Scopus İndeksli Yayınlar Koleksiyonu
Permanent URI for this collectionhttps://hdl.handle.net/20.500.12573/395
Browse
5 results
Search Results
Article Citation - WoS: 2Citation - Scopus: 1Toward Sustainable Optoelectronics: Solution-Processed Quantum Dot Photodetector Fabrication Using a Surgical Blade(SPIE - Society of Photo-Optical Instrumentation Engineers, 2023-02-13) Savas, Muzeyyen; Yazici, Ahmet Faruk; Arslan, Aysenur; Mutluguen, Evren; Erdem, Talha; Yazlcl, Ahmet Faruk; Mutlugün, EvrenFabrication of optoelectronic devices relies on expensive, energy-consuming conventional tools including chemical vapor deposition, lithography, and metal evaporation. Furthermore, the films used in these devices are usually deposited at elevated temperatures (> 300 degrees C) and under high vacuum, which necessitate further restrictions on the device fabrication. Developing an alternative technology would contribute to the efforts on achieving a sustainable optoelectronics technology. Keeping this in our focus, here we present a simple technique to fabricate visible photodetectors (PDs). These fully solution-processed and transparent metal-semiconductor-metal (MSM) PDs employ silver nanowires (Ag NW) as the transparent electrodes replacing the indium-tin-oxide (ITO) commonly used in optoelectronic devices. By repeatedly spin coating Ag NWs on a glass substrate followed by the coating of zinc oxide nanoparticles, we obtained a highly conductive transparent electrode reaching a sheet resistance of 95 omega/? as measured by the four-probe method. Optical spectroscopy revealed that the transmittance of the Ag NW-ZnO films was 84% at 450 nm while the transmittance of the ITO films was 90% at the same wavelength. Following the formation of the conductive film, we scratched it using a heated surgical blade to open a gap. The scanning electron microscope images indicate that a gap of similar to 30 mu m is opened forming an insulating line. As the active layer, we drop-casted red-emitting CdSe/ZnS core-shell quantum dots (QDs) onto this gap to form a MSM PD. These visible QD-based PDs exhibited responsivities and detectivities up to 8.5 mA/W and 0.95 x 109 Jones, respectively at a bias voltage of 5 V and wavelength of 650 nm. These proof-of-concept PDs show that the environmentally friendly, low-cost, and energy-saving technique presented here can be an alternative to conventional, high-cost, and energy-hungry techniques while fabricating photoconductive devices.Conference Object Citation - WoS: 1Citation - Scopus: 1The Effect of Fourth Color Component on Enhancement of Color Gamut(Institute of Electrical and Electronics Engineers Inc., 2017-10) Genc, Sinan; Uguz, Mustafa; Mutlugün, EvrenIn this work, we simulate and analyse the peak emission wavelength and full-width-at-half-maximum (FWHM) parameters of nano emitters using four-color mixing approach to provide a tetragonal area as large as possible in CIE-1931, reaching over 160% NTSC area using emitters having 30nm FWHM. © 2018 Elsevier B.V., All rights reserved.Article Citation - Scopus: 151Highly Flexible, Electrically Driven, Top-Emitting, Quantum Dot Light-Emitting Stickers(American Chemical Society, 2014-07-18) Yang, Xuyong; Mutlugün, Evren; Dang, Cuong H.; Dev, Kapil; Gao, Yuan; Tan, Swee Tiam; Volkan Demir, Hilmi Volkan; Demir, Hilmi VolkanFlexible information displays are key elements in future optoelectronic devices. Quantum dot light-emitting diodes (QLEDs) with advantages in color quality, stability, and cost-effectiveness are emerging as a candidate for single-material, full color light sources. Despite the recent advances in QLED technology, making high-performance flexible QLEDs still remains a big challenge due to limited choices of proper materials and device architectures as well as poor mechanical stability. Here, we show highly efficient, large-area QLED tapes emitting in red, green, and blue (RGB) colors with top-emitting design and polyimide tapes as flexible substrates. The brightness and quantum efficiency are 20 000 cd/m2 and 4.03%, respectively, the highest values reported for flexible QLEDs. Besides the excellent electroluminescence performance, these QLED films are highly flexible and mechanically robust to use as electrically driven light-emitting stickers by placing on or removing from any curved surface, facilitating versatile LED applications. Our QLED tapes present a step toward practical quantum dot based platforms for high-performance flexible displays and solid-state lighting. © 2014 American Chemical Society. © 2021 Elsevier B.V., All rights reserved.Conference Object Citation - Scopus: 1Color Simulation and Demonstration of Perovskite Nanocrystal Filters for Wide Color Gamut Displays(Institute of Electrical and Electronics Engineers Inc., 2018-09) Genc, Sinan; Yazici, Ahmet F.; Beskazak, Emre; Uran, Can; Mutlugün, EvrenIn this study, we define spectral parameters of perovskite nanocrystals to improve LCD color gamut, replacing color filters (CFs) with perovskite based subpixels. The optimization of the CFs has been enhanced 15.8% (98.43% of Rec.2020) in simulation and 13.8% experimentally, with 97.37% color gamut coverage. © 2019 Elsevier B.V., All rights reserved.Conference Object Arrays of Multi-Color Emitting Cesium Lead Halide Perovskite Nanocrystals and Efficient White Light Generation by Tailored Anion Exchange Reactions and Electrohydrodynamic Jet Printing(Optica Publishing Group (Formerly OSA), 2018) Altıntas, Yemliha; Torun, Ilker; Yazici, Ahmet F.; Beskazak, Emre; Onses, Mustafa Serdar; Mutlugün, EvrenWe employ highly efficient and narrow band emitter Cesium-lead-halide perovskite nanocrystals, optimized by the anion exchange method, for efficient white light generation by patterning multiple lines of different colors via proposed electrohydrodynamic jet printing. © 2023 Elsevier B.V., All rights reserved.