Scopus İndeksli Yayınlar Koleksiyonu
Permanent URI for this collectionhttps://hdl.handle.net/20.500.12573/395
Browse
Search Results
Article Citation - WoS: 5Citation - Scopus: 5Selective Leaching of a Mixed Nickel-Cobalt Hydroxide Precipitate in Sulphuric Acid Solution With Potassium Permanganate as Oxidant(Taylor & Francis inc, 2020-10-12) Hussaini, Shokrullah; Ichlas, Zela Tanlega; Top, Soner; Kursunoglu, Sait; Kaya, MuammerSelective leaching of a mixed nickel-cobalt hydroxide precipitate was investigated using potassium permanganate as oxidant in sulfuric acid solution. 94.9% Ni, 50% Co and 0.6% Mn were dissolved under the following conditions: sulfuric acid concentration of 0.75 M, potassium permanganate of 5 g/L, temperature of 30 degrees C, leaching duration of 60 min, solid-to-liquid ratio of 1/10, and stirring speed of 400rpm. The pregnant leach solution was subjected to a solvent extraction process. 98% Co and 99% Mn were extracted at pH 4.84 with 30% (v/v) Cyanex 272, leaving essentially all nickel in the raffinate. Based on the experimental results, a flowsheet is proposed.Article Citation - WoS: 20Citation - Scopus: 22Effects of Leaching Parameters on the Dissolution of Nickel, Cobalt, Manganese and Iron from Caldag Lateritic Nickel Ore in Hydrochloric Acid Solution(Taylor & Francis Ltd, 2020-06-18) Top, Soner; Kursunoglu, Sait; Ichlas, Zela TanlegaThe effects of leaching parameters on the metal dissolutions from Caldag laterite ore using hydrochloric acid at atmospheric pressure were investigated. The following leaching parameters were examined to understand their effects on the dissolution of the metals: hydrochloric acid concentration, solid/liquid ratio, particle size, leaching temperature and time. Extractions of 95.8%Ni, 94.5%Co and 94.3%Mn into the leach solution were obtained along with a substantial amount of iron (81.5%) under the following conditions: 3.0 M HCl concentration, 90 degrees C leaching temperature, 8 h leaching time, 1/5 solid/liquid ratio and -0.053 mm particle size. The hydrochloric acid consumption under these optimum conditions was found to be 543 kg t(-1)ore. The results indicated that hydrochloric acid concentration and leaching temperature were the most important parameters affecting metal dissolutions. It was found that the dissolution of nickel did not exhibit a good linear correlation to that of manganese, which suggested that considerable amounts of nickel were not hosted in asbolane phase but also in other mineral phases such as goethite, haematite and clays. It was, however, found that most of the cobalt appeared to be hosted in asbolane. The semi-quantitative mineral analyses revealed that mineral dissolution order was as follows: calcite > goethite > haematite > lizardite >= chlorite-serpentine > asbolane > albite > kaolinite.