Scopus İndeksli Yayınlar Koleksiyonu
Permanent URI for this collectionhttps://hdl.handle.net/20.500.12573/395
Browse
2 results
Search Results
Article Optimizing Nanoclay-Enhanced Membranes for Oil Rejection Using Response Surface Methodology(Wiley, 2026) Gul, Ayse; Baris, Mesut; Boyraz, Pınar; Senol-Arslan, Dilek; Alibaz, Name NurThe efficient separation of waste oil from contaminated water is critical due to its challenges in environmental and industrial applications. This study investigated the production and optimization of polysulphone (PSF) membranes using two different types of clay (nanomer clay/CN and commercial nanoclay/NC). Response Surface Methodology (RSM) was applied to optimize the basic production parameters and nanoclay concentrations systematically to maximize oil rejection and permeability flow. The experimental results showed that NC and CN significantly increased the hydrophilicity, permeability, and fouling resistance of the membrane compared to pure PSF membranes. The contact angle significantly decreased from 64.34 degrees (pristine PSF) to 36.23 degrees (2% NC), indicating highly improved hydrophilicity. Consequently, the pure water flux increased from 177.2 L/m2 h to a maximum of 248.6 L/m2 h (1% NC). Furthermore, the modified membranes exhibited outstanding anti-fouling properties; the flux recovery ratio (FRR) improved from 88.09% to 96.20% (1% CN), while the decline ratio (DR) drastically dropped from 60.89% to 32.14%. The optimized condition for maximum removal efficiency using a modified quadratic model revealed that 2572 mg/L oil can be treated with a PSF membrane containing 2.0% CN to remove 98.271% of the oil. The model also suggests superiority of CN over NC with desirability factors of 0.978 and 0.900, respectively, while both demonstrated high efficiency. This theoretically modeled experimental comparative study highlights the importance of PSF membrane technology for efficient and sustainable oil-water separation and demonstrates the promising potential of nanoclay modifications.Article Citation - WoS: 10Citation - Scopus: 13Carbon Dioxide Absorption Using Monoethanolamine, Piperazine and N-Metil Solvents Under Counter Current Regime in Packed Column Reactor(Elsevier Sci Ltd, 2024-01) Gul, Ayse; Baris, Mesut; Un, Umran TezcanIn this research the carbon dioxide absorption using Monoethanolamine (MEA), Piperazine (PZ) and N-Metil-2-pirolidon (NMP) solvents and their different blends (MEA/NMP, PZ/NMP, MEA/PZ) in packed column reactor filled with Raschig rings was investigated and compared for efficient carbon dioxide absorption. The process was followed in a countercurrent regime under a liquid flow rate of 200 mL/min, gas flow rate of 2.5 L/min, and CO2 concentration of 50,000 ppm. Carbon dioxide removal efficiency (%), absorption capacity (mol CO2/mol solvent), overall mass transfer coefficient (1/min) and absorption rate (mol/l.s) were monitored. The highest obtained values for carbon dioxide removal efficiency, absorption capacity and overall mass transfer coefficient were 57.5%, 0.148 mol CO2/mol solvent and 2.178 min-1 respectivelly when 0.03 M MEA/0.07 M PZ in a hybrid system was used. It was concluded that PZ blends with MEA were successful absorbent as the organic physical solvent whereas NMP didn't show improving effect in blends with MEA on the absorption efficiency.