Scopus İndeksli Yayınlar Koleksiyonu
Permanent URI for this collectionhttps://hdl.handle.net/20.500.12573/395
Browse
35 results
Search Results
Article Citation - WoS: 2Citation - Scopus: 1Fully Inorganic Colloidal CsPbBr3 Perovskite Nanocrystals with Zn-Doping and Metal Oxide Encapsulation for Luminescent Display Panels(Amer Chemical Soc, 2025-11-07) Khorasani, Azam; Soheyli, Ehsan; Mutlugun, EvrenPerovskite nanocrystals (PeNCs) are emerging as exceptional materials due to their high photoluminescence quantum yield, tunable bandgap, and excellent charge carrier mobility, enabling a wide range of colors and promising applications in optoelectronics and photovoltaics. Despite their advantages, PeNCs face stability challenges caused by environmental factors. In the presented study, a facile and versatile colloidal hot-injection method was used to apply the beneficial aspects of Zn-doping in cesium lead bromide (CsPbBr3) PeNCs. The uniform platelet-shaped Zn-doped CsPbBr3 PeNCs were prepared by doping with a 0.1 molar ratio of zinc-oleate solution in the perovskite precursors during synthesis. Then, zinc-oxide (ZnO) and nickel-oxide (NiO) coating layers were utilized separately to effectively reduce surface defects, encapsulate PeNCs, and improve their stability issues. To fabricate the coated PeNCs with metal oxides, zinc acetate and nickel(II) acetate tetrahydrate solutions were prepared individually and added to the crude perovskite solutions. The quantum yield of Zn-doped CsPbBr3 (CsPb1-xZnxBr3) PeNCs coated with ZnO increased from 50% for bare CsPbBr3 to over 84%, while NiO-coated PeNCs exhibited a higher yield of 90% both of which remarkably enhanced the emission stability. Moreover, NiO coatings represented a proper protection against surface imperfections and improved resistance to external stimuli. The combination of facile/effective preparation method, excellent emission efficiency, and reliable emission stability nominates the prepared colloidal composite for display pixels, detectors, and lasers.Article Citation - WoS: 18Citation - Scopus: 18Ultrahigh Vacuum Self-Assembly of Rotationally Commensurate C8-BTBT/MoS2 Mixed-Dimensional Heterostructures(Amer Chemical Soc, 2019-02-12) Liu, Xiaolong; Balla, Itamar; Sangwan, Vinod K.; Usta, Hakan; Facchetti, Antonio; Marks, Tobin J.; Hersam, Mark C.Mixed-dimensional van der Waals heterostructures combine the advantages of nanomaterials with qualitatively distinct properties such as the extended bandstructures and high charge carrier mobilities of inorganic two-dimensional materials and the discrete orbital energy levels and strong optical absorption of zero-dimensional organic molecules. The synergistic interplay between nanomaterials of distinct dimensionality has enabled a variety of unique applications such as antiambipolar transistors, sensitized photodetectors, and gate-tunable photovoltaics. Because the performance of mixed-dimensional heterostructure devices depends sensitively on the buried interfacial structure, it is of great interest to identify materials and chemistries that naturally form highly ordered heterointerfaces. Toward this end, here we demonstrate ultrahigh vacuum self-assembly of 2,7-dioctyl[1]benzothieno [3,2-b][1]benzothiophene (C8-BTBT) monolayers onto epitaxial MoS2/graphene heterostructures. With molecular-resolution scanning tunneling microscopy and spectroscopy, the resulting C8-BTBT/MoS2/graphene mixed-dimensional heterostructures are found to be rotationally commensurate with well-defined physical and electronic structures. It is further shown that the self-assembled C8-BTBT monolayers are insensitive to the structural defects and electronic perturbations of the underlying MoS2 substrate, which provides significant processing latitude. For these reasons, this work will facilitate ongoing efforts to utilize organic/MoS2/graphene mixed-dimensional heterostructures for electronic, optoelectronic, and photovoltaic applications.Article Citation - WoS: 13Citation - Scopus: 13Tuning the