Scopus İndeksli Yayınlar Koleksiyonu
Permanent URI for this collectionhttps://hdl.handle.net/20.500.12573/395
Browse
3 results
Search Results
Conference Object Citation - Scopus: 9Production of Concrete Compatible Biogranules for Self-Healing Concrete Applications(EDP Sciences, 2019) Sonmez, Merve; Erşan, Yusuf ÇaǧatayRecently, cost-efficient nitrate reducing biogranules were suggested as an alternative to axenic microbial cultures for development of microbial self-healing concrete. In a marine environment, biogranule containing microbial self-healing concrete showed simultaneous self-healing of cracks and immunisation against rebar corrosion. Yet, information about the production strategy of these biogranules and their compatibility with a mortar matrix is limited. This study presents the production of biogranules and their compatibility with mortar specimens when incorporated at dosages between 0.36% to 4.30% w/w cement (0.25% to 3% of bacteria w/w cement). In-house produced biogranules composed of 70% bacteria and 30% of minerals w/w of biogranule were used for the compatibility tests. In test mortars, calcium formate (CF) and calcium nitrate (CN) were used as regular nutrient admixtures, and nutrient content was set identical in every batch. Up to 2.9% incorporation, biogranules had no significant influence on the fresh properties of mortar. More than 2.9% incorporation caused poor workability and a 26% decrease in 3-Day compressive strength of biomortar specimens. Overall, the biogranules produced are compatible with a cementitious matrix up to 2.9% w/w cement, and even up to 3.6% if early age strength is not essential, which makes biogranules one of the most compatible microbial healing agents among the suggested agents in the literature. © 2021 Elsevier B.V., All rights reserved.Conference Object Citation - Scopus: 1On the Variation in Several Rock Properties due to Magnesium Sulfate Weathering Tests ‒ A Case Study for Limestones(International Multidisciplinary Scientific Geoconference, 2019-06-20) Köken, E.Contributions to the behavior of rock materials under various conditions provide a practical knowledge about issues relating the performance and long-term serviceability of rocks. In this study, various limestones with varying textural features were investigated in terms of their resistance against magnesium sulfate weathering tests. For this purpose, initial physico-mechanical properties of limestones were determined. Then, rock materials were subjected to magnesium sulfate weathering tests (up to 20 cycles) and the variation in physico-mechanical properties were determined for each rock type. As a result of laboratory tests, compared to initial rock properties, effective porosity (ne, %) increased in the range of 3% ‒ 14% and 12% ‒ 35% after 10th and 20th magnesium sulfate weathering cycles, respectively. Uniaxial compressive strength of rocks (UCS, MPa) decreased by 9% ‒ 24% after 10th cycles and by 32% – 58% after 20th cycles. Brazilian tensile strength of rocks (BTS, MPa) decreased in the range of 7% ‒ 19% and 20% ‒ 49% after 10th and 20th cycles, respectively. Similar to the variations in UCS and BTS, Tangential Young Modulus (Eti, GPa) also decreased at a rate of 13% ‒ 28% and 23% ‒ 64% after 10th and 20th cycles, respectively. However, the values of Tangential Poisson’s Ratio (vti) fluctuated with progressive accelerated weathering cycles, which could be linked to varying axial and lateral strain rates at 50% of UCS values for the limestones investigated. Furthermore, the variation in crack initiation stress σCI (MPa) due to progressive magnesium sulfate tests were also evaluated considering two strain-based methods and the findings showed that σCI of limestones slowly decreased with increasing weathering test cycles. It could be claimed that cyclic magnesium sulfate tests performed on rock materials would be beneficial for assessing the long-term serviceability of rocks. In this context, mud-supported limestones seem to have a greater resistance against magnesium sulfate weathering tests compared to the grain-supported ones. However, the number of samples should be increased in order to achieve a comprehensive understanding about the degradation processes of limestones. © 2021 Elsevier B.V., All rights reserved.Article Citation - WoS: 52Citation - Scopus: 54Characteristics of Calcined Natural Zeolites for Use in High-Performance Pozzolan Blended Cements(Elsevier Sci Ltd, 2014-12) Kucukyildirim, E.; Uzal, B.Two natural zeolites with different characteristics were calcined at various temperatures in order to improve the benefits provided by their use in blended cements as cement replacement material. Natural zeolites were firstly characterized for their crystallinity by X-ray diffraction analysis, specific surface area by nitrogen absorption, and pozzolanic activity by electrical conductivity method, before and after the calcination. In order to assess the performance of calcined natural zeolite as cement replacement material, blended Portland cement pastes and mortars with raw and calcined zeolites were tested for their water requirement, free lime content, pore size distribution and compressive strength. The experimental results indicated that calcined zeolites are more desirable with lower water requirement and higher strength performance as cement replacement material than the raw zeolites. Blended cement with calcined natural zeolite showed higher compressive strength performance, when compared to that with the raw zeolite due to decreased porosity and refined pore structure of the hardened cementitious system. (C) 2014 Elsevier Ltd. All rights reserved.