Scopus İndeksli Yayınlar Koleksiyonu

Permanent URI for this collectionhttps://hdl.handle.net/20.500.12573/395

Browse

Filters

2017 - 201952020 - 202525

Settings

Author: search.filters.author.Bal, BurakLanguage: search.filters.language.en

Search Results

Now showing 1 - 10 of 30
  • Article
    Tuning Mechanical Performance of PCL Scaffolds: Influence of 3D Bioprinting Parameters, Polymer Concentration, and Solvent Selection
    (IOP Publishing Ltd, 2025-09-01) Ceylan, Saniye Aylin; Baltacioglu, Mehmet Furkan; Bal, Burak; Bayram, Ferdi Caner; Isoglu, Ismail Alper
    The mechanical performance of three-dimensional (3D) bioprinted scaffolds is susceptible to printing parameters and material formulation. In this study, poly (epsilon-caprolactone) (PCL) scaffolds were fabricated using four different polymer concentrations (10%, 25%, 50%, and 75% w/v) to investigate how these variations, along with process parameters, influence mechanical behavior. Maintaining the structural integrity of bioprinted constructs requires careful optimization of polymer concentration and precise control over parameters such as printing speed, pressure, and infill density. Tensile tests were conducted to evaluate the effects of these variables. Among the tested conditions, a 50% (w/v) concentration allowed for a broader operational window, enabling fabrication across a range of printing speeds and pressures. At a printing speed of 5 mm s-1, PCL-DCM exhibited a Young's modulus of 39.0 MPa, while PCL-CF samples printed at 10 mm s-1 achieved the highest modulus of 32.0 MPa. Notably, when the printing speed was kept constant, applying higher pressures led to an increase in Young's modulus, suggesting that pressure plays a key role in enhancing scaffold stiffness. When comparing the 50% and 75% (w/v) polymer concentrations, the 50% (w/v) formulation stood out by offering both higher elongation and greater stiffness, which makes it particularly suitable for load-bearing applications. These findings provide a quantitative framework for optimizing extrusion-based bioprinting of PCL scaffolds, with implications for customized biomedical implants and regenerative medicine.
  • Article
    Citation - WoS: 1
    Citation - Scopus: 1
    Prediction of the Diffusible Hydrogen Concentration After Electrochemical Charging Utilizing Artificial Intelligence
    (IOP Publishing Ltd, 2025-09-01) Sivesoglu, Abdurrahman; Li, Yang; Bal, Burak
    The concentration of diffusible hydrogen in a material is of high importance as it helps to predict the hydrogen embrittlement effect in the material, and the amount of mechanical properties' degradation after reaching a critical concentration. Despite that, a simple experimental setup is not available to measure hydrogen concentration at service. In this paper, a multi-layer perceptron (MLP) model is developed using weight initialization, which can estimate the diffusible hydrogen concentration of Face-Centred-Cubic (FCC) metals after electrochemical charging. The input properties of the model include the electrochemical charging parameters of current density, temperature, and charging time as well as the grain size of the specimen. The MLP model with and without the weight initialization was validated and tested with unseen test dataset. The model in both cases showed an excellent predictive performance with a higher accuracy and faster convergence when using weight initialization. A linear correlation of 89% between the experimental and predicted hydrogen concentration was observed. This demonstrates that for the family of FCC metals under electrochemical charging, the estimation of diffusible hydrogen concentration is a feasible path for material safety design analysis.
  • Article
    Citation - WoS: 40
    Citation - Scopus: 43
    The Role of Hydrogen in the Edge Dislocation Mobility and Grain Boundary-Dislocation Interaction in Α-Fe
    (Pergamon-Elsevier Science Ltd, 2021-09) Kapci, Mehmet Fazil; Schoen, J. Christian; Bal, Burak; Schön, J. Christian
    The atomistic mechanisms of dislocation mobility depending on the presence of hydrogen were investigated for two edge dislocation systems that are active in the plasticity of alpha-Fe, specifically 1/2<111>{110} and 1/2<111>{112}. In particular, the glide of the dislocation pile-ups through a single crystal, as well as transmission of the pile-ups across the grain boundary were evaluated in bcc iron crystals that contain hydrogen concentrations in different amounts. Additionally, the uniaxial tensile response under a constant strain rate was analyzed for the aforementioned structures. The results reveal that the presence of hydrogen decreases the velocity of the dislocations -in contrast to the commonly invoked HELP (Hydrogen-enhanced localized plasticity) mechanism-, although some localization was observed near the grain boundary where dislocations were pinned by elastic stress fields. In the presence of pre-exisiting dislocations, hydrogen-induced hardening was observed as a consequence of the restriction of the dislocation mobility under uniaxial tension. Furthermore, it was observed that hydrogen accumulation in the grain boundary suppresses the formation of new grains that leads to a hardening response in the stress-strain behaviour which can initiate brittle fracture points. (C) 2021 Hydrogen Energy Publications LLC. Published by Elsevier Ltd. All rights reserved.
