Scopus İndeksli Yayınlar Koleksiyonu
Permanent URI for this collectionhttps://hdl.handle.net/20.500.12573/395
Browse
8 results
Search Results
Article Citation - WoS: 7Citation - Scopus: 7Separation of Mn and Fe From a Manganiferous Iron Ore Using Horse Dung as Reductant: A Zero Waste Approach(Springer, 2022-01-13) Top, Soner; Altiner, Mahmut; Kursunoglu, SaitThe separation of manganese and iron from a manganiferous iron ore using horse dung (biomass) as reductant was investigated in a sulfuric acid solution, and 99.80% Mn and 17.76% Fe were extracted into the solution under these leaching conditions: 1 M sulphuric acid concentration, 120 g/L biomass, 1/10 solid to liquid ratio, 300 rev/min stirring speed, 90 degrees C leaching temperature, and 3 h leaching time. In the first precipitation step, the iron and aluminum were first rejected from the solution at pH 5.04. Thereafter, 98.58% Mn was precipitated at pH 10 in the second step. The precipitate was identified as a pyrochroite mineral. After the leaching, the residue was subjected to a carbothermal reduction process conducted at 700 degrees C for 10 min in the presence of no extra reductant. The residue was converted to magnetite mineral, which can be easily recovered by magnetic separation. Based on the experimental results, a flowsheet has been proposed.Article Citation - WoS: 7Citation - Scopus: 7Recovery of Lithium From Spent Coin-Type Lithium Manganese Dioxide Cr Cells by Acidic Leaching in the Presence of Potassium Permanganate as Oxidant(Springer, 2022-09-20) Kursunoglu, Sait; Top, Soner; Altiner, Mahmut; Ozsarac, Safak; Kaya, MuammerThe selective leaching of lithium from spent coin-type lithium manganese dioxide CR cells by oxidative leaching and precipitation of Li2CO3 from Li-bearing leach solution has been experimentally and theoretically investigated. The oxidative leaching experiments were carried out using sulfuric acid in the presence of potassium permanganate (KMnO4). The dissolutions of lithium, manganese, nickel, and cobalt were found to be 84.8%, 0.9%, 46.6%, and 9.7%, respectively. The results demonstrated that a considerable amount of manganese and cobalt remained in the leach residue. The Li-bearing leach solution was fed to an impurity removal stage. It was observed that a substantial amount of lithium loss, along with manganese, nickel, and cobalt, was determined at pH 10. At standard temperature and pressure, the species of lithium as a function of pH, lithium concentration, and carbonate concentration was evaluated for the generation of Li2CO3 from the oxidative leach solution. The results revealed that the precipitation of lithium as lithium carbonate is thermodynamically feasible from the solution at high pHs.Article Citation - WoS: 4Citation - Scopus: 3Recovery of Vanadium and Nickel From a High Caco3 Containing Petroleum Coke Ash by Roasting and Acidic Leaching(Springer, 2023-11-08) Yurtseven, Ozgun; Ibrahim, Ahmedaljaali Ibrahim Idrees; Top, Soner; Kursunoglu, Sait; Altiner, MahmutIn this study, it was aimed to extract vanadium (V) and nickel (Ni) from a petroleum coke ash (PCA) using a roasting process without additives, followed by leaching with sulfuric acid (H2SO4). The experiments were designed based on the Taguchi approach, taking into account the parameters of temperature, acid concentration, time, and solid ratio. Additional leaching tests were conducted on the non-roasted PCA for comparison, to assess the effect of roasting on the extractions of V and Ni. The results showed that no extra reducing agent was needed as the PCA contained high levels of CaCO3, which could be used as a reducing agent during roasting. It was found that roasting was essential for high Ni extractions, but had no strong effects on V extractions. The Ni extraction was found to be between 13.3 and 80.8% for the non-roasted PCA and between 43.6 and 99.3% for the roasted PCA. The V extraction was between 36 and 97.9% for the non-roasted PCA and between 45.4 and 99.9% for the roasted PCA. The optimal leaching conditions were determined to be a sulfuric acid of 4.5 M, a solid ratio of 10%, a temperature of 75 degrees C, and a time of 75 min. In addition, it was determined that the leaching conditions had a great effect on the oxidation state of vanadium ions, and an increase in the acid concentration led to the formation of V3+ ions (green color) instead of VO2+ ions (blue color) in the pregnant leach solution. The final pregnant leach solution containing 1056.50 mg/L V, and 251.85 mg/L Ni was achieved with an extraction yields of > 98%. The experimental results were greatly fitted by the shrinking core model and the activation energy (E-a) for V and Ni was calculated as 3.60 and 4.01 kJ/mol, indicating that the leaching mechanism can be explained by the diffusion control model.Article Citation - WoS: 7Citation - Scopus: 10Recovery of Lead and Zinc From a Citric Leach Solution of a Non-Sulfide Type Ore Flotation Tailing via Precipitation Followed by Solvent Extraction(Springer, 2023-01-12) Hussaini, Shokrullah; Tita, Angela Manka; Kursunoglu, Sait; Top, Soner; Kaya, MuammerThe recovery of zinc (Zn) and lead (Pb) from a citric leach solution of a non sulfide type ore flotation tailing was examined utilizing sulfuric acid precipitation followed by solvent extraction using di(2-ethylhexyl) phosphoric acid (D2EHPA) as the extractant. Following lead precipitation (98.9%) with sulfuric acid, the pregnant leach solution was sent to solvent extraction stage with D2EHPA for the separation of zinc from the other impurities such as Ca, Mg and Fe. The best solvent extraction conditions were determined to be a concentration of 20% D2EHPA, temperature of 25 degrees C, contact time of 10 min and phase ratio of unity. Under the optimum conditions, 98.3% Zn was extracted into the organic phase in a single contact at a pH of 3.6, along with a significant amount of Ca (79%) and minor amounts of Mg (14.7%) and Fe (8.6%). At pH 4.5, the loaded organic solution was carried to the scrubbing stage, where 20 g/L zinc solution was used to remove approximately 91% Ca and 34% Mg from the organic solution. At a pH of 0.25, the loaded organic solution was almost completely stripped of zinc and 27% of calcium in two steps.Article Citation - WoS: 22Citation - Scopus: 27Production of Alpha-Alumina from Black Aluminum Dross Using NaOh Leaching Followed by Calcination(Springer, 2020-07-27) Turk, Murat; Altiner, Mahmut; Top, Soner; Karaca, Serkan; Bouchekrit, ChafiaThe aim of this work is to produce alpha-alumina particles from aluminum (Al) dross via leaching-precipitation-calcination processes. In the leaching test, the effects of parameters such as the temperature, NaOH concentration, and time were investigated based on the Taguchi approach. In addition, the effect of the particle size on the Al extraction rate was determined. The Al extraction rate ranged from 78.64% to 93.11% and from 78.35% to 91.99% for ground dross and as-received dross, respectively. In the precipitation test, the pH of the leachate solution was decreased using HCl to remove Al ions as Al hydroxide precipitate. The precipitate was calcined at 1000 degrees C to 1200 degrees C for 270 min. The morphological and polymorphic properties of the products were characterized by scanning electron microscopy, atomic force microscopy, and x-ray diffraction analysis. The experimental findings indicated that the calcination temperature and stabilization time were critical for producing alpha-alumina particles rather than other polymorphs.Article Citation - WoS: 2Citation - Scopus: 3Characterization of Nickel in Chromite Beneficiation Tailings by Mineral Liberation Analysis and Its Recovery by H2SO4 Leaching Followed by Oxalic Acid Precipitation(Springer, 2023-11-13) Altiner, Mahmut; Ibrahim, Ahmedaljaali Ibrahim Idrees; Kursunoglu, Sait; Top, Soner; Bayat, OktayThis study investigated the recovery of nickel from tailings (0.2% Ni) obtained in a chromite beneficiation plant using H2SO4 leaching followed by oxalic acid precipitation. The tailings were characterized using mineral liberation analysis. Ni was found as Fe-Ni, Fe-Ni-Co sulfide minerals, which were encapsulated in serpentine, olivine, pyroxene and clinochlore. Liberated fine chromite minerals benefited from magnetic separation followed by Falcon concentrator. A chromite product with a grade > 37% was obtained. The effect of leaching conditions including acid concentration, temperature, time and solid-to-liquid ratio on the leaching behavior of Ni was investigated based on the Taguchi approach. It was possible to extract Ni with a rate of > 98% from the tailings using the following conditions: H2SO4 concentration of 3 M, solid-to-liquid