Scopus İndeksli Yayınlar Koleksiyonu
Permanent URI for this collectionhttps://hdl.handle.net/20.500.12573/395
Browse
16 results
Search Results
Article Effects of Alkanolamines on Calcium Sulfoaluminate Belite Cement Hydration and Fresh Properties(Emerald Group Publishing Ltd, 2026) Uzal, Burak; Wilkinson, Angus P.; Qoku, Elsa; Nguyen, Tu-Nam; Kurtis, Kimberly E.Calcium sulfoaluminate belite cements have found widespread use in specialised applications but have not been applied broadly due to rapid setting times. Conventional set retarders such as citric and tartaric acids modify hydration kinetics, introducing ancillary effects that alkanolamines may avoid. This study examined the effects of three alkanolamines, triisopropanolamine (), triethanolamine () and diisopropanolamine (), on early hydration at 0.02% dosage; was also tested across a broader dosage range. Reaction kinetics and phase evolution were examined in pastes by calorimetry, thermogravimetric analysis () and in situ quantitative X-ray diffraction () for 72 h of hydration, along with setting time and amplitude-sweep rheometry. Calorimetry showed that and delayed and reduced the main cement hydration peak, while all alkanolamines delayed and enhanced the shoulder and secondary hydration peaks. In situ and suggested that alkanolamines decrease ettringite and alumina gel formation by 24 h and may lead to poorly crystallised ettringite that cannot be quantified by . Alkanolamine-containing samples demonstrated increased storage and loss moduli and extended linear viscoelastic ranges. A consistent grouping of similar behaviour emerged: control/TIPA versus TEA/DIPA, suggesting distinct mechanisms. Finally, among the alkanolamines, was the most effective, increasing the setting time by 18 min.Article Citation - WoS: 8Citation - Scopus: 8Very High Early Strength Calcium Aluminate Based Binary and Ternary Cementitious Systems: Properties, Hydration and Microstructure(Taylor & Francis Ltd, 2023-06-16) Saydan, Murat; Keskin, Ulku Sultan; Uzal, BurakCalcium aluminate cement (CAC) is a cement type that has superior properties such as rapid strength gain, high resistance to high temperatures and harmful chemicals. However, the result of the using of CACs in the production of structural elements occur strength decreases at later ages as a result of a series of chemical reactions called 'conversion reactions' seen in these cements. In this study, the hydration kinetics and the crystalline and amorphous structures formed as a result of hydration were investigated in CAC containing different amounts and types of main oxides-based binary and ternary systems. Considering the results obtained, the main hydration product seen in these specimens was ettringite. Unlike many studies in the literature, metastable structures which cause conversion reactions, such as CAH(10), C(2)AH(8), have not been observed. Instead of conversion of the phases, ettringite needles were became thin and elongate which causes the paste structure porous and thus causing expansion and strength reduction at the later stages of hydration in some mixtures produce high amounts of ettringite. On the other hand, it is understood that the formation of stratlingite was limited strength decreases in systems where high silica fume is used.Article Citation - WoS: 12Citation - Scopus: 14Role of Inclusion Size Distribution of Titanium Dioxide on the Nitrogen Oxides Reduction Capability and Microstructural Characteristics of Cementitious Systems(Elsevier Sci Ltd, 2022-02) Bahsi, Emrah; Sahin, Oguzhan; Ilcan, Huseyin; Uzal, Burak; Gunal, Muhammed Faruk; Yildirim, Gurkan; Sahmaran, MustafaThis paper explores the effect of the inclusion size of titanium dioxide (TiO2) particles on a variety of performance properties of cementitious systems via experimental studies. In addition to comprehensive microstructural analysis including pore size distribution and scanning electron microscopy with energy-dispersive X-ray spectroscopy (SEM-EDX) analyses, particular consideration was given to the effect of particle size distribution (PSD) of TiO2 particles on mechanical and photocatalytic properties and hydration kinetics of cementitious systems. Nano-sized, submicron-sized and micron-sized anatase-phase TiO2 powders were utilized as photocatalysts at a dosage of 5% by total weight of powder material. In addition to the single