Shades of Red Emission in InP/ZnSe Nanocrystals With Narrow Full Width for Fabrication of Light-Emitting Diodes(Amer Chemical Soc, 2023-10-13) Soheyli, Ehsan; Bicer, Aysenur; Ozel, Sultan Suleyman; Tiras, Kevser Sahin; Mutlugun, Evren; Sahin Tiras, KevserWhile Cd-based luminescent nanocrystals (NCs) are the most mature NCs for fabricating efficient red light-emitting diodes (LEDs), their toxicity related limitation is inevitable, making it necessary to find a promising alternative. From this point of view, multishell-coated, red-emissive InP-based NCs are excellent luminescent nanomaterials for use as an emissive layer in electroluminescent (EL) devices. However, due to the presence of oxidation states, they suffer from a wide emission spectrum, which limits their performance. This study uses tris-(dimethyl-amino)-phosphine (3DMA-P) as a low-cost aminophosphine precursor and a double HF treatment to suggest an upscaled, cost-effective, and one-pot hot-injection synthesis of purely red-emissive InP-based NCs. The InP core structures were coated with thick layers of ZnSe and ZnS shells to prevent charge delocalization and to create a narrow size distribution. The purified NCs showed an intense emission signal as narrow as 43 nm across the entire red wavelength range (626-670 nm) with an emission quantum efficiency of 74% at 632 nm. The purified samples also showed an emission quantum efficiency of 60% for far-red wavelengths of 670 nm with a narrow full width of 50 nm. The samples showed a relatively long average emission lifetime of 50-70 ns with a biexponential decay profile. To demonstrate the practical ability of the prepared NCs in optoelectronics, we fabricated a red-emissive InP-based LEDs. The best-performing device showed an external quantum efficiency (EQE) of 1.16%, a luminance of 1039 cd m(-2), and a current efficiency of 0.88 cd A(-1).Article Citation - WoS: 28Citation - Scopus: 29Three-Dimensional Au-Coated Electrosprayed Nanostructured BODIPY Films on Aluminum Foil as Surface-Enhanced Raman Scattering Platforms and Their Catalytic Applications(Amer Chemical Soc, 2017-05-16) Yilmaz, Mehmet; Erkartal, Mustafa; Ozdemir, Mehmet; Sen, Unal; Usta, Hakan; Demirel, GokhanThe design and development of three-dimensional (3D) nanostructures with high surface-enhanced Raman scattering (SERS) performances have attracted considerable attention in the fields of chemistry, biology, and materials science. Nevertheless, electrospraying of organic smalt molecules on low-cost flexible substrates has never been studied to realize large-scale SERS-active platforms. Here, we report the facile, efficient, and low-cost fabrication of-Stable and reproducible Au-coated electrosprayed organic semiconductor films (Au@BDY-4TEBDY) on flexible regular aluminum foil at a large scale (5 cm X 5 cm) for practical SERS and catalytic applications. To this end, a well-designed-acceptor-donor-atceptor-type solution-processable molecular semiconductor, BDY-4T-BDY, developed by our group, is used because of its advantageous structural and electrical properties. The morphology of the electrosprayed organic film changes by solution concentration, and two different 3D morphologies with out-of-plane features are obtained. Highly uniform dendritic nanoribbons with sharp needle-like tips and vertically oriented nanoplates (similar to 50 nm thickness) are achieved when electrospraying solution concentrations of 240 and 253% w/v.