ratio of 1:20 and ambient temperature for 2 h. Finally, Ni was precipitated as an oxalate form with a precipitation rate of 72%. It is believed that implementing additional purification methods like solvent extraction may be essential to obtain a high-purity nickel product from the leach solution of oxalate precipitate. Experimental results indicate that the tailings used in this study are a good alternative as Ni resource in the near future.Article Citation - WoS: 4Citation - Scopus: 4Beneficiation of Low-Grade Iron Ore Using a Dry-Roll Magnetic Separator and Its Modeling via Artificial Neural Network(Springer, 2025-02-24) Fariss, Abdourahman Hassan Brahim; Ibrahim, Ahmedaljaali Ibrahim Idrees; Ozdemir, Ali Can; Top, Soner; Kursunoglu, Sait; Altiner, MahmutThe beneficiation of low-grade iron ore (39.5% Fe-(T) grade) using a dry-roll magnetic separator was investigated. The ore was characterized using Mineral Liberation Analysis (MLA). It was determined that the ore was composed of iron oxide (goethite and hematite), quartz, chlorite, muscovite, plagioclase, and other minerals. The effect of particle size (PS, - 1 + 0.500 mm, - 0.500 + 0.300 mm, and - 0.300 + 0.125 mm), splitter position (SP, 43 degrees and 58 degrees), cleaning stage (CS, 1 and 2), conveyor speed (CoS, 3, 5, and 7 Hz), magnetic field strength (MFS, 0.2 T and 0.4 T) on the recovery of the magnetic product was investigated. Experimental results show that the product (- 1 + 0.500 mm) with the Fe-(T) grade of 67.67% can be obtained, but its recovery was not at an acceptable value (< 30%). Furthermore, the Fe-(T) grade of the product (- 0.500 + 0.300 and - 0.300 + 0.125 mm) could not reach satisfactory levels<bold>.</bold> The artificial neural network (ANN) method was conducted on the results of experimental studies. Three different training algorithms were employed for modeling, and their performance was assessed using statistical evaluation criteria. The results demonstrate that Bayesian Regularization (BR) algorithm exhibited better performance compared to others in predicting both Fe(T) grade and recovery rate during the testing phase. These findings support the notion that ANN algorithms can be a powerful modeling and prediction tool in the field of mineral processing.Article Citation - WoS: 8Citation - Scopus: 12Assessment of Rock Aggregate Quality Through the Analytic Hierarchy Process (AHP)(Springer, 2020-05-22) Koken, Ekin; Top, Soner; Ozarslan, AhmetThe present study aimed to assess rock aggregate quality through the Analytic Hierarchy Process (AHP). In the context of the AHP analyses, four rock types (i.e., andesite, basalt, granodiorite, and gabbro), five evaluation criteria, and several technical requirements/suggestions for coarse aggregates related to bituminous paving mixtures were considered. In order to set over the evaluation criteria, detailed laboratory studies were conducted. For this purpose, various mineralogical, physical, and mechanical aggregate properties were determined for each rock type concerning their weathering grades. As a result of the laboratory studies, it was determined that the rock weathering processes have substantial negative impacts on the rock aggregate properties considered in this study. The AHP analysis results indicated that that different rock types have several advantages concerning various evaluation criteria. Based on the general evaluation point (EP) of the rocks, the gabbros were found to have the highest rock aggregate quality (EP = 0.393). In contrast, the andesites had the lowest quality (EP = 0.069). Besides, the basalts (EP = 0.271) and granodiorites (EP = 0.267) presented approximately the same quality for their use in bituminous pavement mixtures. It was also demonstrated that the AHP, with its specific methodology, can be utilized to represent different environmental and mechanical conditions by changing the relative weight of the evaluation criteria. In this way, the pros and cons of different rock types could be revealed quantitatively, which enables related engineers to select proper rock types for their use under different environmental and mechanical conditions. From this point of view, the present study could be declared a case study noted for combining theoretical and practical approaches on bituminous paving mixtures as a sign of rock aggregate quality.