use of TiO2 particles with three different size ranges (nano, submicron and micron), they were also used in combination by adjusting their PSDs with three different PSD moduli (q): 0.1, 0.5, and 0.9. Test results show that techniques for achieving optimal microstructural characteristics of cementitious systems also help design and improve their performance in favor of multifunctionality. As a result of PSD optimization of TiO2 particles with three different size ranges, which was significantly influential on the microstructure of the cementitious systems, superior photocatalytic degradation results were obtained from mixtures containing lower amounts of nano-sized TiO2 particles. Cementitious composites with denser microstructure showed lower performance in terms of being able to maintain photocatalytic degradation capability for a prolonged period, whereas the opposite was the case for compressive strength.Article Citation - WoS: 10Citation - Scopus: 10Reaction Kinetics and Properties of Pumice-Based Geopolymer Systems Cured at Room Temperature(Elsevier Sci Ltd, 2023-12) Kucukyildirim, Enver; Yorulmaz, Hediye; Durak, Ugur; Ilkentapar, Serhan; Uzal, Burak; Karahan, Okan; Atis, Cengiz DuranThis research investigated the kinetics of pumice-based geopolymer systems and their physical and mechanical properties. The effect of the Na2SiO3/NaOH ratio of geopolymer systems on the rate of heat evolution and total heat of reaction were examined via isothermal calorimetry of geopolymer pastes prepared with Na2SiO3/NaOH ratios of 2.5, 3, and 3.5. Hardened pastes were also studied with thermo-gravimetric analysis to determine weight loss. In addition, the unit weights and compressive strengths of the pastes prepared using pumice were measured. Although the hydration process starts the earliest in pumice-based geopolymer pastes with a Na2SiO3/ NaOH ratio of 2, they have the lowest total hydration temperature. Na2SiO3/NaOH ratio of 2.5 by mass, shows higher weight loss obtained from TGA results. The compressive strength of the paste sample, prepared with a Na2SiO3/NaOH ratio of 3.5 by mass, was the highest, with 36.30 MPa at 28d. Depending on the Na2SiO3/NaOH ratio, it is thought that as the amount of Na2SiO3 increases in the samples, silica gel formation increases in later ages.Article Citation - WoS: 22Citation - Scopus: 23Practical Charts to Identify the Predominant Clay Mineral Based on Oxide Composition of Clayey Soils(Elsevier, 2017-01) Sivrikaya, Osman; Uzal, Burak; Ozturk, Yunus EmreThis study proposes some useful practical charts representing the relationships between oxide composition and the type of predominant clay mineral present in clay soils. In order to produce the charts, the data set are collected from published literature. Some useful classification schemes for predominant clay mineral type were obtained by using binary and ternary graphs of oxide composition data. The most successful relations indicating the type of clay mineral have been found on SiO2 versus Al2O3 + Fe2O3 + FeO, SiO2 versus MgO + CaO + Na2O + K2O binary plots, SiO2 Al2O3 Others and SiO2 - Al2O3 - K2O ternary plots. (C) 2016 Elsevier B.V. All rights reserved.Article Citation - WoS: 79Citation - Scopus: 83Influence of NaNo SiO2 and NaNo CaCo3 Particles on Strength, Workability, and Microstructural Properties of Fly Ash-Based Geopolymer(Ernst & Sohn, 2020-05-06) Durak, Ugur; Karahan, Okan; Uzal, Burak; Ilkentapar, Serhan; Atis, Cengiz DuranThe influence of nano SiO2(NS) and CaCO3(NC) particles on the properties of class F fly ash based geopolymer mortar activated with different sodium ion concentrations have been investigated. Mortar mixture proportions were 1:3:0.3 for binder, sand, and water, respectively. Nano SiO2 and CaCO3 particles were replaced with a binder by weight basis at the ratios of 1, 2, and 3% in the mixtures. Sodium concentrations amount used were 8, 10, and 12% Na+ of binder content. Geopolymer mortar samples were cured at 60, 75, and 90 degrees C in a furnace for 24, 48, and 72 hr. After the heat curing process, flexural, and compressive strength tests were performed. The changes in the microstructure of geopolymer due to influence of nanoparticles were examined by utilizing isothermal calorimetric studies on geopolymer paste, and field-emission scanning electron microscopy (FESEM). Based on laboratory work results, it was