Scopus İndeksli Yayınlar Koleksiyonu
Permanent URI for this collectionhttps://hdl.handle.net/20.500.12573/395
Browse
11 results
Search Results
Article Citation - WoS: 4Citation - Scopus: 4Transparent Films Made of Highly Scattering Particles(Amer Chemical Soc, 2020-01-13) Erdem, Talha; Yang, Lan; Xu, Peicheng; Altintas, Yemliha; O'Neil, Thomas; Caciagli, Alessio; Eiser, ErikaToday, colloids are widely employed in various products from creams and coatings to electronics. The ability to control their chemical, optical, or electronic features by controlling their size and shape explains why these materials are so widely preferred. Nevertheless, altering some of these properties may also lead to some undesired side effects, one of which is an increase in optical scattering upon concentration. Here, we address this strong scattering issue in films made of binary colloidal suspensions. In particular, we focus on raspberry-type polymeric particles made of a spherical polystyrene core decorated by small hemispherical domains of acrylate with an overall positive charge, which display an unusual stability against aggregation in aqueous solutions. Their solid films display a brilliant red color due to Bragg scattering but appear completely white on account of strong scattering otherwise. To suppress the scattering and induce transparency, we prepared films by hybridizing them with oppositely charged PS particles with a size similar to that of the bumps on the raspberries. We report that the smaller PS particles prevent raspberry particle aggregation in solid films and suppress scattering by decreasing the spatial variation of the refractive index inside the film. We believe that the results presented here provide a simple strategy to suppress strong scattering of larger particles to be used in optical coatings.Article Citation - WoS: 2Citation - Scopus: 2Transparent Colloidal Crystals With Structural Colours(Frontiers Media S.A., 2022-03-07) Erdem, Talha; O'Neill, Thomas; Zupkauskas, Mykolas; Caciagli, Alessio; Xu, Peicheng; Lan, Yang; Eiser, Erika; O’Neill, ThomasSpatially ordered arrangements of spherical colloids are known to exhibit structural colours. The intensity and brilliance of these structural colours typically improve with colloidal monodispersity, low concentrations of point and line defects and with increasing refractive index contrast between the colloids and the embedding medium. Here we show that suspensions of charge stabilised, fluorinated latex particles with low refractive-index contrast to their aqueous background form Wigner crystals with FCC symmetry for volume fractions between 13 and 40%. In reflection they exhibit both strong, almost angle-independent structural colours and sharp, more brilliant Bragg peaks despite the particle polydispersity and bimodal distribution. Simultaneously, these suspensions appear transparent in transmission. Furthermore, binary AB, A(2)B and A(13)B type mixtures of these fluorinated and similarly sized polystyrene particles appeared predominantly white but with clear Bragg peaks indicating a CsCl-like BCC structure and more complex crystals. We characterised the suspensions using a combination of reflectivity measurements and small-angle x-ray scattering, complemented by reflectivity modelling.Article Sustainable Next-Generation Color Converters From P. Harmala Seed Extracts for Solid-State Lighting(Royal Soc Chemistry, 2024) Erdem, Talha; Orenc, Ali; Akcan, Dilber; Duman, Fatih; Soran-Erdem, ZelihaTraditional solid-state lighting heavily relies on color converters, which often have a significant environmental footprint. As an alternative, natural materials such as plant extracts could be employed if their low quantum yields (QYs) in liquid and solid states were higher. With this motivation, here, we investigate the optical properties of aqueous P. harmala extract, develop efficient color-converting solids through a cost-effective and environmentally friendly method, and integrate them with light-emitting diodes (LEDs). To achieve high-efficiency solid hosts for P. harmala-based fluorophores, we optically and structurally compare two crystalline and two cellulose-based platforms. Structural analyses reveal that sucrose crystals, cellulose-based cotton, and paper platforms enable a relatively homogeneous distribution of fluorophores compared to KCl crystals. Optical characterization demonstrates that the extracted solution and the extract-embedded paper possess QYs of 75.6% and 44.7%, respectively, whereas the QYs of the cotton, sucrose, and KCl crystals remain below 10%. We demonstrated that the paper host with the highest efficiency causes a blueshift in the P. harmala fluorescence, whereas the cotton host induces a redshift. We attribute this to the passivation of nonradiative transitions related to the structure of the hosts. Subsequently, as a proof-of-concept demonstration, we integrate the as-prepared efficient solids of P. harmala for the first time with a light-emitting diode (LED) chip to produce a color-converting LED. The resulting blue-emitting LED achieves a luminous efficiency of 21.9 lm W-elect(-1) with CIE color coordinates of (0.139, 0.070). These findings mark a significant step toward the utilization of plant-based fluorescent