Scopus İndeksli Yayınlar Koleksiyonu
Permanent URI for this collectionhttps://hdl.handle.net/20.500.12573/395
Browse
20 results
Search Results
Article Densification-Induced Chemical Reorganization and Mechanical Enhancement in Amorphous Si2BC3N(Elsevier, 2026-02) Durandurdu, MuratThe atomistic mechanisms that govern the mechanical performance of amorphous silicon-boron carbonitride (SiBCN) ceramics remain insufficiently understood, particularly regarding the role of density. Here, we employ ab initio molecular dynamics simulations to elucidate the structural evolution and mechanical response of low-density (LDA, 2.20 g/cm3) and high-density (HDA, 2.53 g/cm3) amorphous Si2BC3N prepared via melt-quench. The HDA phase exhibits markedly higher atomic packing and network connectivity, accompanied by a nontrivial chemical reorganization. Densification significantly enhances heteronuclear bonding-especially Si-C coordination-while suppressing C-C and Si-Si homopolar bonds. These changes yield substantial mechanical strengthening: the HDA phase exhibits a 48% increase in bulk modulus (130 GPa vs. 88 GPa), along with elevated Young's (266 GPa) and shear (112 GPa) moduli. Our findings reveal a clear density-structure-property relationship in amorphous SiBCN, demonstrating that densification suppresses weak self-bonded motifs and promotes a robust, interconnected atomic network. This insight provides a pathway for designing high-performance amorphous SiBCN ceramics for extreme-environment applications.Article Tuning Properties of Amorphous Boron Via Hydrogenation: An Ab Initio Study(Elsevier, 2026-01) Durandurdu, MuratAb initio simulations are employed to investigate the structural, mechanical, and electronic properties of hydrogenated amorphous boron (a-B:H) across a range of hydrogen concentrations (approximate to 6-21 at.%). The results indicate that pentagonal-like boron clusters constitute the primary structural motifs. The bonding environment consists of both B-H terminal bonds and B-H-B bridging bonds, with the fraction of bridging bonds ranging from 10 % to 16 %. Increasing the hydrogen content leads to a reduction in density and bulk modulus, accompanied by a systematic widening of the electronic band gap. These results demonstrate that hydrogen incorporation profoundly modifies the atomic structure, softens the network, and enhances the semiconducting character of a-B:H, highlighting the tunability of properties in boron-based amorphous materials.Article Pressure-Driven Structural Evolution of Amorphous InN(Elsevier, 2025-02) Durandurdu, MuratThrough constant-pressure ab initio simulations, we have uncovered high-pressure phase transformations in amorphous indium nitride for the first time. Our results reveal a distinct two-step progression under compression. Initially, a polyamorphic transition occurs, where the low-density amorphous (LDA) phase transforms into a high-density amorphous (HDA) phase. This HDA structure remains stable in some pressure range and then crystallization initiates, leading to a rocksalt configuration. Upon decompression, the HDA phase reverts to an amorphous network with a slightly higher density and coordination number than the initial LDA state.Article Citation - WoS: 10Citation - Scopus: 11Liquid Boron and Amorphous Boron: An Ab Initio Molecular Dynamics Study(Elsevier, 2015-06) Durandurdu, MuratThe atomic structure of liquid and amorphous boron is investigated using an ab initio molecular dynamics technique. Liquid and amorphous states are found to have notably different microstructures and an average coordination number. Ideal and defective pentagonal pyramidal polyhedrons are the primary building unit of liquid boron but B-12 icosahedra do not exist in the liquid state. During the rapid solidification, more ideal pentagonal pyramids develop progressively, resulting into a gradual formation of B-12 icosahedra. On the basis of our findings, the atomic packing of pure amorphous boron is proposed to be somewhat close to that of the alpha-rhombohedral phase in contrast to the previous suggestions. (C) 2015 Elsevier B.V. All rights reserved.Editorial Citation - WoS: 4Citation - Scopus: 5Hydrogenated Amorphous Boron Nitride: A First Principles Study(Elsevier, 2018-12) Uchoyuk, Tevhide Ayca; Durandurdu, MuratThe influence of hydrogenation on the atomic structure and electronic properties of amorphous boron nitride (alpha-BN) is investigated by using an ab-initio molecular dynamics technique. The structural evaluation of alpha-BN and the hydrogenated (alpha-BN:H) models with four different hydrogen concentrations reveals that although their short-range order is mainly similar to each other, hydrogenation yields some noticeable amendments on the local structure of alpha-BN. Hydrogenation suppresses the formation of twofold coordinated chain-like structures and tetragonal-like rings and leads to more sp(2) and even sp(3) hybridizations. It is also observed that the formation of N-H bonding is more favorable than that of the B-H bonding in the alpha-BN:H configurations. Furthermore hydrogenation is found to have an insignificant impact on the electronic structure of alpha-BN.Article High-Density Amorphous Phase of CdO(Elsevier, 2017-05) Durandurdu, MuratAn amorphous CdO model is densified up to a theoretical