Scopus İndeksli Yayınlar Koleksiyonu
Permanent URI for this collectionhttps://hdl.handle.net/20.500.12573/395
Browse
11 results
Search Results
Article Tuning Properties of Amorphous Boron Via Hydrogenation: An Ab Initio Study(Elsevier, 2026-01) Durandurdu, MuratAb initio simulations are employed to investigate the structural, mechanical, and electronic properties of hydrogenated amorphous boron (a-B:H) across a range of hydrogen concentrations (approximate to 6-21 at.%). The results indicate that pentagonal-like boron clusters constitute the primary structural motifs. The bonding environment consists of both B-H terminal bonds and B-H-B bridging bonds, with the fraction of bridging bonds ranging from 10 % to 16 %. Increasing the hydrogen content leads to a reduction in density and bulk modulus, accompanied by a systematic widening of the electronic band gap. These results demonstrate that hydrogen incorporation profoundly modifies the atomic structure, softens the network, and enhances the semiconducting character of a-B:H, highlighting the tunability of properties in boron-based amorphous materials.Article Citation - WoS: 1Citation - Scopus: 1Quenchable Amorphous Diamond: A Novel High-Pressure Route to Tetrahedral Amorphous Carbon(Wiley-VCH Verlag GmbH, 2025-05-03) Durandurdu, MuratThis study presents a groundbreaking theoretical prediction: the high-pressure transformation of amorphous graphite into a high-fraction sp3-bonded amorphous diamond phase. Employing ab initio molecular dynamics simulations, it is demonstrated that under extreme pressures, amorphous graphite undergoes an irreversible transition to an amorphous diamond phase. Thermodynamic analysis confirms the first-order nature of this sp2-to-sp3 transformation, with the transition predicted to occur at approximate to 33 GPa under experimental conditions. This transformation offers a novel pathway toward the synthesis of amorphous carbon with a high fraction of sp3 bonding, a long-standing challenge in materials science. This work expands understanding of carbon's high-pressure behavior and provides a compelling theoretical foundation for future experimental investigations aimed at synthesizing and characterizing this novel material.Article Pressure-Induced Quenchable Superhard Tetrahedral Amorphous Phase of BC4N(Wiley, 2025-03-13) Durandurdu, MuratThe high-pressure behavior of an amorphous boron carbon nitride (BC4N) composition is investigated using constant-pressure ab initio molecular dynamics simulations. A first-order phase transformation into a tetrahedral amorphous phase with a high fraction of sp3 bonding is observed. This tetrahedral phase is quenchable and exhibits ultra-high incompressibility and a high Vickers hardness (46 GPa), placing it firmly in the category of superhard materials, comparable to tetrahedral amorphous carbon. Tetrahedral amorphous BC4N demonstrates semiconducting behavior with a narrow bandgap of 0.4 eV, making it suitable for applications requiring both mechanical robustness and moderate electronic conductivity. Thermodynamic analyses confirm the likelihood of a first-order sp2-to-sp3 transition, suggesting that such a transformation could occur around 29 GPa under experimental conditions.Article Citation - WoS: 2Citation - Scopus: 2Possible Boron-Rich Amorphous Silicon Borides From Ab Initio Simulations(Springer, 2023-03-10) Karacaoglan, Aysegul Ozlem Cetin; Durandurdu, MuratContextBy means of ab initio molecular dynamics simulations, possible boron-rich amorphous silicon borides (BnSi1-n, 0.5 <= n <= 0.95) are generated and their microstructure, electrical properties and mechanical characters are scrutinized in details. As expected, the mean coordination number of each species increases progressively and more closed packed structures form with increasing B concentration. In all amorphous models, pentagonal pyramid-like configurations are observed and some of which lead to the development of B-12 and B11Si icosahedrons. It should be noted that the B11Si icosahedron does not form in any crystalline silicon borides. Due to the affinity of B atoms to form cage-like clusters, phase separations (Si:B) are perceived in the most models. All simulated amorphous configurations are a semiconducting material on the basis of GGA+U calculations. The bulk modulus of the computer-generated amorphous compounds is in the range of 90 GPa to 182 GPa. As predictable, the Vickers hardness increases with increasing B content and reaches values of 25-33 GPa at 95% B concentration. Due to their electrical and mechanical properties, these materials might offer some practical applications in semiconductor technologies.MethodThe density functional theory (DFT) based ab initio molecular dynamics (AIMD) simulations were used to generate B-rich amorphous configurations.Article Irreversible Changes in Amorphous C3n4 Under Pressure: Loss of Chemical Order and Graphite-Like Character(Taylor & Francis Ltd, 2025-04-03) Durandurdu, MuratThe high-pressure behavior of triazine-based amorphous C3N4, initially exhibiting a chemically ordered, graphite-like structure, was investigated using ab initio molecular dynamics simulations. Our study reveals a pressure-induced transition to a high-density amorphous (HDA) phase characterized by increased coordination number for carbon (3.88) and nitrogen (2.93) atoms. This transition occurs gradually over a broad pressure range, initiated by the breakdown of chemical ordering and the formation of homopolar C-C and N-N bonds, which