concluded that for all sodium ion concentrations, the addition of nano SiO2 and CaCO3 particles improved the flexural and compressive strengths after 24 hr heat curing. However, the favorable effects of nanoparticles on strength properties tend to disappear after 48 and 72 hr heat curing. The results of isothermal calorimetric studies showed that nano SiO2 and CaCO3 particles accelerated the geopolymeric reactions at an early age. FESEM results showed that additions of nanoparticles made the microstructure of geopolymer products more intense and compact.Article Citation - WoS: 34Citation - Scopus: 38Green Building Envelope Designs in Different Climate and Seismic Zones: Multi-Objective ANN-Based Genetic Algorithm(Elsevier, 2022-10) Himmetoglu, Salih; Delice, Yilmaz; Aydogan, Emel Kizilkaya; Uzal, Burak; Kızılkaya Aydoğan, EmelIn recent years, the major component of green building designs adopted by governments in order to reduce CO2 emissions as well as energy consumption is the green building envelope. The green envelope has the most important share in terms of thermal energy consumption, environment, and indoor comfort criteria. Determining the most suitable building envelope combination in the building life cycle is an important problem for designers. This study presents a new multi-objective approach that determines the most suitable green envelope designs for the buildings in different climate and earthquake zones, taking into account CO2 emissions, heating/cooling energy consumption, and material cost in terms of life cycle cost analysis. To this end, EnergyPlus building performance simulation program, artificial neural network (ANN), and genetic algorithm are used together. After the heating and cooling energy consumption, CO2 emissions, and material cost values are obtained for a certain number of the envelope alternatives with the EnergyPlus, ANN models that learn the working mechanism of EnergyPlus are trained according to these values. An ANN-based genetic algorithm procedure is developed to search the whole envelope alternative space by using the trained ANN models with EnergyPlus. The proposed approach allows searching in a very short time the whole alternative space, which is almost impossible to scan with EnergyPlus by reducing the time spent and the number of alternatives required for the design and simulation processes of the green building envelope. The proposed approach is performed for a design-stage city hospital structure in Turkey. Window type, the internal/external plaster, wall, and insulation materials along with the thicknesses of these materials, which consist of 46 different variables, are determined as envelope attributes for four different climate and seismic zones. The green building envelope designs obtained with the proposed approach are entered into EnergyPlus and the consistency of the results is compared. ANN models with an average accuracy of over 97% are developed. Without the CO2 emission cost in the life cycle cost, the mean absolute percent error (MAPE) values for each region are 0.67%, 0.6%, 0.58%, and 1.78%, respectively. With the CO2 emission cost in life cycle cost, the MAPE values for each region are 0.96%, 0.88%, 0.86%, and 0.43%, respectively. According to the obtained results, there is a consistency of over 99% between EnergyPlus and the proposed approach.Book Part Citation - Scopus: 1Energy Simulation Optimization for Building Insulation Materials(Springer International Publishing, 2023) Himmetoğlu, Salih; Delice, Yılmaz; Kızılkaya Aydoğan, Emel Kizilkaya; Uzal, Burak; Aydoğan, Emel KızılkayaRecently increased energy consumption and carbon emissions caused by energy consumption have mobilized governments. Energy-efficient building designs have become one of the most fundamental strategies preferred by governments. The heating and cooling demands have an important share in energy consumption in buildings. Therefore, thermal insulation systems have become the basic building elements to design energy-efficient buildings. Determining suitable thermal insulation strategies for energy-efficient structures built in different climates is an important decision problem for designers. This study aims to select insulation material and insulation thickness for energy-efficient building design. The stone wool, extruded polystyrene (XPS) insulation materials, and their alternative