zwitterionic 3-(3,4 (l-DOPA) for Forward Osmosis(Wiley, 2019-03-27) Saki, Seda; Uzal, NigmetTo overcome low permeability and fouling problems of membranes used in FO processes, modification is needed to improve the hydrophilicity, permeability and selectivity of membranes. In this work, thin film composite (TFC) commercial polyamide RO membranes (BW30-LE, SW30-HR, AG and AC) were functionalized with zwitterionicl-DOPA. The effect ofl-DOPA on the morphology of membranes was determined via SEM, FT-IR, AFM and contact angle analysis. Thel-DOPA modified BW30-LE membrane showed excellent properties with 46 degrees contact angle and 3.8 L/m(2)hbar water permeability and 0.83 L/m(2)h salt permeability. Although,l-DOPA modified BW30-LE membrane had the highest water flux and hydrophilicity,l-DOPA modified SW30-HR membrane showed higher FO flux with 9.38 L/m(2)h than BW 30 membrane with 3.5 L/m(2)h at 50 g/L NaCl draw solution. Introducing hydroxyl and carboxyl ionic groups on the membrane surface withl-DOPA coating enhanced the FO performance and water permeability which provide a new insight in FO applications.Article Citation - WoS: 5Citation - Scopus: 7Robust Multicriteria Sustainability Assessment in Urban Transportation(ASCE-Amer Soc Civil Engineers, 2023-06) Gulcimen, Sedat; Aydogan, Emel Kizilkaya; Uzal, NigmetDeveloping methodologies to facilitate the planning of sustainable transport systems for decision makers (DMs) is becoming more critical. This study proposed a methodological framework for sustainable urban transportation to make decisions during urban transportation's design and planning stages. Urban transportation alternatives were evaluated by sustainability indicators that considered a triple bottom line approach's environmental, economic, and social aspects. To choose the best alternative sustainable transportation scenarios, two multicriteria decision-making (MCDM) methods, for example, a hesitant fuzzy analytical hierarchy process (HF-AHP) and multiple attribute utility model (MAUT), were integrated. First, eight sustainable transportation indicators that considered data availability from the transport sector were selected. The weights of the selected indicators were calculated using an HF-AHP. These indicators included carbon dioxide (CO2) emissions, energy consumption, depletion of nonrenewable resources, operational and maintenance costs, fuel and taxes, the number of fatalities or injuries, and motor vehicles for public transport per 10,000 population. Finally, sensitivity analysis was applied to validate the robustness. Based on HF-AHP results, the number of fatalities or injuries was the most significant among the eight indicators, with a 0.158 normalized weight (N-i). The results of this integrated methodology highlighted that Alternative 11, which was dominated by low-motorized vehicles (low-MVs), was the best sustainable alternative and Alternative 1 was the worst sustainable alternative, which was dominated by high-MVs with 0.69 and 0.27 total utility values, respectively. Low-motorized urban transportation alternatives showed higher sustainable performances than the motorized and high-motorized alternatives. This study proposed a novel and robust methodology for decisions on sustainable urban transportation projects and renovating current urban transportation systems.Article Citation - WoS: 57Citation - Scopus: 73Removal of Heavy Metals from Aluminum Anodic Oxidation Wastewaters by Membrane Filtration(Springer Heidelberg, 2018-05-27) Ates, Nuray; Uzal, NigmetAluminum manufacturing has been reported as one of the largest industries and wastewater produced from the aluminum industry may cause significant environmental problems due to variable pH, high heavy metal concentration, conductivity, and organic load. The management of this wastewater with a high pollution load is of great importance for practitioners in the aluminum sector. There are hardly any studies available on membrane treatment of wastewater originated from anodic oxidation. The aim of this study is to evaluate the best treatment and reuse alternative for aluminum industry wastewater using membrane filtration. Additionally, the performance of chemical precipitation, which is the existing treatment used in the aluminum facility, was also compared with membrane filtration. Wastewater originated from anodic oxidation coating process of an aluminum profile manufacturing facility in Kayseri (Turkey) was used in the experiments. The characterization of raw wastewater was in very low pH (e.g., 3) with high aluminum concentration and conductivity values. Membrane experiments were carried out with ultrafiltration (PTUF), nanofiltration (NF270), and reverse osmosis (SW30) membranes with MWCO 5000, 200-400, and 100 Da, respectively. For the chemical precipitation experiments, FeCl3 and FeSO4 chemicals presented lower removal performances for aluminum and chromium, which were below 