Scopus İndeksli Yayınlar Koleksiyonu
Permanent URI for this collectionhttps://hdl.handle.net/20.500.12573/395
Browse
18 results
Search Results
Article Citation - WoS: 2Citation - Scopus: 1Fully Inorganic Colloidal CsPbBr3 Perovskite Nanocrystals with Zn-Doping and Metal Oxide Encapsulation for Luminescent Display Panels(Amer Chemical Soc, 2025-11-07) Khorasani, Azam; Soheyli, Ehsan; Mutlugun, EvrenPerovskite nanocrystals (PeNCs) are emerging as exceptional materials due to their high photoluminescence quantum yield, tunable bandgap, and excellent charge carrier mobility, enabling a wide range of colors and promising applications in optoelectronics and photovoltaics. Despite their advantages, PeNCs face stability challenges caused by environmental factors. In the presented study, a facile and versatile colloidal hot-injection method was used to apply the beneficial aspects of Zn-doping in cesium lead bromide (CsPbBr3) PeNCs. The uniform platelet-shaped Zn-doped CsPbBr3 PeNCs were prepared by doping with a 0.1 molar ratio of zinc-oleate solution in the perovskite precursors during synthesis. Then, zinc-oxide (ZnO) and nickel-oxide (NiO) coating layers were utilized separately to effectively reduce surface defects, encapsulate PeNCs, and improve their stability issues. To fabricate the coated PeNCs with metal oxides, zinc acetate and nickel(II) acetate tetrahydrate solutions were prepared individually and added to the crude perovskite solutions. The quantum yield of Zn-doped CsPbBr3 (CsPb1-xZnxBr3) PeNCs coated with ZnO increased from 50% for bare CsPbBr3 to over 84%, while NiO-coated PeNCs exhibited a higher yield of 90% both of which remarkably enhanced the emission stability. Moreover, NiO coatings represented a proper protection against surface imperfections and improved resistance to external stimuli. The combination of facile/effective preparation method, excellent emission efficiency, and reliable emission stability nominates the prepared colloidal composite for display pixels, detectors, and lasers.Article Citation - WoS: 13Citation - Scopus: 13Tuning the Shades of Red Emission in InP/ZnSe Nanocrystals With Narrow Full Width for Fabrication of Light-Emitting Diodes(Amer Chemical Soc, 2023-10-13) Soheyli, Ehsan; Bicer, Aysenur; Ozel, Sultan Suleyman; Tiras, Kevser Sahin; Mutlugun, Evren; Sahin Tiras, KevserWhile Cd-based luminescent nanocrystals (NCs) are the most mature NCs for fabricating efficient red light-emitting diodes (LEDs), their toxicity related limitation is inevitable, making it necessary to find a promising alternative. From this point of view, multishell-coated, red-emissive InP-based NCs are excellent luminescent nanomaterials for use as an emissive layer in electroluminescent (EL) devices. However, due to the presence of oxidation states, they suffer from a wide emission spectrum, which limits their performance. This study uses tris-(dimethyl-amino)-phosphine (3DMA-P) as a low-cost aminophosphine precursor and a double HF treatment to suggest an upscaled, cost-effective, and one-pot hot-injection synthesis of purely red-emissive InP-based NCs. The InP core structures were coated with thick layers of ZnSe and ZnS shells to prevent charge delocalization and to create a narrow size distribution. The purified NCs showed an intense emission signal as narrow as 43 nm across the entire red wavelength range (626-670 nm) with an emission quantum efficiency of 74% at 632 nm. The purified samples also showed an emission quantum efficiency of 60% for far-red wavelengths of 670 nm with a narrow full width of 50 nm. The samples showed a relatively long average emission lifetime of 50-70 ns with a biexponential decay profile. To demonstrate the practical ability of the prepared NCs in optoelectronics, we fabricated a red-emissive InP-based LEDs. The best-performing device showed an external quantum efficiency (EQE) of 1.16%, a luminance of 1039 cd m(-2), and a current efficiency of 0.88 cd A(-1).Article Citation - WoS: 4Citation - Scopus: 4Transparent Films Made of Highly Scattering Particles(Amer Chemical Soc, 2020-01-13) Erdem, Talha; Yang, Lan; Xu, Peicheng; Altintas, Yemliha; O'Neil, Thomas; Caciagli, Alessio; Eiser, ErikaToday, colloids are widely employed in various products from creams and coatings to electronics. The ability to control their chemical, optical, or electronic features by controlling their size and shape explains why these