Scopus İndeksli Yayınlar Koleksiyonu
Permanent URI for this collectionhttps://hdl.handle.net/20.500.12573/395
Browse
8 results
Search Results
Article Citation - WoS: 6Citation - Scopus: 5Photoluminescent and Superhydrophobic Nanocomposites of Perovskite Nanocrystals(Elsevier, 2024-03) Ocal, Sema Karabel; Celik, Nusret; Onses, M. Serdar; Mutlugun, Evren; Karabel Ocal, SemaPerovskite nanocrystals (PNCs) have found extensive utility across diverse technological applications in optoelectronics; nevertheless, their susceptibility to environmental instability poses a significant constraint on their practicality. Within this investigation, we present a novel and facile approach for the development of highly stable superhydrophobic PNCs. These engineered superhydrophobic perovskite nanocrystal composites, referred to as HSNPs@PNCs, demonstrate remarkable optoelectronic attributes, provided that their inherent instability can be effectively mitigated. HSNPs@PNCs manifest an impressive water contact angle of 172 degrees and an exceedingly low sliding angle of 1 degrees, thus showcasing their exceptional superhydrophobicity. Of particular note is the extraordinary stability exhibited by HSNPs@PNCs despite aqueous environments, thermal fluctuations, and UV exposure. Remarkably, even after a prolonged 30 -day immersion in water, this nanocomposite maintains an outstanding emission efficiency of 75 %. Furthermore, the method of application through a spray deposition technique circumvents sample size limitations, thereby amplifying their suitability for industrial applications. Moreover, this study extends the practicality of HSNPs@PNCs by enabling their homogeneous coating onto various surfaces such as glass, fabric, and aluminum, yielding luminescent superhydrophobic surfaces. This approach liberates the substrates from constraints, significantly broadening the potential spectrum of applications for these materials within diverse industrial and technological domains.Article Citation - Scopus: 151Highly Flexible, Electrically Driven, Top-Emitting, Quantum Dot Light-Emitting Stickers(American Chemical Society, 2014-07-18) Yang, Xuyong; Mutlugün, Evren; Dang, Cuong H.; Dev, Kapil; Gao, Yuan; Tan, Swee Tiam; Volkan Demir, Hilmi Volkan; Demir, Hilmi VolkanFlexible information displays are key elements in future optoelectronic devices. Quantum dot light-emitting diodes (QLEDs) with advantages in color quality, stability, and cost-effectiveness are emerging as a candidate for single-material, full color light sources. Despite the recent advances in QLED technology, making high-performance flexible QLEDs still remains a big challenge due to limited choices of proper materials and device architectures as well as poor mechanical stability. Here, we show highly efficient, large-area QLED tapes emitting in red, green, and blue (RGB) colors with top-emitting design and polyimide tapes as flexible substrates. The brightness and quantum efficiency are 20 000 cd/m2 and 4.03%, respectively, the highest values reported for flexible QLEDs. Besides the excellent electroluminescence performance, these QLED films are highly flexible and mechanically robust to use as electrically driven light-emitting stickers by placing on or removing from any curved surface, facilitating versatile LED applications. Our QLED tapes present a step toward practical quantum dot based platforms for high-performance flexible displays and solid-state lighting. © 2014 American Chemical Society. © 2021 Elsevier B.V., All rights reserved.Article Citation - Scopus: 2Deformation Behavior of Nanostructured Aluminum: Experiment and Computational Study(Elsevier Ltd, 2023-04) Deka, Surja; Mozafari, Farzin; Mallick, Ashis K.Nanocrystalline metals have been processed from powder predecessors in recent times in significant ways, and nowadays, materials are starting to be manufactured which are not only strong but also ductile. Nanocrystalline aluminum (Average grain size 51 nm) was synthesized through high-energy ball milling at the room temperature of microcrystalline powder. The particle size and crystallite sizes were obtained by Williamson Hall and found to be in good correlation with transmission spectroscopy (TEM) data. There was a significant increase in the mechanical properties of nanostructured aluminum in comparison to coarse-grained aluminum. Moreover, a phenomenological model of large-deformation, isotropic, rate-dependent plasticity is developed, which takes into account pressure dependency, plastic dilatation, and non-normal flow. The model has been incorporated into a finite element program. Compression and tension experiments were performed on nanocrystalline aluminum, and the constitutive parameters within the model were estimated from these experiments. The present study shows that the constitutive model successfully simulates the mechanical response of nanocrystalline aluminum with reasonable accuracy using our numerical finite-element capability. © 2023 Elsevier B.V., All rights reserved.Conference Object Citation - Scopus: 1Color Simulation and Demonstration of Perovskite Nanocrystal Filters for Wide Color Gamut Displays(Institute of Electrical and Electronics Engineers Inc., 2018-09) Genc, Sinan; Yazici, Ahmet F.; Beskazak, Emre; Uran, Can; Mutlugün, EvrenIn this study, we define spectral parameters of perovskite nanocrystals to improve LCD color gamut, replacing