(mgimL) are, respectively, used. When these electrosprayed organic films are coated with a nanoscopic thin (30 nm) Au layer, the resulting Au@BDY-4T-BDY platforms demonstrate remarkable SERS enhancement factors up to 1.7 X 10(6) with excellent Raman signal reproducibility (relative standard deviation <= 0.13) for methylene blue over the entire film. Finally, Au@BDY-4T-BDY films showed good catalytic activity for the reduction of 4-nitrophenol to 4-aminophenol with rate constants of 1.3 X 10(-2) and 9.2 X 10(-3) min(-1). Our results suggest that electrospraying of rationally designed organic semiconductor molecules on flexible substrates holds great promise to enable low-cost, solution-processed, SERS-active platforms.Article Citation - WoS: 53Citation - Scopus: 59Thickness-Tunable Self-Assembled Colloidal Nanoplatelet Films Enable Ultrathin Optical Gain Media(Amer Chemical Soc, 2020-07-31) Erdem, Onur; Foroutan, Sina; Gheshlaghi, Negar; Guzelturk, Burak; Altintas, Yemliha; Demir, Hilmi VolkanWe propose and demonstrate construction of highly uniform, multilayered superstructures of CdSe/CdZnS core/shell colloidal nanoplatelets (NPLs) using liquid interface self-assembly. These NPLs are sequentially deposited onto a solid substrate into slabs having monolayer-precise thickness across tens of cm(2) areas. Because of near-unity surface coverage and excellent uniformity, amplified spontaneous emission (ASE) is observed from an uncharacteristically thin film having 6 NPL layers, corresponding to a mere 42 nm thickness. Furthermore, systematic studies on optical gain of these NPL superstructures having thicknesses ranging from 6 to 15 layers revealed the gradual reduction in gain threshold with increasing number of layers, along with a continuous spectral shift of the ASE peak (similar to 18 nm). These observations can be explained by the change in the optical mode confinement factor with the NPL waveguide thickness and propagation wavelength. This bottom-up construction technique for thickness-tunable, three-dimensional NPL superstructures can be used for large-area device fabrication.Article Citation - WoS: 6Citation - Scopus: 7Tailored Synthesis of Iron Oxide Nanocrystals for Formation of Cuboid Mesocrystals(Amer Chemical Soc, 2021-08-02) Soran-Erdem, Zeliha; Sharma, Vijay Kumar; Hernandez-Martinez, Pedro Ludwig; Demir, Hilmi VolkanIn this work, we systematically studied the shape- and size-controlled monodisperse synthesis of iron oxide nanocrystals (IONCs) for their use as building blocks in the formation of mesocrystals. For this aim, on understanding the influence of the oleic acid concentration, iron-oleate concentration, and heating rate on the synthesis of robust and reproducible IONCs with desired sizes and shapes, we synthesized highly monodisperse similar to 11 nm sized nanocubes and nanospheres. Magnetic measurements of both cubic and spherical IONCs revealed the presence of mixed paramagnetic and superparamagnetic phases in these nanocrystals. Moreover, we observed that the magnetic moments of the nanocubes are more substantial compared to their spherical counterparts. We then demonstrated a simple magnetic-field-assisted assembly of nanocubes into three-dimensional (3D) cuboid mesocrystals while nanospheres did not form any mesocrystals. These findings indicate that small cubic nanocrystals hold great promise as potential building blocks of 3D magnetic hierarchical structures with their superior magnetic properties and mesocrystal assembly capability, which may have high relevance in various fields ranging from high-density data storage to biomedical applications.Article Citation - WoS: 37Citation - Scopus: 39Spectrally Wide-Range Efficient, and Bright Colloidal Light-Emitting Diodes of Quasi-2D Nanoplatelets Enabled by Engineered Alloyed Heterostructures(Amer Chemical Soc, 2020-08-25) Altintas, Yemliha; Liu, Baiquan; Hernandez-Martinez, Pedro Ludwig; Gheshlaghi, Negar; Shabani, Farzan; Sharma, Manoj; Demir, Hilmi VolkanRecently, there has been tremendous interest in the synthesis and optoelectronic applications of quasi-two-dimensional colloidal nanoplatelets (NPLs). Thanks to the ultranarrow emission linewidth, high-extinction coefficient, and high photostability, NPLs offer an exciting opportunity for high-performance optoelectronics. However, until now, the applications of these NPLs are limited to available discrete emission ranges, limiting the full potential of these exotic materials as efficient light emitters. Here, we introduce a detailed systematic study on the synthesis of NPLs based on the alloying mechanisms