Scopus İndeksli Yayınlar Koleksiyonu

Permanent URI for this collectionhttps://hdl.handle.net/20.500.12573/395

Browse

Filters

2018 - 201922020 - 20253

Settings

Author: search.filters.author.Onses, M. SerdarWoS Q: search.filters.wosQuartile.Q2

Search Results

Now showing 1 - 5 of 5
  • Article
    Enhanced Photoluminescence via Plasmonic Gold Nanoparticles and Improved Stability of Perovskite Nanocrystals in Macroporous (Polydimethylsiloxane) PDMS Matrices
    (Springer, 2025-10-09) Ocal, Sema Karabel; Tiras, Kevser Sahin; Onses, M. Serdar; Mutlugun, Evren
    In this work, we report a simple and cost-effective method for improving both the environmental stability and photoluminescence quantum efficiency (PLQY) of perovskite nanocrystals (PNCs). Through their embedding in a specially designed macroporous polydimethylsiloxane (MPDMS) matrix and incorporation of plasmonic gold nanoparticles (Au NPs), remarkable improvements are achieved. The resulting MPDMS@PNC composites are seen to retain near-unity quantum efficiency even after 24-h immersion in water and are observed to retain over 85% of the original efficiency even at 75 degrees C, displaying excellent thermal stability. More interestingly, by incorporating Au NPs and subjecting the material to mechanical pressure, the lifetime of the PNCs gets further increased. This is due to the more intimate spatial arrangement of Au NPs in the porous matrix, enhancing localized surface plasmon resonance (LSPR) coupling and thereby enhancing the photoluminescence (PL) of the PNCs. In general, this approach offers a scalable and robust route to designing stable, high-performance perovskite-based materials for next-generation optoelectronic applications.
  • Article
    Citation - WoS: 16
    Citation - Scopus: 17
    Solid-State Encapsulation and Color Tuning in Films of Cesium Lead Halide Perovskite Nanocrystals for White Light Generation
    (Amer Chemical Soc, 2019-01-30) Torun, Ilker; Altintas, Yemliha; Yazici, Ahmet Faruk; Mutlugun, Evren; Onses, M. Serdar
    Perovskite nanocrystals (PNCs) are highly demanding nanomaterials for solid-state lighting applications. A challenge for their exploitation in practical applications is the insufficient ambient and water stability associated with their ionic nature. Here we report a novel route for solid-state encapsulation of films of perovskite nanocrystals (PNCs) through vapor-phase deposition of a thin and hydrophobic layer of fluoroalkyltrichlorosilanes (FAS). High quality nanoscale crystals of CsPbBr3 were synthesized with well established colloidal methods and coated on solid substrates. The films of PNCs were then subjected to vapor of FAS for short durations of time (<60 s) in ambient atmosphere, resulting in deposition of a thin (<20 nm) hydrophobic layer. Besides providing a barrier for water and humidity, the vapor-phase deposition of FAS was accompanied by the blue shift of the emission wavelength of the PNCs. The color shift results from the partial exchange of Br with Cl anions, which emerge during the self-hydrolysis of the silane molecules. Throughout this process, we demonstrate the enhanced water stability of the films of PNCs and fine tunability of the wavelength in films from 516 nm to 488 nm. The fabrication of a white-light-emitting diode and tunability of the color coordinates with the duration of the FAS deposition were demonstrated. The rapid, scalable, and inexpensive solid-state encapsulation approach shows great promise for films of halide perovskites.
  • Article
    Citation - WoS: 9
    Citation - Scopus: 11
    Natural Wax-Stabilized Perovskite Nanocrystals as Pen-On Inks and Doughs
    (Amer Chemical Soc, 2022-04-19) Ocal, Sema Karabel; Kiremitler, N. Burak; Yazici, Ahmet Faruk; Celik, Nusret; Mutlugun, Evren; Onses, M. Serdar; Karabel Ocal, Sema
    Perovskite nanocrystals (PNCs) are emerging luminescent materials for a wide range of technological applications. The broad adaptation of PNCs will be greatly improved by addressing their intrinsically low stability and developing processes for their assembly into 2D and 3D structures using facile approaches. Inspired by the mechanism of natural protection of leaves, this paper proposes natural carnauba wax (CW) as an encapsulation material for PNCs. The synthesis of PNCs is performed in the presence of CW, which is derived from the leaves of Copernicia prunifera palm. CW acts as a solvent and replaces the commonly used octadecene in the preparation of PNCs. The facile synthesis in CW results in PNCs with greatly improved thermal, water, and air stability. Furthermore, the thermal and mechanical properties make PNC-Wax a highly suitable solid ink for versatile processing of these materials into 2D and 3D architectures. PNC-Wax can be printed via a pen-on-paper approach by heating at modest temperatures. The rapid plasticization of PNC-Wax by mechanical agitation enables hand-shaping of the material in a manner similar to playdoughs, which would possibly enable the versatile use of this material for various applications.
  • Article
    Citation - WoS: 15
    Citation - Scopus: 18
    FRET Enabled Light Harvesting within Quantum Dot Loaded Nanofibers
    (IOP Publishing Ltd, 2018-01-24) Altintas, Yemliha; Kiremitler, Nuri Burak; Genc, Sinan; Onses, M. Serdar; Mutlugun, Evren
    The spatial control of the nano-emitters in novel light harvesting platforms offers great potential for the manipulation of the excitonic interaction amongst the donor-acceptor pairs of energy transferring agents. In this work, we report colloidal quantum dot loaded electrospun nanofibers as a light harvesting platform to study the excitonic interaction among them. The donor emission lifetime modified from 12.46 ns to 7.45 ns with the change in the ratio of green and red quantum dots in the nanofiber, as a result of confining acceptor quantum dots in close proximity. The spectrally narrow emitter luminescent nanofiber platforms have further been investigated for their potential of white light generation. The hybrid platform of blue LED integrated electrospun nanofibers has been shown to demonstrate a correlated color temperature of 3632.5 K, luminous efficacy of optical radiation value of 307.7 lm/W-opt along with color rendering index value of 60.
  • Article
    Citation - WoS: 37
    Citation - Scopus: 36
    Flexible Electrodes Composed of Flower-Like MoS2 and MXene for Supercapacitor Applications
    (Pergamon-Elsevier Science Ltd, 2024) Hayat, Hilal Pecenek; Dokan, Fatma Kilic; Onses, M. Serdar; Yilmaz, Erkan; Duran, Ali; Sahmetlioglu, Ertugrul
    Flexible supercapacitors with high charge storage ability are needed for emerging applications in wearable electronics. Here, we introduce a novel flexible supercapacitor electrode by incorporating flower-like MoS2 into MXene via a hydrothermal technique. We mostly focused on the structural design for electrode configuration to enhance the charge storage mechanism. Three different electrodes composed of MoS2, MXene, and MoS2@MXene were fabricated via a versatile drop-casting and drying method. There are unique advantages of incorporating MoS2 with MXene such as the fast electron transfer, hydrophilicity of the interface, and structural stability. The MoS2@MXene // MXene flexible asymmetric supercapacitor device offered a high energy density of 1.21 W h /kg and a power density of 54.45 W /kg. Moreover, the asymmetric device exhibits nearly identical electrochemical behavior following 100 bending cycles at different angles. The high electrochemical activity of MoS2 and MXene and good interaction are ascribed to the superior electrochemical performance of the composite material. Furthermore, this research could guide the development of flexible, high-performance, and low-cost electrodes which will be useful in wearable electronics.