persist in both the HDA and recovered phases. The recovered phase retains elevated coordination numbers (C: 3.25, N: 2.46) but loses its initial graphite-like topology, evolving into a three-dimensional network structure. Electronic structure analysis reveals semiconducting behavior in the HDA phase and n-type semiconductor characteristics in the recovered phase.Article Citation - Scopus: 1Boron-Rich Amorphous Boron Oxides From Ab Initio Simulations(Elsevier, 2023-03) Karacaoglan, Aysegul Ozlem Cetin; Durandurdu, MuratAmorphous boron oxide (BxO1-x, 0.5 <= x <= 95) configurations are simulated by means of an ab initio molecular dynamics technique and their microstructure and mechanical properties are revealed in details. With increasing B content, the average B-coordination noticeably increases from 3.18 to 5.62 whereas the O-coordination, sur-prisingly, remains almost null, about 2.0. The formation of complete B12 molecules is observed after 80% B concentrations. Chemical segregation is witnessed in most models and hence the resulting configurations show B: B2O3 phase separations. The mechanical properties (bulk, shear and Young moduli, Vickers hardness and microhardness) substantially increase with increasing B content. The amorphous materials (BxO1-x, x >= 80) are classified as hard materials. Within the limitations of DFT calculations and approaches used, we speculate that there is a ductile-to-brittle transition at around 70-75% B contents.Article Citation - WoS: 1Citation - Scopus: 1Atomic Structure and Properties of Amorphous Boron Carbon Nitride (BC2N): An Ab Initio Study(Elsevier Science SA, 2025-03) Durandurdu, MuratThis study investigates the atomic structure and properties of amorphous boron carbon nitride (a- BC2N) using ab initio molecular dynamics simulations. Structural analysis reveals a layer-like topology with varied bonding environments. Unlike the ordered alternating C-C and B-N layers found in the lowest-energy crystalline BC2N structure, a-BC2N features a solid-solution-like arrangement, with B, C, and N atoms randomly distributed within each layer. This randomness gives rise to small, distinct C-rich and BN-rich domains and irregular short zigzag chains of C-C and B-N bonds within each layer. Electronic structure analysis suggests that a-BC2N is likely a semiconductor. Mechanically, a-BC2N displays properties typical of layered materials but with an enhanced bulk modulus.Article Citation - WoS: 5Citation - Scopus: 5Amorphous Silicon Hexaboride at High Pressure(Taylor & Francis Ltd, 2020-03-14) Durandurdu, MuratWe investigate the pressure-induced structural phase transformation of amorphous silicon hexaboride (a-SiB6) using a constant pressure first principles approach. a-SiB6 is found to undergo a gradual phase transformation to a high-density amorphous phase (HDA) in which the average coordination number of both B and Si atoms is about 6. The HDA phase consists of differently coordinated motifs ranging from 4 to 8. B-12 icosahedra are found to persist during compression of a-SiB6 and the structural modifications primarily occur around Si atoms and in the regions linking pentagonal pyramid-like configurations to each other. Upon pressure release, an amorphous structure, similar to the uncompressed one, is recovered, indicating a reversible amorphous-to-amorphous phase change in a-SiB6. When the electronic structure is considered, the HDA phase is perceived to have a wider forbidden band gap than the uncompressed one.Article Citation - WoS: 2Citation - Scopus: 2Amorphous Boron Carbonitride (BC4N) From Ab Initio Simulations(Elsevier, 2024-09) Durandurdu, MuratThis study utilizes ab initio molecular dynamics simulations to explore the structure and properties of amorphous boron carbonitride (a-BC4N). A 432-atom model, generated via a conventional melt-and-quench technique, exhibits a graphite-like structure with all elements possessing an average coordination number of about 3.0. C atoms dominate within individual layers, interspersed with distinct BN domains. This atomic arrangement deviates considerably from that proposed for crystalline BC4N structures. Despite this structural variation, the aBC4N model is likely a narrow band gap semiconductor (0.15 eV), similar to its crystalline counterparts. In terms of mechanical properties, a-BC4N demonstrates similarities with various layered materials while exhibiting a notably larger bulk modulus.Article Citation - WoS: 3Citation - Scopus: 3Amorphous Boron Phosphide: An Ab Initio Investigation(Elsevier, 2021-10) Bolat, Suleyman; Durandurdu, MuratWe generate a structural model of amorphous boron phosphide (BP) by quenching the melt via ab initio molecular dynamics calculations and compare it structurally and electrically with the crystal. We find that both phases of BP have a significantly different short-range order. Namely, the amorphous network presents strong chemical disorder and structural defects. P-atoms form only undercoordinated defects while B atoms present both undercoordinated and overcoordinated defects. The mean coordination number of B and P atoms is 4.17 and 3.69, correspondingly. Some of overcoordinated B atoms with chemical disorder yield the formation of pentagonal-pyramid-like motifs and a cage-like B10 cluster in the amorphous network. About 13 % volume expansion is observed by amorphization, probably due to the low-coordinated structural defects. The amorphous configuration is semiconductor as in the crystal but has a smaller energy band gap.