materials are so widely preferred. Nevertheless, altering some of these properties may also lead to some undesired side effects, one of which is an increase in optical scattering upon concentration. Here, we address this strong scattering issue in films made of binary colloidal suspensions. In particular, we focus on raspberry-type polymeric particles made of a spherical polystyrene core decorated by small hemispherical domains of acrylate with an overall positive charge, which display an unusual stability against aggregation in aqueous solutions. Their solid films display a brilliant red color due to Bragg scattering but appear completely white on account of strong scattering otherwise. To suppress the scattering and induce transparency, we prepared films by hybridizing them with oppositely charged PS particles with a size similar to that of the bumps on the raspberries. We report that the smaller PS particles prevent raspberry particle aggregation in solid films and suppress scattering by decreasing the spatial variation of the refractive index inside the film. We believe that the results presented here provide a simple strategy to suppress strong scattering of larger particles to be used in optical coatings.Article Citation - WoS: 6Citation - Scopus: 7Tailored Synthesis of Iron Oxide Nanocrystals for Formation of Cuboid Mesocrystals(Amer Chemical Soc, 2021-08-02) Soran-Erdem, Zeliha; Sharma, Vijay Kumar; Hernandez-Martinez, Pedro Ludwig; Demir, Hilmi VolkanIn this work, we systematically studied the shape- and size-controlled monodisperse synthesis of iron oxide nanocrystals (IONCs) for their use as building blocks in the formation of mesocrystals. For this aim, on understanding the influence of the oleic acid concentration, iron-oleate concentration, and heating rate on the synthesis of robust and reproducible IONCs with desired sizes and shapes, we synthesized highly monodisperse similar to 11 nm sized nanocubes and nanospheres. Magnetic measurements of both cubic and spherical IONCs revealed the presence of mixed paramagnetic and superparamagnetic phases in these nanocrystals. Moreover, we observed that the magnetic moments of the nanocubes are more substantial compared to their spherical counterparts. We then demonstrated a simple magnetic-field-assisted assembly of nanocubes into three-dimensional (3D) cuboid mesocrystals while nanospheres did not form any mesocrystals. These findings indicate that small cubic nanocrystals hold great promise as potential building blocks of 3D magnetic hierarchical structures with their superior magnetic properties and mesocrystal assembly capability, which may have high relevance in various fields ranging from high-density data storage to biomedical applications.Article Citation - WoS: 14Citation - Scopus: 13Spectrally Tunable White Light-Emitting Diodes Based on Carbon Quantum Dot-Doped Poly(N-Vinylcarbazole) Composites(Amer Chemical Soc, 2024-01-26) Sahin Tiras, Kevser; Bicer, Aysenur; Soheyli, Ehsan; Mutlugun, EvrenElectroluminescent white light-emitting diodes (WLEDs) are always of great interest for emerging display applications. Carbon-based quantum dots (CQDs) are the newest emerging nanoscale materials that can be employed for this purpose, owing to their broad and bright light emission properties. In the present work, highly luminescent CQDs with an emission quantum yield of 60% were prepared via a colloidal solvothermal method and subsequent silica gel column chromatography. The photoluminescence (PL) peak was located at 550 nm possessing yellow emission, with a full width at half-maximum of 98 nm and a relatively long lifetime of 10.23 ns through a single-exponential recombination pathway. CQDs were employed in an electroluminescent device architecture of an ITO/PEDOT:PSS/TFB/CQD:PVK/TPBi/LiF/Al structure and blended with poly(N-vinylcarbazole) (PVK) to evaluate their ability to reach white electroluminescent emission. Results confirmed a high external quantum efficiency (EQE) of 0.76% and a maximum luminescence of 774.3 cd<middle dot>m(-2). Tuning the ratio between CQDs and PVK from 1:10.25 to 1:5.75 resulted in a systematic shift in CIE x-y coordinates from 0.23-0.26 to 0.21-0.24, located close to the cool white region. The results of the present study can be considered a step forward in fabricating efficient WLEDs based on low-cost CQDs.Article Citation - WoS: 16Citation - Scopus: 17Solid-State