biomolecules in solid-state lighting, offering promising environmentally friendly organic color conversion solutions for future lighting applications.Article Citation - WoS: 9Citation - Scopus: 11Size, Material Type, and Concentration Estimation for Micro-Particles in Liquid Samples(Elsevier Science SA, 2024-05) Genc, Sinan; Erdem, Talha; Icoz, KutayThe on -site examination and characterization of microparticles are becoming crucial due to the significant rise in plastic pollution in natural resources. Hence, identifying the specific microplastic composition and quantity would enable the implementation of preventive measures. This paper presents a cost-effective setup that utilizes the Random Forest algorithm to detect the size and refractive index of micro particles, hence facilitating the identification of the material type. The system utilizes the scattering patterns of laser light from the dispersion of microparticles, namely within the concentration range of 0.05 fM to 3.00 fM. The refractive indices and particle sizes of melamine (Me8) spheres with a size of 8 mu m, as well as polystyrene (PS8) spheres with a size of 8 mu m and (PS10) 10 mu m, were estimated using the Random Forest algorithm and recorded scattering patterns. The proposed method may deliver findings with an average deviation of 0.23 mu m for particle size and 0.015 for particle refractive index. The statistical analysis indicated that there was no notable disparity between the experimental findings and the predictions derived from the machine learning system. The existing configuration can be readily converted into a point -of -use system that can be employed on -site for the purpose of monitoring and identifying microplastic contamination.Article Citation - WoS: 1Citation - Scopus: 1Osmotic-Pressure Nematic Ordering in Suspensions of Laponite and Carboxy Methyl Cellulose(Amer Chemical Soc, 2020-10-12) Xu, Peicheng; Yazici, Ahmet F.; Erdem, Talha; Lekkerkerker, Henk N. W.; Mutlugun, Evren; Eiser, ErikaLaponite is a synthetic clay that is known to form gels in aqueous suspensions at low concentrations (0.01 g/cm(3)) Although it is expected to form lyotropic liquid crystals, such phases usually do not form, as a consequence of laponite's tendency to form gels at concentrations below the threshold for liquid crystal formation. Here we show that macroscopic, birefringent phases of laponite can be prepared through osmotic compression of a laponite solution by an aqueous solution of carboxy methyl cellulose (CMC). We present polarization imaging studies showing how the initially dilute, isotropic laponite phase shrinks while developing typical birefringence colors between crossed polarizers. Using the MichelLevy interference charts, we were able to extract the refractive index and orientation of the laponite nanodisks in the compressed region. Our observations allow us to propose a tentative state diagram, indicating the concentration regions for which we obtain optically anisotropic gels.Article Citation - WoS: 50Citation - Scopus: 63Optical Detection of Microplastics in Water(Springer Heidelberg, 2021-01-19) Iri, Ahmet H.; Shahrah, Malek H. A.; Ali, Ali M.; Qadri, Sayed A.; Erdem, Talha; Ozdur, Ibrahim T.; Icoz, KutayUnfortunately, the plastic pollution increases at an exponential rate and drastically endangers the marine ecosystem. According to World Health Organization (WHO), microplastics in drinking water have become a concern and may be a risk to human health. One of the major efforts to fight against this problem is developing easy-to-use, low-cost, portable microplastic detection systems. To address this issue, here, we present our prototype device based on an optical system that can help detect the microplastics in water. This system that costs less than $370 is essentially a low-cost Raman spectrometer. It includes a collimated laser (5 mW), a sample holder, a notch filter, a diffraction grating, and a CCD sensor all integrated in a 3D printed case. Our experiments show that our system is capable of detecting microplastics in water having a concentration less than 0.015% w/v. We believe that the designed portable device can find a widespread use all over the world to monitor the microplastic content in an easier and cost-effective manner.Article Citation - WoS: 12Citation - Scopus: 13Numerical Analysis and Experimental Verification of Optical Scattering From Microplastics(Royal Soc, 2023-08) Genc, Sinan; Icoz, Kutay; Erdem, TalhaAccurate and fast characterization of the micron-sized plastic particles in aqueous media requires an in-depth understanding of light interaction with these particles. Due to the complexity of Mie scattering theory, the features of the scattered light have rarely been related to the physical properties of these tiny objects. To address this problem, we reveal the relation of the wavelength-dependent optical scattering patterns with the size and refractive index of the particles by numerically studying the angular scattering features. We subsequently present a low-cost setup to measure the optical scattering of the particles. Theoretical investigation shows that the angular distribution of the scattered light by microplastics carries distinct signatures of the particle size and the refractive