35% at ambient wastewater pH 3. The membrane filtration experimental results show that, both NF and RO membranes tested could effectively remove aluminum, total chromium and nickel (> 90%) from the aluminum production wastewater. The RO (SW30) membrane showed a slightly higher performance at 20 bar operating pressure in terms of conductivity removal values (90%) than the NF 270 membrane (87%). Although similar removal performances were observed for heavy metals and conductivity by NF270 and SW30, significantly higher fluxes were obtained in NF270 membrane filtration at any pressure that there were more than three times the flux values in SW30 membrane filtration. Due to the lower heavy metal (< 65%) and conductivity (< 30%) removal performances of UF membrane, it could be evaluated as pretreatment followed by NF filtration to protect and extend NF membrane life. The water treated by both NF and RO could be recycled back into the process to be reused with economic and environmental benefits.Article Citation - WoS: 15Citation - Scopus: 14Removal of Pesticides From Secondary Treated Urban Wastewater by Reverse Osmosis(Springer Heidelberg, 2022-04-11) Ates, Nuray; Uzal, Nigmet; Yetis, Ulku; Dilek, Filiz B.The residues of pesticides that reach water resources from agricultural activities in several ways contaminate drinking water resources and threaten aquatic life. This study aimed to investigate the performance of three reverse osmosis (RO) membranes (BW30-LE, SW30-XLE, and GE-AD) in rejecting four different pesticides (tributyl phosphate, flutriafol, dicofol, and irgarol) from secondary treated urban wastewater and also to elucidate the mechanisms underlying the rejection of these pesticides. RO experiments were conducted using pesticide-spiked wastewater samples under 10 and 20 bar transmembrane pressures (TMP) and membrane performances were evaluated. Overall, all the membranes tested exhibited over 95% rejection performances for all pesticides at both TMPs. The highest rejections for tributyl phosphate (99.0%) and irgarol (98.3%) were obtained with the BW30-LE membrane, while for flutriafol (99.9%) and dicofol (99.1%) with the GE-AD membrane. The increase in TMP from 10 to 20 bar did not significantly affect the rejections of all pesticides. The rejection performances of RO membranes were found to be governed by projection area as well as molecular weight and hydrophobicity/hydrophilicity of pesticides. Among the membranes tested, the SW30-XLE membrane was the most prone to fouling due to the higher roughness.Article Citation - WoS: 60Citation - Scopus: 66Preparation and Characterization of PSF/PEI Nanocomposite Membranes for Oil/Water Separation(Springer Heidelberg, 2018-06-26) Saki, Seda; Uzal, NigmetUltrafiltration (UF) is one of the significant advanced processes for oily wastewater treatment due to its clear advantages, for instance, ease in operation and efficient separation. The main drawback of these processes is the fouling problem and many researchers' effort on fabrication of high-performance membranes with higher hydrophilicity and antifouling properties. In this study, flat-sheet polysulfone (PSF)/polyethylenimine (PEI)/CaCO3 nanocomposite membranes were prepared by phase inversion method for oil/water emulsion separation. Structural properties of membranes were characterized by SEM, FT-IR, contact angle, tensile strength, and atomic force microscopy analysis. Increasing the CaCO3 nanoparticle loading exhibited the increased the water flux and BSA rejection. PSF/PEI/10 wt% CaCO3 nanocomposite membranes have 145 L/m(2) h water flux at 2 bar with a contact angle of 84 degrees and with 92% BSA rejection. All prepared CaCO3 nanocomposite membranes reached similar oil rejections at above 90%. Besides the higher water flux and oil removal efficiencies, 10 wt% of CaCO3 nanoparticle-blended PSF membranes has notable antifouling capacity with the highest flux recovery ratio (FRR) and lowest flux decay ratio (DR) values. The results showed that there is a great potential to use PSF/PEI/CaCO3 nanocomposite membranes for the treatment of oil water emulsions with higher permeability and antifouling capacity.Article Citation - WoS: 4Citation - Scopus: 5Predicting Potential of Pressure Retarded Osmosis Power for Different Estuaries in Turkey(Wiley, 2018-11-29) Saki, Seda; Uzal, Nigmet; Gokcek, Murat; Ates, NurayPressure retarded osmosis (PRO) is an alternative renewable energy source recovered from the salinity gradient between the fresh water (feed solution) and salty water (draw solution). In order to implement osmotic power, the site-specific characteristics including the river and sea salinity, annual flow rates, ecological restrictions were taken into account. This study revealed a comprehensive analysis for a theoretical potential of PRO process for different estuaries in Turkey. In this study, the power potential prediction of PRO process for the Ceyhan, Sakarya, and