in core/shell, core/alloyed shell, alloyed core/shell, and alloyed core/alloyed shell heterostructures. Through the engineering of the band gap supported by the theoretical calculations, we carefully designed and successfully synthesized the NPL emitters with continuously tunable emission. Unlike conventional NPLs showing discrete emission, here, we present highly efficient core/shell NPLs with fine spectral tunability from green to deep-red spectra. As an important demonstration of these efficient emitters, the first-time implementation of yellow NPL light-emitting diodes (LEDs) has been reported with record device performance, including the current efficiency surpassing 18.2 cd A(-1), power efficiency reaching 14.8 lm W-1, and record luminance exceeding 46 900 cd m(-2). This fine and wide-range color tunability in the visible range from stable and efficient core/shell NPLs is expected to be extremely important for the optoelectronic applications of the family of colloidal NPL emitters.Article Citation - WoS: 14Citation - Scopus: 13Spectrally Tunable White Light-Emitting Diodes Based on Carbon Quantum Dot-Doped Poly(N-Vinylcarbazole) Composites(Amer Chemical Soc, 2024-01-26) Sahin Tiras, Kevser; Bicer, Aysenur; Soheyli, Ehsan; Mutlugun, EvrenElectroluminescent white light-emitting diodes (WLEDs) are always of great interest for emerging display applications. Carbon-based quantum dots (CQDs) are the newest emerging nanoscale materials that can be employed for this purpose, owing to their broad and bright light emission properties. In the present work, highly luminescent CQDs with an emission quantum yield of 60% were prepared via a colloidal solvothermal method and subsequent silica gel column chromatography. The photoluminescence (PL) peak was located at 550 nm possessing yellow emission, with a full width at half-maximum of 98 nm and a relatively long lifetime of 10.23 ns through a single-exponential recombination pathway. CQDs were employed in an electroluminescent device architecture of an ITO/PEDOT:PSS/TFB/CQD:PVK/TPBi/LiF/Al structure and blended with poly(N-vinylcarbazole) (PVK) to evaluate their ability to reach white electroluminescent emission. Results confirmed a high external quantum efficiency (EQE) of 0.76% and a maximum luminescence of 774.3 cd<middle dot>m(-2). Tuning the ratio between CQDs and PVK from 1:10.25 to 1:5.75 resulted in a systematic shift in CIE x-y coordinates from 0.23-0.26 to 0.21-0.24, located close to the cool white region. The results of the present study can be considered a step forward in fabricating efficient WLEDs based on low-cost CQDs.Article Citation - WoS: 61Citation - Scopus: 74Solution-Processable Bodipy-Based Small Molecules for Semiconducting Microfibers in Organic Thin-Film Transistors(Amer Chemical Soc, 2016-05-23) Ozdemir, Mehmet; Choi, Donghee; Kwon, Guhyun; Zorlu, Yunus; Cosut, Bunyemin; Kim, Hyekyoung; Usta, HakanElectron-deficient pi-conjugated small molecules can function as electron-transporting semiconductors in various optoelectronic applications. Despite their unique structural, optical, and electronic properties, the development of BODIPY-based organic semiconductors has lagged behind that of other pi-deficient units. Here, we report the design and synthesis of two novel solution-proccessable BODIPY-based small molecules (BDY-3T-BDY and BDY-4T-BDY) for organic thin-film transistors (OTFTs). The new semiconductors were fully characterized by H-1/C-13 NMR, mass spectrometry, cyclic voltammetry, UV-vis spectroscopy, photoluminescence, differential scanning calorimetry, and thermogravimetric analysis. The single-crystal X-ray diffraction (XRD) characterization of a key intermediate reveals crucial structural properties. Solution-sheared top-contact/bottom-gate OTFTs exhibited electron mobilities up to 0.01 cm(2)/V center dot s and current on/off ratios of >10(8). Film microstructural and morphological characterizations indicate the formation of relatively long (similar to 0.1 mm) and micrometer-sized (1-2 mu m) crystalline fibers for BDY-4T-BDY-based films along the shearing direction. Fiber-alignment-induced charge-transport anisotropy (mu?