Scopus İndeksli Yayınlar Koleksiyonu
Permanent URI for this collectionhttps://hdl.handle.net/20.500.12573/395
Browse
6 results
Search Results
Book Part Citation - WoS: 1Citation - Scopus: 4Understanding Communication via Diffusion: Simulation Design and Intricacies(Springer International Publishing AG, 2017) Acar, Bilal; Akkaya, Ali; Genc, Gaye; Yilmaz, H. Birkan; Kuran, M. Sukru; Tugcu, Tuna; Şükrü Kuran, M.Understanding Communication via Diffusion (CvD) is key to molecular communications research since it dominates the movement at the nano-scale. The researcher needs to properly understand the random diffusion of the molecules for the analysis of a molecular communication system. This chapter aims explaining the dynamics of diffusion from a communication engineer's perspective as well as providing useful hints for an effective simulation design by discussing some key intricacies. The chapter starts with a brief survey of simulators for molecular communications, followed by the basics of the simulation of Brownian motion and CvD. Several intricacies are addressed to help the researcher in simulation design, such as the number of replications required in terms of movement and bit sequence. We utilize this information further by discussing the design of more complex CvD systems such as tunnel-based approach that utilizes destroyer molecules and distributed simulator design based on HLA. Introduction of more complex CvD systems provides significant improvements in data rate and communications in general, bridging the gap between human-scale and nano-scale systems and enabling nanonetworking as a viable technology.Article Citation - WoS: 5Citation - Scopus: 5Rings With Modules Having a Restricted Injectivity Domain(Springer International Publishing AG, 2019-09-30) Demirci, Yilmaz Mehmet; Turkmen, Burcu Nisanci; Turkmen, Ergul; Nişancı Türkmen, BurcuWe introduce modules whose injectivity domains are contained in the class of modules with zero radical and call them working-class. This notion gives a generalization of poor modules that have minimal injectivity domain. Semisimple working-class modules always exist for arbitrary rings whereas their predecessors do not. We investigate the rings over which every module is either injective or working-class. Right weakly V-rings are examples of these rings. Moreover, we study the existence of working-class simple modules and show that if there is a projective working-class simple right module, then the ring is a right GV-ring.Conference Object Normal Mixture Model-Based Clustering of Data Using Genetic Algorithm(Springer International Publishing AG, 2020) Gogebakan, Maruf; Erol, HamzaIn this study, a new algorithm was developed for clustering multivariate big data. Normal mixture distributions are used to determine the partitions of variables. Normal mixture models obtained from the partitions of variables are generated using Genetic Algorithms (GA). Each partition in the variables corresponds to a clustering center in the normal mixture model. The best model that fits the data structure from normal mixture models is obtained by using the information criteria obtained from normal mixture distributions.Conference Object Citation - WoS: 13Citation - Scopus: 13Leaching of Turkish Oxidized Pb-Zn Flotation Tailings by Inorganic and Organic Acids(Springer International Publishing AG, 2020) Kaya, Muammer; Kursunoglu, Sait; Hussaini, Shokrullah; Gul, ErkanAn eco-friendly approach and simultaneous recovery of metals from mine tailings is still a significant challenge. This study investigates the extraction of zinc metal from the Kayseri region oxidized lead-zinc (Pb-Zn) flotation tailings by leaching using three different inorganic acids (HNO3, HCl, and H2SO4) and six different organic acids (citric (CA), oxalic (OA), formic (FA), ascorbic (AA), malic (MA), and tartaric (TA) acids). The effects of acid type and concentration, leaching temperature and time, and solid/liquid (S/L) ratio were studied for maximum Zn dissolution and minimum Pb, Fe, and As co-dissolution at lowest temperature and leaching time. For inorganic acids at 1/10 S/L ratio, 1.0MH(2)SO(4) and HCl concentrations achieved 92% Zn + 0% Pb + 12% Fe at 40 degrees C leaching temperature and 60 min leaching time and 92% Zn + 10% Pb + 0% Fe at 80 degrees C leaching temperature and 30 min leaching time, respectively. For organic acids, at 1/10 S/L ratio and 1.0M concentration, 92% Zn + 8.3% Pb with malic acid at 80 degrees C leaching temperature and 180 min leaching time and 91% Zn + 12% Pb with citric acid at 60 degrees C leaching temperature and 180 min leaching time were achieved. 1.0 M formic acid dissolved about 83% Zn + 2.8% Pb at 80 degrees C and 180 min leaching time. More than 90% Zn dissolution can be succeeded by using either inorganic acids at 40 degrees C for 30-60 min leaching time or organic acids at 60-80 degrees C for 180 min leaching time. Oxalic acid significantly dissolved Fe and As without Zn and Pb dissolution.Article Citation - WoS: 15Citation - Scopus: 15Comparison of SPT and VS-Based Liquefaction Analyses: A Case Study in Ercis (Van, Turkey)(Springer International Publishing AG, 2017-12-08) Akkaya, Ismail; Ozvan, Ali; Akin, Mutluhan; Akin, Muge K.; Ovun, UgurLiquefaction which is one of the most destructive ground deformations occurs during an earthquake in saturated or partially saturated silty and sandy soils, which may cause serious damages such as settlement and tilting of structures due to shear strength loss of soils. Standard (SPT) and cone (CPT) penetration tests as well as the shear wave velocity (V-s)-based methods are commonly used for the determination of liquefaction potential. In this research, it was aimed to compare the SPT and V-s-based liquefaction analysis methods by generating different earthquake scenarios. Accordingly, the Ercis residential area, which was mostly affected by the 2011 Van earthquake (M-w = 7.1), was chosen as the model site. Ercis (Van, Turkey) and its surroundings settle on an alluvial plain which consists of silty and sandy layers with shallow groundwater level. Moreover, Caldiran, Ercis-Kocapinar and Van Fault Zones are the major seismic sources of the region which have a significant potential of producing large magnitude earthquakes. After liquefaction assessments, the liquefaction potential in the western part of the region and in the coastal regions nearby the Lake Van is found to be higher than the other locations. Thus, it can be stated that the soil tightness and groundwater level dominantly control the liquefaction potential. In addition, the lateral spreading and sand boiling spots observed after the 23rd October 2011 Van earthquake overlap the scenario boundaries predicted in this study. Eventually, the use of V-s-based liquefaction analysis in collaboration with the SPT results is quite advantageous to assess the rate of liquefaction in a specific area.Article Citation - WoS: 24Citation - Scopus: 27A Numerical Investigation of the GRLW Equation Using Lumped Galerkin Approach With Cubic B-Spline(Springer International Publishing AG, 2016-02-27) Zeybek, Halil; Karakoc, S. Battal GaziIn this work, we construct the lumped Galerkin approach based on cubic B-splines to obtain the numerical solution of the generalized regularized long wave equation. Applying the von Neumann approximation, it is shown that the linearized algorithm is unconditionally stable. The presented method is implemented to three test problems including single solitary wave, interaction of two solitary waves and development of an undular bore. To prove the performance of the numerical scheme, the error norms L-2 and L-infinity and the conservative quantities I-1, I-2 and I-3 are computed and the computational data are compared with the earlier works. In addition, the motion of solitary waves is described at different time levels.