Scopus İndeksli Yayınlar Koleksiyonu
Permanent URI for this collectionhttps://hdl.handle.net/20.500.12573/395
Browse
3 results
Search Results
Article Citation - WoS: 2Citation - Scopus: 1Toward Sustainable Optoelectronics: Solution-Processed Quantum Dot Photodetector Fabrication Using a Surgical Blade(SPIE - Society of Photo-Optical Instrumentation Engineers, 2023-02-13) Savas, Muzeyyen; Yazici, Ahmet Faruk; Arslan, Aysenur; Mutluguen, Evren; Erdem, Talha; Yazlcl, Ahmet Faruk; Mutlugün, EvrenFabrication of optoelectronic devices relies on expensive, energy-consuming conventional tools including chemical vapor deposition, lithography, and metal evaporation. Furthermore, the films used in these devices are usually deposited at elevated temperatures (> 300 degrees C) and under high vacuum, which necessitate further restrictions on the device fabrication. Developing an alternative technology would contribute to the efforts on achieving a sustainable optoelectronics technology. Keeping this in our focus, here we present a simple technique to fabricate visible photodetectors (PDs). These fully solution-processed and transparent metal-semiconductor-metal (MSM) PDs employ silver nanowires (Ag NW) as the transparent electrodes replacing the indium-tin-oxide (ITO) commonly used in optoelectronic devices. By repeatedly spin coating Ag NWs on a glass substrate followed by the coating of zinc oxide nanoparticles, we obtained a highly conductive transparent electrode reaching a sheet resistance of 95 omega/? as measured by the four-probe method. Optical spectroscopy revealed that the transmittance of the Ag NW-ZnO films was 84% at 450 nm while the transmittance of the ITO films was 90% at the same wavelength. Following the formation of the conductive film, we scratched it using a heated surgical blade to open a gap. The scanning electron microscope images indicate that a gap of similar to 30 mu m is opened forming an insulating line. As the active layer, we drop-casted red-emitting CdSe/ZnS core-shell quantum dots (QDs) onto this gap to form a MSM PD. These visible QD-based PDs exhibited responsivities and detectivities up to 8.5 mA/W and 0.95 x 109 Jones, respectively at a bias voltage of 5 V and wavelength of 650 nm. These proof-of-concept PDs show that the environmentally friendly, low-cost, and energy-saving technique presented here can be an alternative to conventional, high-cost, and energy-hungry techniques while fabricating photoconductive devices.Conference Object Citation - WoS: 1Citation - Scopus: 1The Effect of Fourth Color Component on Enhancement of Color Gamut(Institute of Electrical and Electronics Engineers Inc., 2017-10) Genc, Sinan; Uguz, Mustafa; Mutlugün, EvrenIn this work, we simulate and analyse the peak emission wavelength and full-width-at-half-maximum (FWHM) parameters of nano emitters using four-color mixing approach to provide a tetragonal area as large as possible in CIE-1931, reaching over 160% NTSC area using emitters having 30nm FWHM. © 2018 Elsevier B.V., All rights reserved.Conference Object Arrays of Multi-Color Emitting Cesium Lead Halide Perovskite Nanocrystals and Efficient White Light Generation by Tailored Anion Exchange Reactions and Electrohydrodynamic Jet Printing(Optica Publishing Group (Formerly OSA), 2018) Altıntas, Yemliha; Torun, Ilker; Yazici, Ahmet F.; Beskazak, Emre; Onses, Mustafa Serdar; Mutlugün, EvrenWe employ highly efficient and narrow band emitter Cesium-lead-halide perovskite nanocrystals, optimized by the anion exchange method, for efficient white light generation by patterning multiple lines of different colors via proposed electrohydrodynamic jet printing. © 2023 Elsevier B.V., All rights reserved.