Scopus İndeksli Yayınlar Koleksiyonu
Permanent URI for this collectionhttps://hdl.handle.net/20.500.12573/395
Browse
3 results
Search Results
Article Citation - WoS: 14Citation - Scopus: 13Production of Mixed Rare Earth Oxide Powder From a Thorium Containing Complex Bastnasite Ore(Elsevier, 2021-02) Kursunoglu, Sait; Hussaini, Shokrullah; Top, Soner; Ichlas, Zela Tanlega; Gokcen, Hasan Serkan; Ozsarac, Safak; Kaya, MuammerThe production of mixed rare earth oxide powder from a thorium containing bastnasite ore by sulfuric acid bake water leaching followed by precipitation with oxalic acid and thermal decomposition of the oxalates was investigated. The sulfuric acid baking was performed at 250 degrees C and the optimum baking time was found to be 3 h. Using deionized water as lixiviant, 92.6% La, 86.8% Ce, 86.9% Pr, 82.3% Nd, 95.4% Th and 31% Y were dissolved from the baked ore at 25 degrees C after 30 min of leaching. The effect of solid-to-liquid ratio on the dissolution of the rare earth elements and thorium shows that when the solid ratio in the water increased from 1:10 to 1:3, the dissolution percentage decreased. The final mixed rare earth oxide powder contained 88.54% REO and 6% ThO20 together with small amounts of other impurities. The SEM mapping results revealed that the produced REO has an irregular crystal shape. Based on the experimental results obtained from the current study, a flowsheet was proposed for the production of mixed rare earth oxide powder from a specific complex bastnasite ore. (C) 2020 Elsevier B.V. All rights reserved.Article Citation - WoS: 14Citation - Scopus: 18Pb-Zn Recovery From a Malic Leach Solution of a Carbonate Type Ore Flotation Tailing by Precipitation and Solvent Extraction(Elsevier, 2021-10) Hussaini, Shokrullah; Tita, Angela Manka; Kursunoglu, Sait; Top, Soner; Ichlas, Zela Tanlega; Kar, Umut; Kaya, MuammerThe recovery of zinc and lead from a malic leach solution of a carbonate type ore flotation tailing by precipitation with sulfuric acid followed by solvent extraction using di(2-ethylhexyl)phosphoric acid (D2EHPA) as extractant was investigated. The separation of lead via precipitation was essentially complete from the malic acid leach solution by adding sulphuric acid to reach a pH of 0.25 at 25 degrees C. The precipitate product was identified by XRD as anglesite (PbSO4). The pregnant leach solution after lead precipitation was then subjected to solvent extraction using D2EHPA. The optimum solvent extraction conditions were determined as 10% D2EHPA concentration, 25 degrees C temperature, 10 min contact time and phase ratio of unity. Under these conditions, 99.3% of zinc was extracted into the organic phase at a pH of 4.2 in a single contact alongside a substantial amount of Ca (76.6%), and minor amounts of Fe (19.2%) and Mg (18%). Complete stripping of zinc and calcium from the loaded organic solution along with 47.8% of Mg was achieved at a pH 0.5 under room temperature. No iron stripping was observed from the loaded organic. The zinc content in the loaded strip solution could be enriched and then sent to the electrowinning (EW) stage. It is noted that the calcium and magnesium impurities in the loaded strip solution had no adverse effect on the zinc EW process. Based on the experimental results, a flowsheet was proposed for the recovery of Pb and Zn from the malic acid leach solution. With the proposed precipitation and solvent extraction process, two different material streams are produced.Article Citation - WoS: 143Citation - Scopus: 161Critical Review on Secondary Zinc Resources and Their Recycling Technologies(Elsevier, 2020-08) Kaya, Muammer; Hussaini, Shokrullah; Kursunoglu, SaitIn a race to save the earth of its rapidly depleting natural resources, the use of Secondary Raw Materials (SMRs) as alternative replacements in several processes is currently intensively pursued. The valorization of SMRs is consistent with the sustainable circular economy, where resource efficiency is maximized for the benefit of both the economy and green environment. In line with this mandate, this article focuses on investigating recent studies on secondary zinc (Zn) resources and describing state-of-art Zn recycling technologies. Globally, some of the main Zn-containing secondary raw materials are mine/concentrator/smelter tailings, wastes, slags, scraps, dust, etc. Although the pyrometallurgical process has been dominant in the secondary metal recycling processes, there has been growing interest and pressure to achieve sustainable and greener recycling methods to remediate the environmental problems caused by emissions of toxic heavy metals and sulfur oxides in the traditional smelting process. In the last decades, many sustainable and environmentally friendly novel hydrometallurgical processes for Zn extraction were developed to overcome tougher legislation and meet cost competitiveness. Secondary Zn recycling focuses on the development of selective Zn-rich but Pb, Fe, As-lean recovery processes.