Scopus İndeksli Yayınlar Koleksiyonu
Permanent URI for this collectionhttps://hdl.handle.net/20.500.12573/395
Browse
2 results
Search Results
Book Part Citation - Scopus: 2Properties of Alkali-Activated Lightweight Concrete(Elsevier, 2022) Top, S.; Altiner, Mahmut; Vapur, HüseyinThis chapter presents a brief overview of the properties of alkali-activated lightweight concrete. Nowadays, the production of lightweight concrete has great attentions due to its extraordinary advantages such as reduced mass, improved sound and thermal insulation properties. Furthermore, the low gas emissions and the utilization of waste materials increase the importance of alkali-activated lightweight concrete. In this chapter, the strengths of lightweight concrete were examined by considering the aggregate type and density, the alkali activator type and concentration, the type of fiber reinforcements and foaming agents, which are the factors that have the most impact on the strengths. Thermal conductivity, fire resistance, acoustic performance, and durability properties have been explained considering the key points in the literature. In addition to porosity, it has been determined that one of the most important factors directly affecting the fire resistance is the precursor type. It has been concluded that the fire resistance of the concrete prepared by using K-based precursors is higher. Acoustic performances of alkali-activated lightweight concrete vary. It is necessary to use a high amount of aggregate in order to obtain concretes with wide frequency ranges and high absorption coefficient. Contrary to concrete produced from Portland cement, alkali-activated concrete is more resistant to acid and sulfate attacks, since the formation of gypsum and strength is less. © 2022 Elsevier B.V., All rights reserved.Article Citation - WoS: 11Citation - Scopus: 13Evaluation of Diatomite Substitute With Thermal Power Plant Waste Fly Ash in Sustainable Geopolymer Through Life Cycle Assessment(Springer, 2025-02-28) Ilkentapar, Serhan; Orklemez, Ezgi; Durak, Ugur; Gulcimen, Sedat; Bayram, Savas; Uzal, Nigmet; Atis, Cengiz DuranThis research demonstrates the potential of diatomite as a fly ash replacement to improve mechanical properties and environmental sustainability and presents it as a viable alternative for sustainable construction. Additionally, a life cycle assessment (LCA) was conducted on the produced mortars to quantitatively compare their environmental impacts using a cradle-to-gate approach. In mixtures, it was used by replacing the diatomite in the ratios of 1%, 2%, 3%, 4%, and 5% by weight of the fly ash. Workability, unit weight, flexural and compressive strength, abrasion resistance, elevated temperature resistance and microstructure analysis were carried out. The results indicated that replacing 1%, 2%, and 3% diatomite increased the compressive and flexural strength of mortars due to their higher specific surface area. Two percent replacement of diatomite provided the best results. FESEM results of 3% diatomite inclusion showed more intense and compact microstructure of geopolymer. Diatomite inclusion increased the abrasion resistance of geopolymer. Since 2% diatomite replacement was found to be optimum, the LCA results showed that geopolymer mortar with 2% diatomite has 25% lower impacts in terms of global warming potential and 10% lower impacts in terms of terrestrial ecotoxicity than conventional Portland cement mortar.