Meric Rivers were analyzed via Gibbs free energy calculations. The net annual energy production is projected to be 167, 164, and 208 GWh/y for Ceyhan, Sakarya, and Meric Rivers, respectively. Meric River has the highest energy production of 208 GWh/yr with 186 m(3)/s mean flow rate and 245 mg/L salinity. These results clearly show that Turkey's rivers having high salinity and flow rate are feasible and applicable for making the osmotic power plant economically. Thereby, it is providing essential direction to the improvement of its design, installation, and operation. The developed methodology for the evaluation of the osmotic power potential of other rivers can be considered as a basis to assess the whole potential on a worldwide level. (c) 2018 American Institute of Chemical Engineers Environ Prog, 38:e13085, 2019Article Citation - WoS: 1Citation - Scopus: 1Pre-Concentration of Municipal Wastewater Using Flocculation-Assisted Direct Ceramic Microfiltration Process: Optimization of Operational Conditions(Springer int Publ Ag, 2022-10) Ozcan, Ozlem; Sahinkaya, Erkan; Uzal, NigmetDirect ceramic microfiltration (DCMF) is an effective technology to pre-concentrate organic matter (OM) for the subsequent anaerobic energy-recovering processes and a fast, cost-effective, easy treatment process for municipal wastewater. The major problem in DCMF is the rapid fouling of the membrane. In this study, to maximize OM recovery rates and prevent membrane fouling, the DCMF process was alternately paired with dosing of a cationic polyacrylamide (PAM) flocculant and chemically enhanced primary sedimentation (CEPS). The DCMF process tested in three stages: (i) optimization of flocculant concentration (0.5, 1, 1.5, and 2 mg/L PAM) and dosing point, (ii) optimization of operational conditions (pH, filtration/backwash duration, flux, and recovery rate) to control membrane fouling, and (iii) long-term operation of the DCMF process. The influence of PAM dosage points on DCMF fouling behavior was explored, and system operating parameters in terms of OM recovery and TMP change were optimized. The CEPS + DCMF setup was discovered to be a potential option for overcoming fouling. The highest chemical oxygen demand (COD) was 520 +/- 20 mg/L in the concentrated wastewater using CEPS + DCMF experiments for 0.5 mg/L PAM. The highest OM pre-concentration was achieved at 90% recovery rate. After the optimization, COD concentration in the concentrate of the DCMF process reached 822 mg/L for the long-term (20 days) operation. The net potential energy production was calculated as 0.28 kWh/m(3) considering the theoretical COD of 1432 mg/L in the concentrate stream. As a novel approach, the CEPS + DCMF process can be used in place of conventional municipal wastewater treatment processes due to its acceptable OM removal performance, simple operation, small footprint, and potential energy generation.Article Citation - WoS: 285Citation - Scopus: 318Potential Ion Exchange Membranes and System Performance in Reverse Electrodialysis for Power Generation: A Review(Elsevier Science Bv, 2015-07) Hong, Jin Gi; Zhang, Bopeng; Glabman, Shira; Uzal, Nigmet; Dou, Xiaomin; Zhang, Hongguo; Chen, YongshengReverse electrodialysis (RED) is an emerging membrane based energy conversion process used to extract electricity by mixing two water streams of different salinities. This technique utilizes transport of cations and anions during controlled mixing of saltwater and freshwater through selective ion exchange membranes. The development of ion exchange membranes and optimization of system performance are crucial for sustainable energy capture from salinity gradients using RED. Recently, increased attention has been given to the preparation of ion exchange membranes and to understanding the factors that determine the RED power performance. This review evaluates potential ion exchange membrane materials, currently available state-of-the-art RED membranes, and their key properties. Discussion will focus on the electrochemical and physical properties of these membranes (e.g., resistance, permselectivity, and swelling) because of their significant role in RED performance throughout the system, Although an interconnected relationship exists between membrane properties, RED requires high quality membranes that are uniquely tailored to have a low resistance and high permselectivity. Moreover, harnessing this potential technology demands not only carefully optimized components but also a novel RED stack design and system optimization. The key findings and advancements needed to assure proper stack design and optimization are also described. This review paper's goal is to elucidate effective energy conversion from salinity gradients and expedite implementation of RED as the next promising renewable source of power for large-scale energy generation. (C) 2015 Elsevier B.V. All rights reserved.
- «
- 1 (current)
- 2
- 3
- »