color filters (CFs) with perovskite based subpixels. The optimization of the CFs has been enhanced 15.8% (98.43% of Rec.2020) in simulation and 13.8% experimentally, with 97.37% color gamut coverage. © 2019 Elsevier B.V., All rights reserved.Article Citation - WoS: 2Citation - Scopus: 2Cation Exchange Mediated Synthesis of Bright Au@ZnTe Core-Shell Nanocrystals(IOP Publishing Ltd, 2020-10-16) Sadeghi, Sadra; Melikov, Rustamzhon; Sahin, Mehmet; Nizamoglu, SedatThe synthesis of heterostructured core-shell nanocrystals has attracted significant attention due to their wide range of applications in energy, medicine and environment. To further extend the possible nanostructures, non-epitaxial growth is introduced to form heterostructures with large lattice mismatches, which cannot be achieved by classical epitaxial growth techniques. Here, we report the synthetic procedure of Au@ZnTe core-shell nanostructures by cation exchange reaction for the first time. For that, bimetallic Au@Ag heterostructures were synthesized by using PDDA as stabilizer and shape-controller. Then, by addition of Te and Zn precursors in a step-wise reaction, the zinc and silver cation exchange was performed and Au@ZnTe nanocrystals were obtained. Structural and optical characterization confirmed the formation of the Au@ZnTe nanocrystals. The optimization of the synthesis led to the bright nanocrystals with a photoluminescence quantum yield up to 27%. The non-toxic, versatile synthetic route, and bright emission of the synthesized Au@ZnTe nanocrystals offer significant potential for future bio-imaging and optoelectronic applications.Article Citation - WoS: 51Citation - Scopus: 53CdSe/ZnS Quantum Dot Films for High Performance Flexible Lighting and Display Applications(IOP Publishing Ltd, 2016-06-10) Altintas, Yemliha; Genc, Sinan; Talpur, Mohammad Younis; Mutlugun, EvrenColloidal quantum dots have attracted significant interest in recent years for lighting and display applications and have recently appeared in high-end market products. The integration of quantum dots with light emitting diodes has made them promising candidates for superior lighting applications with tunable optical characteristics. In this work we propose and demonstrate high quality colloidal quantum dots in their novel free-standing film forms to allow high quality white light generation to address flexible lighting and display applications. High quality quantum dots have been characterized using transmission electron microscopy, x-ray diffraction, x-ray photoelectron spectroscopy, steady state and time resolved photoluminescence and dynamic light scattering methods. The engineering of colloidal quantum dot composition and its optical properties in stand-alone film form has led to the experimentally high NTSC color gamut of 122.5 (CIE-1931) for display applications, color rendering index of 88.6, luminous efficacy of optical radiation value of 290 lm/W-opt and color temperature of 2763 K for lighting applications.Conference Object Arrays of Multi-Color Emitting Cesium Lead Halide Perovskite Nanocrystals and Efficient White Light Generation by Tailored Anion Exchange Reactions and Electrohydrodynamic Jet Printing(Optica Publishing Group (Formerly OSA), 2018) Altıntas, Yemliha; Torun, Ilker; Yazici, Ahmet F.; Beskazak, Emre; Onses, Mustafa Serdar; Mutlugün, EvrenWe employ highly efficient and narrow band emitter Cesium-lead-halide perovskite nanocrystals, optimized by the anion exchange method, for efficient white light generation by patterning multiple lines of different colors via proposed electrohydrodynamic jet printing. © 2023 Elsevier B.V., All rights reserved.Article Citation - Scopus: 47Air-Stable, Nanostructured Electronic and Plasmonic Materials From Solution-Processable, Silver Nanocrystal Building Blocks(American Chemical Society service@acs.org, 2014-02-10) Fafarman, Aaron T.; Hong, Sunghoon; Oh, Soongju; Caglayan, Humeyra; Ye, Xingchen; Diroll, Benjamin T.; Kagan, Cherie R.Herein we describe a room-temperature, chemical process to transform silver nanocrystal solids, deposited from colloidal solutions, into highly conductive, corrosion-resistant, optical and electronic materials with nanometer-scale architectures. After assembling the nanocrystal solids, we treated them with a set of simple, compact, organic and inorganic reagents: ammonium thiocyanate, ammonium chloride, potassium hydrogen sulfide, and ethanedithiol. We find that each reagent induces unique changes in the structure and composition of the resulting solid, giving rise to films that vary from insulating to, in the case of thiocyanate, conducting with a remarkably low resistivity of 8.8 × 10-6 ·cm, only 6 times that of bulk silver. We show that thiocyanate mediates the spontaneous sintering of nanocrystals into structures with a roughness of less than 1/10th of the wavelength of visible light. We demonstrate that these solution-processed, low-resistivity, optically smooth films can be patterned, using imprint lithography, into conductive electrodes and plasmonic mesostructures with programmable resonances. We observe that thiocyanate-treated solids exhibit significantly retarded atmospheric corrosion, a feature that dramatically increases the feasibility of employing silver for electrical and plasmonic applications. © 2014 American Chemical Society. © 2014 Elsevier B.V., All rights reserved.