Scopus İndeksli Yayınlar Koleksiyonu
Permanent URI for this collectionhttps://hdl.handle.net/20.500.12573/395
Browse
7 results
Search Results
Master Thesis PERFORMANCE EVALUATIONS OF SINGLE MODE OPTICAL RECEIVER FOR DEGRADED VISUAL FIELD AND PHOTONIC LANTERN BASED COHERENT DETECTION(Abdullah Gül Üniversitesi, 2016) ORAN, ABDULLAHImaging at degraded visual environments is one of the biggest challenges in today’s imaging technologies. Especially military and commercial rotary wing aviation is suffering from impaired visual field in sandy, dusty, marine and snowy environments. For example, during landing the rotor churns up the particles and creates dense clouds of highly scattering medium, which limits the vision of the pilot and may result in an uncontrolled landing. The vision in such environments is limited because of the high ratio of scattered photons over the ballistic photons that have the image information. In this thesis, we propose to use optical spatial filtering (OSF) method in order to eliminate the scattered photons and mainly collect the ballistic photons at the receiver. OSF is widely used in microscopy; to the best of our knowledge this thesis will be the first application of OSF for macroscopic imaging. Our experimental results show that most of the scattered photons are eliminated using the spatial filtering in a highly scattering degraded visual field. The results are compared with a standard broad area photo detector which shows the effectiveness of spatial filtering. Free space optical systems have applications in different areas such as laser ranging, three-dimensional imaging, weather predictions and optical wireless communication. Some applications require very high performance free space optical systems that are not available today. The need of systems with higher performance and lower size, weight and power (SWaP) is the biggest research motivation of free space optical systems. Between various detection techniques, vi coherent optical detection comes forward for applications that require high sensitivity and bandwidth. Coherent detection based LIDAR systems have the potential to provide quantum noise limited performance. However coherent systems suffer from poor free space to fiber collection efficiency due to the single mode detection characteristics and small size of the optical fiber. In order to overcome this problem, photonic lantern is introduced to effectively collect the multimode beam coming from free space and convert it to a number of single mode fibers. The photonic lantern consists of a multimode fiber to a number of single-mode fibers. The collection efficiency enhancement of photonic lanterns have been investigated, however there is no study on the signal to noise ratio –performance- improvement on the photonic lantern based free space coherent systems. In this thesis; the effect of random distribution of the optical power in the 19-port photonic lantern will be investigated mathematically. The photonic lantern based coherent detection system performance will also be simulated by using the MATLAB software. The output of this thesis may open the path to experimental demonstration and maybe even to a prototype.Master Thesis Phase noise filtering effects of mode-locked lasers(Abdullah Gül Üniversitesi, 2018) MBONDE, HAMIDUThe subject of Mode-Locked Lasers has experienced a massive growth over the last two decades. Previously meant as the source of ultra-short optical pulses, its concepts have recently expanded to be applicable in areas beyond Optics such as Biomedical[1], Micro-machining[2], Sensing[3] and RF/Microwaves communication[4]. In particular this thesis focuses on application of Mode-Locked Lasers in RF/Microwave communications. One of the common problems with RF communication systems is signal integrity. Due to the nature of oscillation systems that are used to produce RF signals there is always an inevitable amount of undesirable signal associated with main signal being generated. These spurious (noise) signals have significant effect on the efficient performance of particular RF system. Low noisy RF signals are highly desirable and have many applications in high speed communication, RADAR and electronic warfare. Therefore it is critical to have an efficient means of producing low noise RF signals. Generating RF signals by Optical means has emerged as a major solution to this problem. Various methods for optically generating lower noise RF signals of high frequency have been developed such as frequency stabilized mode-locked lasers[5], phase locked loop based oscillators[6] and optoelectronic oscillators[7]. In this thesis a novel approach to this problem is presented, instead of generating lower noise signals a unique method of efficiently filtering the noise of RF signal using Mode-Locked Laser is explained. The first two chapters give brief introduction to mode-locked lasers and phase noise in oscillator, the concepts which will be used throughout this thesis. Then the experimental setups of the proposed system with the results obtained are presented in Chapter 3. Furthermore, theoretical study and analysis of limitations of this method is presented in ii Chapter 4. This includes analysis of these limitations as well as supporting simulations results. Phase noise is frequency domain term which in time domain is referred to as jitters. For various applications it is necessary to determine total jitters value of the system in order to estimate its bit error rates and other performance features. Chapter 5 of this thesis is dedicated to introducing jitter concept and a numerical method of converting a phase noise spectrum into jitter Probability Density Function (PDF).Together with the MATLAB code for aforementioned simulation a special GUI (Graphical User Interface) has been developed for the purpose of converting any given phase noise spectrum into its corresponding jitter PDF. The last chapter gives some concluding remarks and look at the possible futures of this work.Conference Object Effect of Bilinear Interpolation on the Texture Analysis of Colonoscopy Images(IEEE345 E 47TH ST, NEW YORK, NY 10017 USA, 2017) Kacmaz, Rukiye Nur; Yilmaz, BulentInterpolation is a method that is used to obtain unknown intensities with the help of known