Scopus İndeksli Yayınlar Koleksiyonu

Permanent URI for this collectionhttps://hdl.handle.net/20.500.12573/395

Browse

Filters

2019 - 201932020 - 20223

Settings

Author: search.filters.author.Butt, Rizwan AslamSubject: search.filters.subject.Internet of Things

Search Results

Now showing 1 - 6 of 6
  • Article
    Citation - Scopus: 63
    Energy Efficient and Reliable Data Gathering Using Internet of Software-Defined Mobile Sinks for WSNS-Based Smart Grid Applications
    (Elsevier B.V., 2019-10) Faheem, Muhammed Yasir; Butt, Rizwan Aslam; Raza, Basit; Ashraf, Muhammad Waqar; Ngadi, M. A.; Güngör, Vehbi Çağrı
    The smart grid is an emerging concept that introduces innovative ways to handle the power quality and reliability issues for both service provider and consumers. The key aims of the smart grid (SG) in smart cities (SCs) is to preserve a certain level of residents’ life quality and support the entire spectrum of their economic activities. In this paper, we present a novel Energy Efficient and Reliable Data Gathering Routing Protocol (ODGRP) for wireless sensor networks (WSNs)-based smart grid applications. The developed scheme employs a software-defined centralized controller and multiple mobile sinks for energy efficient and reliable data gathering from WSNs in the SG. The extensive simulation results conducted through the EstiNet 9.0 show that the designed scheme outperforms existing approaches and achieves its defined goals for event-driven applications in the SG. © 2019 Elsevier B.V., All rights reserved.
  • Data Paper
    Citation - WoS: 34
    Citation - Scopus: 41
    Big Data Acquired by Internet of Things-Enabled Industrial Multichannel Wireless Sensors Networks for Active Monitoring and Control in the Smart Grid Industry 4.0
    (Elsevier, 2021-04) Faheem, Muhammad; Fizza, Ghulam; Ashraf, Muhammad Waqar; Butt, Rizwan Aslam; Ngadi, Md. Asri; Gungor, Vehbi Cagri
    Smart Grid Industry 4.0 (SGI4.0) defines a new paradigm to provide high-quality electricity at a low cost by reacting quickly and effectively to changing energy demands in the highly volatile global markets. However, in SGI4.0, the reliable and efficient gathering and transmission of the observed information from the Internet of Things (IoT)-enabled Cyberphysical systems, such as sensors located in remote places to the control center is the biggest challenge for the Industrial Multichannel Wireless Sensors Networks (IMWSNs). This is due to the harsh nature of the smart grid environment that causes high noise, signal fading, multipath effects, heat, and electromagnetic interference, which reduces the transmission quality and trigger errors in the IMWSNs. Thus, an efficient monitoring and real-time control of unexpected changes in the power generation and distribution processes is essential to guarantee the quality of service (QoS) re-quirements in the smart grid. In this context, this paper de-scribes the dataset contains measurements acquired by the IMWSNs during events monitoring and control in the smart grid. This work provides an updated detail comparison of our proposed work, including channel detection, channel assign-ment, and packets forwarding algorithms, collectively called CARP [1] with existing G-RPL [2] and EQSHC [3] schemes in the smart grid. The experimental outcomes show that the dataset and is useful for the design, development, testing, and validation of algorithms for real-time events monitoring and control applications in the smart grid. (C) 2021 The Authors. Published by Elsevier Inc.
  • Data Paper
    Citation - WoS: 26
    Citation - Scopus: 33
    Big Datasets of Optical-Wireless Cyber-Physical Systems for Optimizing Manufacturing Services in the Internet of Things-Enabled Industry 4.0
    (Elsevier, 2022-06) Faheem, Muhammad; Butt, Rizwan Aslam
    The Industry 4.0 revolution is aimed to optimize the product design according to the customers' demand, quality requirements and economic feasibility. Industry 4.0 employs advanced two-way communication technologies for optimizing the manufacturing process to increase the sales of the products and revenues to cope the existing global economy issues. In Industry 4.0, big data obtained from the Internet of Things (IoT)-enabled industrial Cyber-Physical Systems (CPS) plays an important role in enhancing the system service performance to boost the productivity with enhanced quality of customer experience. This paper presents the big datasets obtained from the Internet of things (IoT)-enabled Optical Wireless Sensor Networks (OWSNs) for optimizing service systems' performance in the electronics manufacturing Industry 4.0. The updated raw and analyzed big datasets of our published work [3] contain five values namely, data delivery, latency, congestion, throughput, and packet error rate in OWSNs. The obtained dataset are useful for optimizing the service system performance in the electronics manufacturing Industry 4.0. (c) 2022 The Author(s). Published by Elsevier Inc. This is an open access article under the CC BY license (http://creativecommons.org/licenses/by/4.0/)
  • Article
    Citation - WoS: 21
    Citation - Scopus: 24
    A Multiobjective, Lion Mating Optimization Inspired Routing Protocol for Wireless Body Area Sensor Network Based Healthcare Applications