index. The results can be used to develop a portable, low-cost setup to detect microplastics in water.Article Citation - WoS: 51Citation - Scopus: 51Multiplexed Patterning of Cesium Lead Halide Perovskite Nanocrystals by Additive Jet Printing for Efficient White Light Generation(Elsevier Science SA, 2020-01) Altintas, Yemliha; Torun, Ilker; Yazici, Ahmet Faruk; Beskazak, Emre; Erdem, Talha; Onses, M. Serdar; Mutlugun, Evren; Serdar Onses, M.Inorganic perovskite nanocrystals (PNCs) offer the ability to precisely but also flexibly control the peak emission wavelength while also possessing narrow-band emission spectra and high quantum yields. Owing to these features, PNCs have been already employed as color converters on LEDs. Nevertheless, the anion exchange reactions that prevent the blending of perovskites of different colors remain as an important bottleneck. As a remedy to this issue, here we employ additive jet printing to form separated stripes of these nanocrystals. Within this framework, we first present the synthesis of CsPbBr3 and CsPbBrxI3-x nanocrystals spanning the whole visible regime and optimize the cleaning procedure to obtain PNCs possessing photoluminescence quantum yields as high as 91% and emission linewidths as narrow as 15 nm, making them suitable for high quality white light generation. Next, we employ electrohydrodynamic jet printing to form closely spaced stripes of PNCs of various colors and integrated these films with a blue LED to create a white LED. Our proof-of-concept LED achieves high photometric performance as it possesses a color rendering index of 91.3, luminous efficacy of optical radiation > 300 lm/W-opt, and correlated color temperature of ca. 7000 K. We believe that additive jet printing technique will pave the way for a ubiquitous use of these PNCs in light-emitting devices in the near future.Article Citation - WoS: 2Citation - Scopus: 3Magnetically Controlled Anisotropic Light Emission of DNA-Functionalized Supraparticles(Springer Heidelberg, 2022-08-23) Erdem, Talha; Zupkauskas, Mykolas; O'Neill, Thomas; Cassiagli, Alessio; Xu, Peicheng; Altintas, Yemliha; Eiser, Erika; O’Neill, ThomasIn this article, we show the DNA-functionalization of supraparticles, form their network, and manipulate the optical features of these networks by applying a magnetic field. We start with preparing the supraparticles (SPs) of semiconducting InP/ZnSeS/ZnS quantum dots (QDs), plasmonic silver nanoparticles, and superparamagnetic iron oxide nanoparticles. These SPs are prepared by employing azide-functionalized amphiphilic diblock or triblock copolymers as well as by using their combinations. Subsequently, we attached single-stranded DNAs to these SPs by employing copper-free click chemistry. Next, we hybridized DNA-coated QD SPs with the iron oxide SPs and formed a network. By applying a magnetic field, we restructured this network such that the iron oxide SPs are aligned. This led to an anisotropic emission from the QD SPs with a polarization ratio of 1.9. This study presents a proof-of-concept scheme to control the optical features of a self-assembled supraparticle system using an external interaction. We believe that our work will further contribute to the utilization of smart self-assembly techniques in optics and photonics.Article Citation - WoS: 15Citation - Scopus: 14Effects of Silver Nanowires and Their Surface Modification on Electromagnetic Interference, Transport and Mechanical Properties of an Aerospace Grade Epoxy(Sage Publications Ltd, 2024-03-03) Ozkutlu Demirel, Merve; Ozturkmen, Mahide B.; Savas, Muzeyyen; Mutlugun, Evren; Erdem, Talha; Oz, YahyaThe aerospace industry has progressively grown its use of composites. Electrically conductive nanocomposites are among important modern materials for this sector. We report on a bulk composite containing silver nanowires (AgNW) and an aerospace grade epoxy for use in carbon fiber reinforced polymers (CFRPs). AgNWs' surfaces were also modified to enhance their ability to be dispersed in epoxy. Composites were obtained by use of three-roll milling which is of major interest for industrial applications, especially for the aerospace sector, since the process is scalable and works for aerospace grade resins with high curing temperatures. Our main objective is to improve the electromagnetic interference (EMI) shielding performance of CFRPs via improving the properties of the resin material. The addition of AgNWs did not considerably alter the flexural strength of the epoxy, however the composite with surface-modified AgNWs has a 46 % higher flexural strength. Adding AgNWs over a low threshold concentration of 0.05 wt% significantly enhanced the electrical conductivity. Conductivities above the percolation threshold lie around 102 S/m. At a concentration of 5 wt% AgNW, the EMI shielding efficiency (SE) of epoxy increased from 3.49 to 12.31 dB. Moreover, the thermal stability of the epoxy was unaffected by AgNWs. As a result, it was discovered that (surface modified) AgNWs improved the (multifunctional) capabilities of the aerospace grade epoxy resin which might be used in CFRPs to further enhance properties of composites parts, demonstrating suitability of AgNWs' as a reinforcement material in aerospace applications.