Scopus İndeksli Yayınlar Koleksiyonu
Permanent URI for this collectionhttps://hdl.handle.net/20.500.12573/395
Browse
9 results
Search Results
Article Citation - WoS: 6Citation - Scopus: 10Traffic-Adaptive Inter Wavelength Load Balancing for TWDM PON(IEEE-Inst Electrical Electronics Engineers Inc, 2020-02) Memon, Kamran Ali; Zhang, Qi; Butt, Rizwan Aslam; Mohammadani, Khalid Hussain; Faheem, Muhammad; ul Ain, Noor; Xin, XiangjunThis study presents a dynamic inter wavelength migration scheme for the optical network units (ONUs) employing linear regression machine learning method to equalize the traffic volume on all the wavelengths in time and wavelength division multiplexed passive optical network (TWDM PON). The proposed traffic-adaptive wavelength and bandwidth assignment (TA-WBA) scheme not only decreases upstream traffic delays but also offers 2.3% and 30% less delay on the wavelengths balancing the excessive load and 7% less upstream bandwidth waste, when evaluated against other load-balancing scheme.Article Citation - WoS: 6Citation - Scopus: 6Sleep-Aware Wavelength and Bandwidth Assignment Scheme for TWDM PON(Springer, 2021-06) Butt, Rizwan Aslam; Faheem, Muhammad; Ashraf, M. Waqar; Arfeen, Asad; Memon, Kamran Ali; Khawaja, AttaullahThe energy efficiency and delay performance of PON are two inversely related phenomena. Higher sleep time of the Optical Network Units (ONUs) results in higher upstream (US) delays due to increased traffic queues during the ONU Asleep state. Although an efficient dynamic bandwidth and wavelength assignment (DWBA) scheme can decrease US delays by minimizing the bandwidth waste and improving the fairness of bandwidth distribution among the ONUs. However, the conventional DWBA schemes are not designed to work with cyclic sleep mode (CSM) and they keep on assigning bandwidth to ONUs even if the ONU is in Asleep state leading to wastage of bandwidth and degraded CSM performance. Therefore, in this work a sleep aware DWBA scheme for TWDM PON is presented to coordinate with CSM mode. It only assign bandwidth to Active ONUs during the guaranteed phase, surplus phase and excess phase allocation phases which minimizes the bandwidth waste and the bandwidth lost at the ONU end. The wavelength switching process is also improved by only considering the Active state ONUs to balance the traffic load on all the wavelengths. The simulation results support our claim as the SA-DWBA scheme on average achieves DWBA schemes due to up to 50% to 65% higher energy savings compared to other due to longer ONU Asleep times. However, the increased upstream delays of all the traffic classes in SA-DWBA scheme remain within the set delay limit of 50 ms.Article Citation - WoS: 31Citation - Scopus: 41QoSRP: A Cross-Layer QoS Channel-Aware Routing Protocol for the Internet of Underwater Acoustic Sensor Networks(MDPI, 2019-11-02) Faheem, Muhammad; Butt, Rizwan Aslam; Raza, Basit; Alquhayz, Hani; Ashraf, Muhammad Waqar; Shah, Syed Bilal; Gungor, Vehbi CagriQuality of service (QoS)-aware data gathering in static-channel based underwater wireless sensor networks (UWSNs) is severely limited due to location and time-dependent acoustic channel communication characteristics. This paper proposes a novel cross-layer QoS-aware multichannel routing protocol called QoSRP for the internet of UWSNs-based time-critical marine monitoring applications. The proposed QoSRP scheme considers the unique characteristics of the acoustic communication in highly dynamic network topology during gathering and relaying events data towards the sink. The proposed QoSRP scheme during the time-critical events data-gathering process employs three basic mechanisms, namely underwater channel detection (UWCD), underwater channel assignment (UWCA) and underwater packets forwarding (UWPF). The UWCD mechanism finds the vacant channels with a high probability of detection and low probability of missed detection and false alarms. The UWCA scheme assigns high data rates channels to acoustic sensor nodes (ASNs) with longer idle probability in a robust manner. Lastly, the UWPF mechanism during conveying information avoids congestion, data path loops and balances the data traffic load in UWSNs. The QoSRP scheme is validated through extensive simulations conducted by NS2 and AquaSim 2.0 in underwater environments (UWEs). The simulation results reveal that the QoSRP protocol performs better compared to existing routing schemes in UWSNs.Article Citation - WoS: 54Citation - Scopus: 68FFRP: Dynamic Firefly Mating Optimization Inspired Energy Efficient Routing Protocol for Internet of Underwater Wireless Sensor Networks(IEEE-Inst Electrical Electronics Engineers Inc, 2020) Faheem, Muhammad; Butt, Rizwan Aslam; Raza, Basit; Alquhayz, Hani; Ashraf, Muhammad Waqar; Raza, Saleem; Bin Ngadi, Md Asri; Ngadi, Md. Asri BinEnergy-efficient and reliable data gathering using highly stable links in underwater wireless sensor