intensities on an image. This method is frequently used in the literature to eliminate light reflection on colonoscopy images. Texture features are the most important characteristics used to describe the region or objects of interest in the image. They are the measures of intensity variation of a surface that determine properties such as smoothness, roughness, and regularity. The aim of this study is to find out the how bilinear interpolation applied on colonoscopy images with reflection impact texture features obtained from the same images. A research carried out to make reasonable comparison between a texture feature from an image with no reflection and the same feature obtained from the same image with synthetically added reflections with various percentages. Using the approaches like gray level co-occurence matrix (GLCM), gray level run length matrix (GLRLM), neighborhood gray tone difference matrix (NGTDM) 126 features were extracted from each 32x32 sub-images coming from 610 colonoscopy images. Several of the features extracted from sub-images with no reflection and reflection were not statistically significantly different, while majority of them were affected from the reflections.Master Thesis Centella asiatica extract containing bilayered electrospun wound dressing(Abdullah Gül Üniversitesi, 2019) KOÇ, NURAY; İşoğlu, İsmail AlperInnovative and bioactive wound dressings prepared by electrospinning mimicking the native structure of the extracellular matrix (ECM) have gained significant interest as an alternative to conventional wound care applications. In this study, bilayered wound dressing material was produced by sequential electrospinning of quaternized poly(4- vinyl pyridine) (upper layer) on the Centella Asiatica (CA) extract containing electrospun poly(D, L-lactide-co-glycolide) (PLGA)/poly(3-hydroxybutyrate-co-3- hydroxy valerate) (PHBV) blend membrane (lower layer). Scanning electron microscopy (SEM) was utilized to show a uniform and bead-free fiber structure of electrospun membranes. The average diameter of CA extract containing electrospun PLGA/PHBV blend membrane was calculated 0.471±0.11 µm, whereas the average fiber diameter of electrospun poly(Q-VP) membranes was in the range of 0.460±0.057 µm. Chemical, thermal, mechanical properties, and adsorption capacity of electrospun membranes, as well as the cumulative release of CA from the electrospun PLGA/PHBV membrane, were investigated. Viability, adhesion, and attachment of human fibroblast cells on the electrospun membranes on pre-set days were evaluated by the colorimetric CellTiter 96® Aqueous One Solution Cell Proliferation Assay (MTS assay) and SEM. Results revealed that CA loaded bilayered electrospun wound dressing showed promoted attachment and proliferation of fibroblasts. Hence, it can be concluded that CA extract containing bilayered electrospun wound dressing prepared in this study has a promising potential for wound healing applications.Conference Object Course of unborn baby's heart by wireless baby tracking system(IEEE Computer Society, 2013-11) Özbilen, Metin Mete; Yigit, Enes; Isiker, Hakan; Kaplanoglu, MustafaThe most important problem for pregnant and gynecologist is tracking of unborn baby. An important part of infant deaths occur in the last months of pregnancy. For this reason, by using an external fetal monitor non-stress test (NST) measurements are done for gathering information about the baby's condition. This method is a procedure that requires specialist from a medical center. The proposed study aims wirelessly transmission of NST measurement results to the specialist or health center. Thus, in case of any particular problems by giving notice to the patient, it is intended to provide her being shipped to the nearest medical facility.Article Phase-Synchronized Fluidic Oscillator Pair(AMER INST AERONAUTICS ASTRONAUTICS, 1801 ALEXANDER BELL DRIVE, STE 500, RESTON, VA 22091-4344 USA, 2019) Tomac, Mehmet N; Gregory, James W.The relative phase of oscillating jets from a pair of fluidic oscillators was synchronized in this work. The means for this synchronization was mutual interaction through a shared feedback channel between the two oscillators. Flow visualization and hot-wire measurements indicated a strong correlation and phase synchronization between the two oscillators. A numerical analysis offered better understanding of the internal flow physics that led to the synchronization phenomenon. A portion of the output jet from one fluidic oscillator was redirected and crossed over into the adjacent oscillator, leading to momentum transfer between the two oscillators. A portion of this cross-oscillator flow was directed into the shared feedback channel and constituted the main feedback flow. In this process, one of the shared feedback channel outlets was blocked by a vortex, allowing only one oscillator to receive feedback flow. The primary mechanism for in-phase synchronization was the cross-oscillator flow, which was divided into phase-modulated momentum injection to the primary jet and modulated flow input to the shared channel feedback channel.Article A rational utilization of reinforcement material for flexural design of 3D-printed composite beams(SAGE PUBLICATIONS LTD, 1 OLIVERS YARD, 55 CITY ROAD, LONDON EC1Y 1SP, ENGLAND, 2019) Ciftci, Cihan; Sas, Hatice S.Recent developments in composite industry address the adaptation of 3D printing technology to overcome the design and manufacturing challenges of the traditional composite processing techniques. This adaptation can be performed with the development of design methodologies corresponding to the type of structural load-carrying members in a structure. Considering the frequently use of beams in structures, the development of the design methodology of beams is essential for the adaptation of the additive manufacturing. Therefore, in this paper, the flexural loading concept is analytically formulated to derive moment capacity for the flexural behavior of 3D-printed composite beams. Then, the formulation is adapted to develop a design methodology of 3D-printed laminates under flexural loading. Additionally, the analytical solutions developed for the design methodology presented in this paper were verified with a good agreement with experimental studies.