Scopus İndeksli Yayınlar Koleksiyonu
Permanent URI for this collectionhttps://hdl.handle.net/20.500.12573/395
Browse
2 results
Search Results
Conference Object Citation - Scopus: 1On the Variation in Several Rock Properties due to Magnesium Sulfate Weathering Tests ‒ A Case Study for Limestones(International Multidisciplinary Scientific Geoconference, 2019-06-20) Köken, E.Contributions to the behavior of rock materials under various conditions provide a practical knowledge about issues relating the performance and long-term serviceability of rocks. In this study, various limestones with varying textural features were investigated in terms of their resistance against magnesium sulfate weathering tests. For this purpose, initial physico-mechanical properties of limestones were determined. Then, rock materials were subjected to magnesium sulfate weathering tests (up to 20 cycles) and the variation in physico-mechanical properties were determined for each rock type. As a result of laboratory tests, compared to initial rock properties, effective porosity (ne, %) increased in the range of 3% ‒ 14% and 12% ‒ 35% after 10th and 20th magnesium sulfate weathering cycles, respectively. Uniaxial compressive strength of rocks (UCS, MPa) decreased by 9% ‒ 24% after 10th cycles and by 32% – 58% after 20th cycles. Brazilian tensile strength of rocks (BTS, MPa) decreased in the range of 7% ‒ 19% and 20% ‒ 49% after 10th and 20th cycles, respectively. Similar to the variations in UCS and BTS, Tangential Young Modulus (Eti, GPa) also decreased at a rate of 13% ‒ 28% and 23% ‒ 64% after 10th and 20th cycles, respectively. However, the values of Tangential Poisson’s Ratio (vti) fluctuated with progressive accelerated weathering cycles, which could be linked to varying axial and lateral strain rates at 50% of UCS values for the limestones investigated. Furthermore, the variation in crack initiation stress σCI (MPa) due to progressive magnesium sulfate tests were also evaluated considering two strain-based methods and the findings showed that σCI of limestones slowly decreased with increasing weathering test cycles. It could be claimed that cyclic magnesium sulfate tests performed on rock materials would be beneficial for assessing the long-term serviceability of rocks. In this context, mud-supported limestones seem to have a greater resistance against magnesium sulfate weathering tests compared to the grain-supported ones. However, the number of samples should be increased in order to achieve a comprehensive understanding about the degradation processes of limestones. © 2021 Elsevier B.V., All rights reserved.Article Citation - Scopus: 2Comparison of Mechanical and Physical Properties of Screed With and Without Expanded Polystyrene (EPS) Particles(Yildiz Technical University, 2022-12-31) Kiliç, Fikret Merih; Yorulmaz, Hediye; Özuzun, Sümeyye; Durak, Uğur; İLkentapar, Serhan; Karahan, Okan; Atis, C. D.In this study, in order to observe the mechanical and physical properties of ordinary screed, sandy-lightweight screed and lightweight screed samples, expanded polystyrene (EPS) was used as fine aggregate and lightweight screed systems were produced by replacing sand at 100%, 50% and 0%. Samples of cement dosages of 250, 300, 350 kg/m3 were produced for lightweight screeds, sandy-lightweight screeds and ordinary screeds. Unit weight, water absorption capacity, flexural strength, compressive strength, fire resistance, abrasion and thermal conductivity tests were performed on the produced screed systems. As a result of the research, it was determined that as EPS ratio increases in screed system; unit weights decreased, water absorption rates increased. Besides, the flexural and compressive strengths, fire and abrasion resistance are also decreased. However, it was observed that the thermal conductivity coefficient reduced with the increment of EPS particles in the screed. In normal, sandy-lightweight and lightweight screeds, it was determined that as the cement dosage increased; the unit weights, flexural and compressive strengths, fire and abrasion resistance increased, water absorption capacity and the thermal conductivity coefficient decreased. © 2022 Elsevier B.V., All rights reserved.