thicknesses are considered for Turkey’s two different climate zones. The Energy Plus and Design Builder energy simulation programs are used to analyze all alternatives. A decision support system is generated by considering both the material cost and the heating and cooling energies to be consumed during the building life cycle. The most suitable insulation material for the first zone is stone wool, and its thickness is 10 cm. The most suitable insulation material for the second zone is stone wool, and its thickness is 10 cm. The total saving is 11% for the building in the first zone. The total saving is 9% for the building in the second zone. The generated designs have been quite stimulating for decision-makers. © 2024 Elsevier B.V., All rights reserved.Article Effects of Dry Particle Coating With Nano-and Microparticles on Early Compressive Strength of Portland Cement Pastes(Tulpar Academic Publishing, 2021-12-16) Yorulmaz, Hediye; Özuzun, Sümeyye; Uzal, Burak; İLkentapar, Serhan; Durak, Uğur; Karahan, Okan; Atis, C. D.It is known that nano-and microparticles have been very popular in recent years since their advantages. However, due to the very small size of such materials, they have very high tendency to agglomeration particularly for nanoparticles. Therefore, it is critical that they are properly distributed in the system to which they are added. This paper investigated the effects of dry particle coating with nano-and microparticles to solve the agglomeration problem. For a clear evaluation, paste samples were preferred to detemine the compressive strength. Nano-SiO<inf>2</inf> and nano-CaCO<inf>3</inf>, microCaCO<inf>3</inf> and micro-SiO<inf>2</inf>, also known as silica fume, were selected as particulate additives. It was studied by the addition of various percentages (0.3, 0.7, 1, 2, 3 and 5%) of nano-and microparticles in cementitious systems, replacing cement by weight with and without dry particle coating. Dry particle coating was made by using a highspeed paddle mixer. Portland cement and additive particles were mixed at 1500 rpm for 30 seconds in high-speed powder mixer designed for this purpose. The 3-day compressive strength of the cement-based samples to which particles were added at the specified rates was determined and the effect of the dry particle coating on the early strength was investigated. According to the results, it was observed that the production of paste with the dry particle coating technique gave higher compressive strength compared to the production of paste directly in early period. Especially with dry particle coating, compressive strength increased more than 100% in paste samples containing 0.3% nano-SiO<inf>2</inf> compared to direct addition without coating. © 2024 Elsevier B.V., All rights reserved.Article Citation - WoS: 8Citation - Scopus: 8Effect of Nano-SiO2 on Strength and Hydration Characteristics of Ternary Cementitious Systems(Springer Heidelberg, 2023-05-31) Yorulmaz, Hediye; Uzal, Burak; Karahan, Okan; Durak, Ugur; Ilkentapar, Serhan; Atis, Cengiz DuranThis paper shows results of laboratory study on the effects of nano-SiO2 on Portland cement-fly ash systems. It is aimed to improve performance of fly ash-cement systems, particularly at early age, with the inclusion of nano-SiO2. In order to observe the effects of nano-SiO2 particles on the strength and hydration kinetics of fly ash blended cementitious systems, binary and ternary systems were prepared by adding 0.25-1.5% nano-SiO2 by weight of blended cements. Workability, setting time, water absorption capacity, fire resistance, compressive strength and isothermal calorimeter tests were conducted on the cementitious systems. The results indicate that increasing quantity of fly ash increased workability, setting time, water absorption capacity of cementitious systems, whereas the increasing quantity of nano-SiO2 reduced these values. Significant increment in compressive strength were observed, especially at early ages of fly ash-cement systems with nano-SiO2 addition, compared to fly ash added systems, which may compensate for the decrease in compressive strength caused by fly ash. Nano-SiO2 addition accelerated hydration reactions at early age. By partially eliminating the negative effects of fly ash with nano-SiO2, high rates of fly ash can be used in cementitious systems, thus forming more sustainable systems.