Encapsulation and Color Tuning in Films of Cesium Lead Halide Perovskite Nanocrystals for White Light Generation(Amer Chemical Soc, 2019-01-30) Torun, Ilker; Altintas, Yemliha; Yazici, Ahmet Faruk; Mutlugun, Evren; Onses, M. SerdarPerovskite nanocrystals (PNCs) are highly demanding nanomaterials for solid-state lighting applications. A challenge for their exploitation in practical applications is the insufficient ambient and water stability associated with their ionic nature. Here we report a novel route for solid-state encapsulation of films of perovskite nanocrystals (PNCs) through vapor-phase deposition of a thin and hydrophobic layer of fluoroalkyltrichlorosilanes (FAS). High quality nanoscale crystals of CsPbBr3 were synthesized with well established colloidal methods and coated on solid substrates. The films of PNCs were then subjected to vapor of FAS for short durations of time (<60 s) in ambient atmosphere, resulting in deposition of a thin (<20 nm) hydrophobic layer. Besides providing a barrier for water and humidity, the vapor-phase deposition of FAS was accompanied by the blue shift of the emission wavelength of the PNCs. The color shift results from the partial exchange of Br with Cl anions, which emerge during the self-hydrolysis of the silane molecules. Throughout this process, we demonstrate the enhanced water stability of the films of PNCs and fine tunability of the wavelength in films from 516 nm to 488 nm. The fabrication of a white-light-emitting diode and tunability of the color coordinates with the duration of the FAS deposition were demonstrated. The rapid, scalable, and inexpensive solid-state encapsulation approach shows great promise for films of halide perovskites.Article Citation - WoS: 27Citation - Scopus: 29Revisiting the Role of Charge Transfer in the Emission Properties of Carborane-Fluorophore Systems: A TDDFT Investigation(Amer Chemical Soc, 2022-06-05) Tahaoglu, Duygu; Usta, Hakan; Alkan, FahriIn this study, we performed a detailed investigation of the S-1 potential energy surface (PES) of o-carborane-anthracene (o-CB-Ant) with respect to the C-C bond length on o-CB and the dihedral angle between o-CB and Ant moieties. The effects of different substituents (F, Cl, CN, and OH) on carbon- or boron-substituted o-CB, along with a pi-extended acene-based fluorophore, pentacene, on the nature and energetics of S-1 -> S-0 transitions are evaluated. Our results show the presence of a non-emissive S-1 state with an almost pure charge transfer (CT) character for all systems as a result of significant C-C bond elongation (C-C = 2.50-2.56 angstrom) on o-CB. In the case of unsubstituted o-CB-Ant, the adiabatic energy of this CT state corresponds to the global minimum on the S-1 PES, which suggests that the CT state could be involved in emission quenching. Despite large deformations on the o-CB geometry, predicted energy barriers are quite reasonable (0.3-0.4 eV), and the C-C bond elongation can even occur without a noticeable energy penalty for certain conformations. With substitution, it is shown that the dark CT state becomes even more energetically favorable when the substituent shows -M effects (e.g., -CN), whereas substituents showing +M effects (e.g., -OH) can result in an energy increase for the CT state, especially for partially stretched C-C bond lengths. It is also shown that the relative energy of the CT state on the PES depends strongly on the LUMO level of the fluorophore as this state is found to be energetically less favorable compared to other conformations when anthracene is replaced with pi-extended pentacene. To our knowledge, this study shows a unique example of a detailed theoretical analysis on the PES of the S-1 state in o-CB-fluorophore systems with respect to substituents or fluorophore energy levels. Our findings could guide future experimental work in emissive o-CB-fluorophore systems and their sensing/optoelectronic applications.Article Citation - WoS: 18Citation - Scopus: 21Poly(Lauryl Methacrylate)-Grafted Amino-Functionalized Zirconium-Terephthalate Metal-Organic Framework: Efficient Adsorbent for Extraction of Polycyclic Aromatic Hydrocarbons from Water Samples(Amer Chemical Soc, 2020-05-20) Tabatabaii, Maryam; Khajeh, Mostafa; Oveisi, Ali Reza; Erkartal, Mustafa; Sen, UnalIn this study, a novel porous hybrid material, poly(lauryl methacrylate) polymer-grafted UiO-66-NH2 (UiO = University of Oslo), was