/mu approximate to 10) was observed, and higher mobilities were achieved when the microfibers were aligned along the conduction channel, which allows for efficient long-range charge-transport between source and drain electrodes. These OTFT performances are the highest reported to date for a BODIPY-based molecular semiconductor, and demonstrate that BODIPY is a promising building block for enabling solution-processed, electron-transporting semiconductor films.Article Citation - WoS: 11Citation - Scopus: 13Solution-Processable Indenofluorenes on Polymer Brush Interlayer: Remarkable N-Channel Field-Effect Transistor Characteristics Under Ambient Conditions(Amer Chemical Soc, 2023-08-15) Can, Ayse; Deneme, Ibrahim; Demirel, Gokhan; Usta, HakanThe development of solution-processable n-type molecularsemiconductorsthat exhibit high electron mobility (& mu;(e) & GE;0.5 cm(2)/(V & BULL;s)) under ambient conditions, along withhigh current modulation (I (on)/I (off) & GE; 10(6)-10(7)) andnear-zero turn on voltage (V (on)) characteristics,has lagged behind that of other semiconductors in organic field-effecttransistors (OFETs). Here, we report the design, synthesis, physicochemicaland optoelectronic characterizations, and OFET performances of a libraryof solution-processable, low-LUMO (-4.20 eV) 2,2 & PRIME;-(2,8-bis(3-alkylthiophen-2-yl)indeno[1,2-b]fluorene-6,12-diylidene)dimalononitrile small molecules, & beta;,& beta;& PRIME;-C (n) -TIFDMTs, having varied alkyl chain lengths (n = 8, 12, 16). An intriguing correlation is identifiedbetween the solid-isotropic liquid transition enthalpies andthe solubilities, indicating that cohesive energetics, which are tunedby alkyl chains, play a pivotal role in determining solubility. Thesemiconductors were spin-coated under ambient conditions on denselypacked (grafting densities of 0.19-0.45 chains/nm(2)) ultrathin (& SIM;3.6-6.6 nm) polystyrene-brush surfaces.It is demonstrated that, on this polymer interlayer, thermally induceddispersive interactions occurring over a large number of methyleneunits between flexible alkyl chains (i.e., zipper effect) are criticalto achieve a favorable thin-film crystallization with a proper microstructureand morphology for efficient charge transport. While C-8 and C-16 chains show a minimal zipper effect upon thermalannealing, C-12 chains undergo an extended interdigitationinvolving & SIM;6 methylene units. This results in the formationof large crystallites having lamellar stacking ((100) coherence length & SIM;30 nm) in the out-of-plane direction and highly favorablein-plane & pi;-interactions in a slipped-stacked arrangement. Uninterruptedmicrostructural integrity (i.e., no face-on (010)-oriented crystallites)was found to be critical to achieving high mobilities. The excellentcrystallinity of the C-12-substituted semiconductor thinfilm was also evident in the observed crystal lattice vibrations (phonons)at 58 cm(-1) in low-frequency Raman scattering. Two-dimensionalmicrometer-sized (& SIM;1-3 & mu;m), sharp-edged plate-likegrains lying parallel with the substrate plane were observed. OFETsfabricated by the current small molecules showed excellent n-channelbehavior in ambient with & mu;(e) values reaching & SIM;0.9cm(2)/(V & BULL;s), I (on)/I (off) & SIM; 10(7)-10(8), and V (on) & AP; 0 V. Our study notonly demonstrates one of the highest performing n-channel OFET devicesreported under ambient conditions via solution processing but alsoelucidates significant relationships among chemical structures, molecularproperties, self-assembly from solution into a thin film, and semiconductingthin-film properties. The design rationales presented herein may openup new avenues for the development of high-electron-mobility novelelectron-deficient indenofluorene and short-axis substituted donor-acceptor & pi;-architectures via alkyl chain engineering and interface engineering.