networks (UWSNs) is challenging because of time and location-dependent communication characteristics of the acoustic channel. In this paper, we propose a novel dynamic firefly mating optimization inspired routing scheme called FFRP for the internet of UWSNs-based events monitoring applications. The proposed FFRP scheme during the events data gathering employs a self-learning based dynamic firefly mating optimization intelligence to find the highly stable and reliable routing paths to route packets around connectivity voids and shadow zones in UWSNs. The proposed scheme during conveying information minimizes the high energy consumption and latency issues by balancing the data traffic load evenly in a large-scale network. In additions, the data transmission over highly stable links between acoustic nodes increases the overall packets delivery ratio and network throughput in UWSNs. Several simulation experiments are carried out to verify the effectiveness of the proposed scheme against the existing schemes through NS2 and AquaSim 2.0 in UWSNs. The experimental outcomes show the better performance of the developed protocol in terms of high packets delivery ratio (PDR) and network throughput (NT) with low latency and energy consumption (EC) compared to existing routing protocols in UWSNs.Article Citation - WoS: 4Citation - Scopus: 6Enhanced Energy Savings With Adaptive Watchful Sleep Mode for Next Generation Passive Optical Network(MDPI, 2022-02-23) Butt, Rizwan Aslam; Akhunzada, Adnan; Faheem, Muhammad; Raza, BasitA single watchful sleep mode (WSM) combines the features of both cyclic sleep mode (CSM) and cyclic doze mode (CDM) in a single process by periodically turning ON and OFF the optical receiver (RX) of the optical network terminal (ONT) in a symmetric manner. This results in almost the same energy savings for the ONTs as achieved by the CSM process while significantly reducing the upstream delays. However, in this study we argue that the periodic ON and OFF periods of the ONT RX is not an energy efficient approach, as it reduces the ONT Asleep (AS) state time. Instead, this study proposes an adaptive watchful sleep mode (AWSM) in which the RX ON time of ONT is minimized during ONT Watch state by choosing it according to the length of the traffic queue of the type 1 (T1) traffic class. The performance of AWSM is compared with standard WSM and CSM schemes. The investigation reveals that by minimizing the RX ON time, the AWSM scheme achieves up to 71% average energy saving per ONT at low traffic loads. The comparative study results show that the ONT energy savings achieved by AWSM are 9% higher than the symmetric WSM with almost the same delay and delay variance performance.Article Citation - WoS: 31Citation - Scopus: 40Disaster-Resilient Optical Network Survivability: A Comprehensive Survey(MDPI, 2018-10-12) Ashraf, Muhammad Waqar; Idrus, Sevia M.; Iqbal, Farabi; Butt, Rizwan Aslam; Faheem, MuhammadNetwork survivability endeavors to ensure the uninterrupted provisioning of services by the network operators in case of a disaster event. Studies and news reports show that network failures caused by physical attacks and natural disasters have significant impacts on the optical networks. Such network failures may lead to a section of a network to cease to function, resulting in non-availability of services and may increase the congestion within the rest of the network. Therefore, fault tolerant and disaster-resilient optical networks have grasped the attention of the research community and have been a critical concern in network studies during the last decade. Several studies on protection and restoration techniques have been conducted to address the network component failures. This study reviews related previous research studies to critically discuss the issues regarding protection, restoration, cascading failures, disaster-based failures, and congestion-aware routing. We have also focused on the problem of simultaneous cascading failures (which may disturb the data traffic within a layer or disrupt the services at upper layers) along with their mitigating techniques, and disaster-aware network survivability. Since traffic floods and network congestion are pertinent problems, they have therefore been discussed in a separate section. In the end, we have highlighted some open issues in the disaster-resilient network survivability for research challenges and discussed them along with their possible solutions.Data Paper Citation - WoS: 34Citation - Scopus: 41Big Data Acquired by Internet of Things-Enabled Industrial Multichannel Wireless Sensors Networks for Active Monitoring and Control in the Smart Grid Industry 4.0(Elsevier, 2021-04) Faheem, Muhammad; Fizza, Ghulam; Ashraf, Muhammad Waqar; Butt, Rizwan Aslam; Ngadi, Md. Asri; Gungor, Vehbi CagriSmart Grid Industry 4.0 (SGI4.0) defines a new paradigm to provide high-quality electricity at a low cost by reacting quickly