Scopus İndeksli Yayınlar Koleksiyonu
Permanent URI for this collectionhttps://hdl.handle.net/20.500.12573/395
Browse
3 results
Search Results
Article Citation - WoS: 7Citation - Scopus: 4Separation of Fe and Mn From Manganiferous Iron Ores via Reductive Acid Leaching Followed by Magnetic Separation(Springer, 2019-08-01) Top, S.In this study, a process to separate manganese and iron from manganiferous iron ores by reductive acid leaching followed by magnetic separation was conceived and experimentally tested. In the leaching process, sulfuric acid was used as lixiviant and oxalic acid was used as reductant. The experimental results showed that the manganese and iron separation was optimum when the concentration of the sulfuric acid and oxalic acid were 0.75 M and 30 g/L, respectively, at a temperature of 80 °C, a solid/liquid ratio of 67 g/L, stirring speed of 400 rpm, and leaching duration of 60 min. Under this condition, 90.49% and 6.78% of Mn and Fe were dissolved, respectively, from the ore sample with a size fraction of − 106 μm. It was determined that the leaching of manganese from the ores was a second-order reaction with an activation energy (E<inf>a</inf>) of 53.38 kJ/mol. The leaching residues obtained under the optimum condition were subjected to high-intensity wet magnetic separation tests to recover the remaining iron content. This separation process produced a concentrate containing 56.20% Fe and 1.79% Mn with iron and manganese recoveries of 56.83% and 66.73%, respectively. A magnetic separation test from an unleached ore sample was also carried out as a benchmark. To the best of our knowledge, this is the first time that a magnetic separation process was used to a residue obtained from reductive acid leaching of manganiferous iron ores to recover iron. © 2019, Society for Mining, Metallurgy & Exploration Inc.Conference Object Citation - Scopus: 2Investigation of the Beneficiation of Low Grade Manganese Ores(Chamber of Mining Engineers of Turkey maden@maden.org.tr, 2013) Bayat, Oktay; Altiner, Mahmut; Top, S.In this study, beneficiation of low grade manganese ores was investigated by applying high intensity dry magnetic separation, MGS (Multi Gravity Separator) and flotation methods. Manganese grades of the ores were 25.65% Mn and 13.96% Mn taken from Antalya and Kayseri regions, respectively. Flotation and magnetic separation recoveries of both tested samples were low and the grades of the concentrates were less than 45% Mn. Similar results were also observed using a lab-type MGS but a concentrate could be obtained with 41.24% Mn and 78.71% recovery for manganese ores taken from Antalya region. © 2014 Elsevier B.V., All rights reserved.Article Citation - WoS: 6Citation - Scopus: 6Concentration Study of a Specularite Ore via Shaking Table, Reverse Flotation, and Microwave-Assisted Magnetic Separation(Taylor & Francis inc, 2022-11-03) Al-Dhubaibi, Ammar Mahdi Ahmed; Vapur, Huseyin; Top, Soner; Sivrikaya, OsmanDespite the difficulties in pelletizing specularite-type refractory iron ores, the utilization of these resources is indispensable for the steel industry due to the increasing need for iron. This study investigated Fe recovery from a refractory iron ore using gravity separation, reverse flotation, and two-stage magnetic separation. Tilt angle and particle size had a significant effect on the grade and recovery of concentrates in shaking table tests. Gravity concentration at optimum conditions resulted in an iron concentrate with 64.47% Fe grade and 90.73% Fe recovery. In the reverse flotation tests, the frother and depressant substantially affected the Fe grade of concentrates while the collector influenced the Fe recovery. A 90% Fe recovery with 64.69% Fe grade was obtained within optimum flotation conditions. The Fe grades were raised to >67.5% in products after the first magnetic separation. The tailings of the first magnetic separation were subjected to the second magnetic separation after microwave-assisted roasting to increase the magnetic susceptibility. In the second magnetic separation, a concentrate containing 66.06% Fe was separated from the microwave-roasted non-magnetic material with 82.23% Fe recovery. To the best of our knowledge, the microwave-roasting method has been applied to a specularite-type refractory iron ore for the first time.