    (MDPI, 2019-11-20) Faheem, Muhammad; Butt, Rizwan Aslam; Raza, Basit; Alquhayz, Hani; Abbas, Muhammad Zahid; Ngadi, Md Asri; Gungor, Vehbi Cagri
    The importance of body area sensor networks (BASNs) is increasing day by day because of their increasing use in Internet of things (IoT)-enabled healthcare application services. They help humans in improving their quality of life by continuously monitoring various vital signs through biosensors strategically placed on the human body. However, BASNs face serious challenges, in terms of the short life span of their batteries and unreliable data transmission, because of the highly unstable and unpredictable channel conditions of tiny biosensors located on the human body. These factors may result in poor data gathering quality in BASNs. Therefore, a more reliable data transmission mechanism is greatly needed in order to gather quality data in BASN-based healthcare applications. Therefore, this study proposes a novel, multiobjective, lion mating optimization inspired routing protocol, called self-organizing multiobjective routing protocol (SARP), for BASN-based IoT healthcare applications. The proposed routing scheme significantly reduces local search problems and finds the best dynamic cluster-based routing solutions between the source and destination in BASNs. Thus, it significantly improves the overall packet delivery rate, residual energy, and throughput with reduced latency and packet error rates in BASNs. Extensive simulation results validate the performance of our proposed SARP scheme against the existing routing protocols in terms of the packet delivery ratio, latency, packet error rate, throughput, and energy efficiency for BASN-based health monitoring applications.
  • Article
    Citation - WoS: 33
    Citation - Scopus: 40
    A Multi-Channel Distributed Routing Scheme for Smart Grid Real-Time Critical Event Monitoring Applications in the Perspective of Industry 4.0
    (Inderscience Publishers, 2019) Faheem, Muhammed Yasir; Butt, Rizwan Aslam; Raza, Basit; Ashraf, Muhammad Waqar; Ngadi, M. A.; Güngör, Vehbi Çağrı
    Recently, the 4th industrial revolution known as Industry 4.0 has paved way for a systematical deployment of the modernised power grid to fulfil the continuously growing energy demand of the 21st century. This paper proposes a novel channel-aware distributed routing protocol named CARP for CRSNs-based SG applications. In CARP, the proposed cooperative channel assignment mechanism significantly improves the detection reliability and mitigates the noise and congested spectrum bands resulting in reliable and high capacity links for CRSNs-based SG applications. Moreover, to support higher capacity data requirements and to maximise the spectrum utilisation, the proposed multi-hop routing mechanism selects a secondary user relay node rich in spectrum information with longer ideal probability at low interference in the network. The extensive simulation results conducted through EstiNet9.0 reveal that the proposed scheme achieves its defined goals compared to existing routing schemes designed for CRSNs-based applications. © 2020 Elsevier B.V., All rights reserved.
  • Article
    Citation - WoS: 43
    Citation - Scopus: 54
    CBI4.0: A Cross-Layer Approach for Big Data Gathering for Active Monitoring and Maintenance in the Manufacturing Industry 4.0
    (Elsevier, 2021) Faheem, Muhammad; Butt, Rizwan Aslam; Ali, Rashid; Raza, Basit; Ngadi, Md Asri; Gungor, Vehbi Cagri
    Industry 4.0 (I4.0) defines a new paradigm to produce high-quality products at the low cost by reacting quickly and effectively to changing demands in the highly volatile global markets. In Industry 4.0, the adoption of Internet of Things (IoT)-enabled Wireless Sensors (WSs) in the manufacturing processes, such as equipment, machining, assembly, material handling, inspection, etc., generates a huge volume of data known as Industrial Big Data (IBD). However, the reliable and efficient gathering and transmission of this big data from the source sensors to the floor inspection system for the real-time monitoring of unexpected changes in the production and quality control processes is the biggest challenge for Industrial Wireless Sensor Networks (IWSNs). This is because of the harsh nature of the indoor industrial environment that causes high noise, signal fading, multipath effects, heat and electromagnetic interference, which reduces the transmission quality and trigger errors in the IWSNs. Therefore, this paper proposes a novel cross-layer data gathering approach called CBI4.0 for active monitoring and control of manufacturing processes in the Industry 4.0. The key aim of the proposed CBI4.0 scheme is to exploit the multi-channel and multi-radio architecture of the sensor network to guarantee quality of service (QoS) requirements, such as higher data rates, throughput, and low packet loss, corrupted packets, and latency by dynamically switching between different frequency bands in the Multichannel Wireless Sensor Networks (MWSNs). By performing several simulation experiments through EstiNet 9.0 simulator, the performance of the proposed CBI4.0 scheme is compared against existing studies in the automobile Industry 4.0. The experimental outcomes show that the proposed scheme outperforms existing schemes and is suitable for effective control and monitoring of various events in the automobile Industry 4.0.