and effectively to changing energy demands in the highly volatile global markets. However, in SGI4.0, the reliable and efficient gathering and transmission of the observed information from the Internet of Things (IoT)-enabled Cyberphysical systems, such as sensors located in remote places to the control center is the biggest challenge for the Industrial Multichannel Wireless Sensors Networks (IMWSNs). This is due to the harsh nature of the smart grid environment that causes high noise, signal fading, multipath effects, heat, and electromagnetic interference, which reduces the transmission quality and trigger errors in the IMWSNs. Thus, an efficient monitoring and real-time control of unexpected changes in the power generation and distribution processes is essential to guarantee the quality of service (QoS) re-quirements in the smart grid. In this context, this paper de-scribes the dataset contains measurements acquired by the IMWSNs during events monitoring and control in the smart grid. This work provides an updated detail comparison of our proposed work, including channel detection, channel assign-ment, and packets forwarding algorithms, collectively called CARP [1] with existing G-RPL [2] and EQSHC [3] schemes in the smart grid. The experimental outcomes show that the dataset and is useful for the design, development, testing, and validation of algorithms for real-time events monitoring and control applications in the smart grid. (C) 2021 The Authors. Published by Elsevier Inc.Data Paper Citation - WoS: 26Citation - Scopus: 33Big Datasets of Optical-Wireless Cyber-Physical Systems for Optimizing Manufacturing Services in the Internet of Things-Enabled Industry 4.0(Elsevier, 2022-06) Faheem, Muhammad; Butt, Rizwan AslamThe Industry 4.0 revolution is aimed to optimize the product design according to the customers' demand, quality requirements and economic feasibility. Industry 4.0 employs advanced two-way communication technologies for optimizing the manufacturing process to increase the sales of the products and revenues to cope the existing global economy issues. In Industry 4.0, big data obtained from the Internet of Things (IoT)-enabled industrial Cyber-Physical Systems (CPS) plays an important role in enhancing the system service performance to boost the productivity with enhanced quality of customer experience. This paper presents the big datasets obtained from the Internet of things (IoT)-enabled Optical Wireless Sensor Networks (OWSNs) for optimizing service systems' performance in the electronics manufacturing Industry 4.0. The updated raw and analyzed big datasets of our published work [3] contain five values namely, data delivery, latency, congestion, throughput, and packet error rate in OWSNs. The obtained dataset are useful for optimizing the service system performance in the electronics manufacturing Industry 4.0. (c) 2022 The Author(s). Published by Elsevier Inc. This is an open access article under the CC BY license (http://creativecommons.org/licenses/by/4.0/)Article Citation - WoS: 21Citation - Scopus: 24A Multiobjective, Lion Mating Optimization Inspired Routing Protocol for Wireless Body Area Sensor Network Based Healthcare Applications(MDPI, 2019-11-20) Faheem, Muhammad; Butt, Rizwan Aslam; Raza, Basit; Alquhayz, Hani; Abbas, Muhammad Zahid; Ngadi, Md Asri; Gungor, Vehbi CagriThe importance of body area sensor networks (BASNs) is increasing day by day because of their increasing use in Internet of things (IoT)-enabled healthcare application services. They help humans in improving their quality of life by continuously monitoring various vital signs through biosensors strategically placed on the human body. However, BASNs face serious challenges, in terms of the short life span of their batteries and unreliable data transmission, because of the highly unstable and unpredictable channel conditions of tiny biosensors located on the human body. These factors may result in poor data gathering quality in BASNs. Therefore, a more reliable data transmission mechanism is greatly needed in order to gather quality data in BASN-based healthcare applications. Therefore, this study proposes a novel, multiobjective, lion mating optimization inspired routing protocol, called self-organizing multiobjective routing protocol (SARP), for BASN-based IoT healthcare applications. The proposed routing scheme significantly reduces local search problems and finds the best dynamic cluster-based routing solutions between the source and destination in BASNs. Thus, it significantly improves the overall packet delivery rate, residual energy, and throughput with reduced latency and packet error rates in BASNs. Extensive simulation results validate the performance of our proposed SARP scheme against the existing routing protocols in terms of the packet delivery ratio, latency, packet error rate, throughput, and energy efficiency for BASN-based health monitoring applications.