synthesized for efficient extraction of polycyclic aromatic hydrocarbons (PAHs) from aqueous samples. The polymer end-tethered covalently to the MOF's surface was synthesized by surface-initiated atom transfer radical polymerization, revealing a distinct type of morphology. The adsorbent was characterized by scanning electron microscopy, energy-dispersive spectroscopy, transmission electron microscopy, powder X-ray diffraction, N-2 adsorption-desorption analysis, Fourier transform infrared spectroscopy, and thermogravimetric analysis. The analyses were carried out by gas chromatography-mass spectrometry. Parameters including the type and volume of the eluent, the amount of the adsorbent, and adsorption and desorption times were investigated and optimized. Under optimal conditions, the limit of detection, intraday precision, and interday precision were in the range of 3-8 ng L-1, 1.4-3.1, and 4.1-6.5%, respectively. The procedure was used for analysis of PAHs from natural water samples.Article Citation - WoS: 9Citation - Scopus: 11Natural Wax-Stabilized Perovskite Nanocrystals as Pen-On Inks and Doughs(Amer Chemical Soc, 2022-04-19) Ocal, Sema Karabel; Kiremitler, N. Burak; Yazici, Ahmet Faruk; Celik, Nusret; Mutlugun, Evren; Onses, M. Serdar; Karabel Ocal, SemaPerovskite nanocrystals (PNCs) are emerging luminescent materials for a wide range of technological applications. The broad adaptation of PNCs will be greatly improved by addressing their intrinsically low stability and developing processes for their assembly into 2D and 3D structures using facile approaches. Inspired by the mechanism of natural protection of leaves, this paper proposes natural carnauba wax (CW) as an encapsulation material for PNCs. The synthesis of PNCs is performed in the presence of CW, which is derived from the leaves of Copernicia prunifera palm. CW acts as a solvent and replaces the commonly used octadecene in the preparation of PNCs. The facile synthesis in CW results in PNCs with greatly improved thermal, water, and air stability. Furthermore, the thermal and mechanical properties make PNC-Wax a highly suitable solid ink for versatile processing of these materials into 2D and 3D architectures. PNC-Wax can be printed via a pen-on-paper approach by heating at modest temperatures. The rapid plasticization of PNC-Wax by mechanical agitation enables hand-shaping of the material in a manner similar to playdoughs, which would possibly enable the versatile use of this material for various applications.Article Citation - WoS: 12Citation - Scopus: 14Nanowire-Shaped MoS2@MoO3 Nanocomposites as a Hole Injection Layer for Quantum Dot Light-Emitting Diodes(Amer Chemical Soc, 2022-08-01) Bastami, Nasim; Soheyli, Ehsan; Arslan, Aysenur; Sahraei, Reza; Yazici, Ahmet Faruk; Mutlugun, EvrenMolybdenum disulfides and molybdenum trioxides are structures that possess the potential to work as efficient charge transport layers in optoelectronic devices. In the present study, as opposed to the existing Mo-based nanostructures in flake, sheet, or spherical forms, an extremely simple and low-cost hydrothermal method is used to prepare nanowires (NWs) of MoS2@MoO3 (MSO) composites. The synthesis method includes several advantages including easy handling and processing of inexpensive precursors to reach stable MSO NWs without the need for an oxygen-free medium, which would facilitate the possibility of mass production of these nanostructures. The structural analysis confirmed the formation of MSO nanocomposites with different Mo valence states, as well as NWs of average length and diameter of 70 nm and 5 nm, respectively. In order to demonstrate their potential for optoelectronic applications, MSO NWs were blended into hole injection layers (HILs) in quantum dot-based light emitting diodes (QLEDs). Electroluminescence measurements show a substantial enhancement in both luminance (from 44,330 to 68,630 cd.m-2) and external quantum efficiency (from 1.6 to 2.3%), based on the increase in the ratio of MSO NWs from 3 to 10%. Interestingly, the addition of 10% volume of MSO NWs resulted in a remarkably smoother HIL with improved current efficiency and stability in green-emitting QLEDs. The simplicity and cost-effective features of the synthesis method along with outstanding favorable morphology demonstrated their ability to enhance the QLED performance and mark them as promising agents for optoelectronics.