pressure of 200 GPa. A continues phase transformation from a low-density amorphous (LDA) phase to a high-density amorphous (HDA) phase is observed through the simulation. Associated with the phase transformation, the average coordination raises progressively from similar to 5.5 to similar to 7.0. The sevenfold coordination is the most abundant motifs in the HDA state. Therefore its short-range order differs principally from that of the known CdO crystals. Upon pressure release, an amorphous state being intermediate between the LDA structure and the HDA phase is recovered with a mean coordination number of 5.9. (C) 2017 Elsevier B.V. All rights reserved.Article Citation - WoS: 5Citation - Scopus: 4Densification of Amorphous Boron Under Pressure(Elsevier, 2017-09) Durandurdu, MuratThe densification mechanism of amorphous boron under pressure is investigated using a constant pressure ab initio technique and found to be associated with two consecutive amorphous-to-amorphous phase transformations. Amorphous boron gradually transforms into a high density amorphous phase, followed by a first order phase transformation into another high density amorphous state. The high density amorphous phases of boron are not quenchable to ambient pressure. Most quasimolecular B-12 icosahedra in the model are found to be stable at the highest the theoretical pressure of 280 GPa reached in the present work and thus the phase transformations are principally due to the re-structural arrangements in the parts of the model connecting B-12 icosahedra.Article Boron-Rich Amorphous Boron Oxides From Ab Initio Simulations(Elsevier, 2023-03) Karacaoglan, Aysegul Ozlem Cetin; Durandurdu, MuratAmorphous boron oxide (BxO1-x, 0.5 <= x <= 95) configurations are simulated by means of an ab initio molecular dynamics technique and their microstructure and mechanical properties are revealed in details. With increasing B content, the average B-coordination noticeably increases from 3.18 to 5.62 whereas the O-coordination, sur-prisingly, remains almost null, about 2.0. The formation of complete B12 molecules is observed after 80% B concentrations. Chemical segregation is witnessed in most models and hence the resulting configurations show B: B2O3 phase separations. The mechanical properties (bulk, shear and Young moduli, Vickers hardness and microhardness) substantially increase with increasing B content. The amorphous materials (BxO1-x, x >= 80) are classified as hard materials. Within the limitations of DFT calculations and approaches used, we speculate that there is a ductile-to-brittle transition at around 70-75% B contents.Article Citation - WoS: 3Citation - Scopus: 4An In-Depth Investigation of Mg-Zn Metallic Glasses: A First Principles Study(Elsevier, 2018-10) Erkartal, Mustafa; Durandurdu, MuratThe atomic structures, glass forming evolutions, mechanical properties and high pressure behavior of Mg75Zn20Ca5 and Mg60Zn35Ca5 bulk metallic glasses, which are promising candidates for biomedical implants, have been examined by using ab initio molecular dynamics simulations. The pair-distribution function and coordination number analyses show that increasing Zn content in the alloy results in a decrease in several bond distances and an increase in the total coordination number of each species due to the atomic size difference between Mg and Zn atoms. According to the Voronoi tessellation, bond pair and bond angle distribution analyzes, the fivefold geometrical arrangements (pentagonal-bipyramid) are the most predominant in the first coordination shell, indicating the stability of the amorphous states and their dense atomic packing. The most striking result emerged from the calculations of mechanical properties is that an increase of Zn (>= 30%) content in the alloy yields embrittlement in the alloys. Under uniaxial compressions, both compositions undergo structural failure between 6 and 8 GPa. Under hydrostatic pressure, a diminishing in fcc/hcp ordering and an enlargement of the ideal icosahedral ordering may indicate a more disordered structure. In our view, these results represent a good step toward understanding the atomic structures Mg-Zn-Ca bulk metallic glasses.Article Citation - WoS: 2Citation - Scopus: 2Amorphous Silicon Triboride: A First Principles Study(Elsevier, 2020-05) Ozlem, Aysegul; Karacaoglan, Cetin; Durandurdu, Murat; Çetin Karacaoğlan, Ayşegül ÖzlemUsing ab initio molecular dynamics simulations, an amorphous silicon triboride (a-SiB3) network is generated and its atomic structure, electronic features and mechanical properties are compared with those of the crystal. The average coordination number of B and Si atoms in a-SiB3 is found as 5.8 and 4.6, correspondingly, close to 6.0 (B atom) and 5.0 (Si atom) in the crystal. A careful investigation reveals partial structural similarities around B atoms but not around Si atoms in both phases of SiB3. The presence of B-12, B11Si and B-10 molecules is witnessed in a-SiB3. The last two molecules, however, do not exist in the crystal. a-SiB3 is a semiconducting material. The bulk modulus of the ordered and disordered structures is projected to be 151 GPa and 131 GPa, respectively. The Vickers hardness of a-SiB3 is calculated to be similar to 13-15 GPa, less than similar to 20-25 GPa estimated for the crystal.