  • Article
    Citation - WoS: 13
    Citation - Scopus: 14
    The Effect of Strain Rate on the Hydrogen Embrittlement Susceptibility of Aluminum 7075
    (ASME, 2022-11-22) Baltacioglu, Mehmet Furkan; Cetin, Baris; Bal, Burak
    The effects of changing the strain rate regime from quasi-static to medium on hydrogen susceptibility of aluminum (Al) 7075 were investigated using tensile tests. Strain rates were selected as 1 s(-1) and 10(-3) s(-1) and tensile tests were conducted on both hydrogen uncharged and hydrogen charged specimens at room temperature. Electrochemical hydrogen charging method was utilized and the diffusion length of hydrogen inside Al 7075 was modeled. Material characterizations were carried out by X-ray diffraction (XRD) and energy dispersive X-ray spectroscopy (EDX) and microstructural observations of hydrogen uncharged and hydrogen charged specimens were performed by scanning electron microscope (SEM). As opposed to earlier studies, hydrogen embrittlement (HE) was more pronounced at high strain rate cases. Moreover, hydrogen enhanced localized plasticity (HELP) was the more dominant hydrogen embrittlement mechanism at slower strain rate but coexistence of hydrogen enhanced localized plasticity and hydrogen enhanced decohesion was observed at a medium strain rate. Overall, the current findings shed light on the complicated hydrogen embrittlement behavior of Al 7075 and constitute an efficient guideline for the usage of Al 7075 that can be subject to different strain rate loadings in service.
  • Article
    Citation - WoS: 23
    Citation - Scopus: 24
    Strain Rate and Hydrogen Effects on Crack Growth From a Notch in a Fe-High Steel Containing 1.1 Wt% Solute Carbon
    (Pergamon-Elsevier Science Ltd, 2020-01) Najam, Hina; Koyama, Motomichi; Bal, Burak; Akiyama, Eiji; Tsuzaki, Kaneaki
    Effects of strain rate and hydrogen on crack propagation from a notch were investigated using a Fe-33Mn-1.1C steel by tension tests conducted at a cross head displacement speeds of 10(-2) and 10(-4) mm/s. Decreasing cross head displacement speed reduced the elongation by promoting intergranular crack initiation at the notch tip, whereas the crack propagation path was unaffected by the strain rate. Intergranular cracking in the studied steel was mainly caused by plasticity-driven mechanism of dynamic strain aging (DSA) and plasticity-driven damage along grain boundaries. With the introduction of hydrogen, decrease in yield strength due to cracking at the notch tip before yielding as well as reduction in elongation were observed. Coexistence of several hydrogen embrittlement mechanisms, such as hydrogen enhanced decohesion (HEDE) and hydrogen enhanced localized plasticity (HELP) were observed at and further away from the notch tip resulting in hydrogen assisted intergranular fracture and cracking which was the key reason behind the ductility reduction. (C) 2019 Hydrogen Energy Publications LLC. Published by Elsevier Ltd. All rights reserved.
  • Book Part
    Citation - Scopus: 2
    Potential Effects of Short-Range Order on Hydrogen Embrittlement of Stable Austenitic Steels—A Review
    (Springer Science and Business Media Deutschland GmbH, 2021) Koyama, Motomichi; Bal, Burak; Canadinc, Demircan; Habib, Kishan; Tsuchiyama, Toshihiro; Tsuzaki, Kaneaki; Akiyama, Eiji
    Here, we present a review of the hydrogen embrittlement behavior of face-centered cubic (FCC) alloys with short-range order (SRO) of solute atoms. In this paper, three types of FCC alloys are introduced: Fe–Mn–C austenitic steels, high-nitrogen steels, and CoCrFeMnNi high-entropy alloys. The Fe–Mn–C austenitic steels show dynamic strain aging associated with Mn–C SRO, which causes deformation localization and acceleration of premature fracture even without hydrogen effects. The disadvantageous effect of dynamic strain aging on ductility, which is associated with the deformation localization, amplify plasticity-assisted hydrogen embrittlement. Cr–N and Co–Cr–Ni SRO effects in high-nitrogen austenitic steels and high-entropy alloys enhance the dislocation planarity, which causes stress concentration in the grain interior and near the grain boundaries. The stress concentration coupled with hydrogen effects causes quasi-cleavage and intergranular fractures. © 2021 Elsevier B.V., All rights reserved.
  • Conference Object
    Parameter Analysis of a Biomass Based SOFC-Engine Polygeneration System for Cooling, Heating and Power Production
    (Scanditale AB, 2020) Zhu, Pengfei; Guo, Leilei; Yao, Jing; Ren, Jianwei; Kapci, Mehmet Fazil; Bal, Burak; Zhang, Z. X.
    In order to meet the demand of clean and efficient energy conversion technology, a novel combined cooling, heating and power (CCHP) system fueled by biomass is proposed. This system is consists of biomass gasification unit, solid oxide fuel cell, IC engine unit and absorption refrigeration chiller. Thermodynamic model of the CCHP system are developed and then parameter analysis is adopted to optimize the performance of this system. The effect of air equivalent ratio (ER), steam biomass ratio (S/B) and the fuel utilization factor of SOFC (μ) on the performance of the entire system are studied. The results show that increase of S/B and μ will prompt the electrical efficiency, while the increase of ER has a negative effect on electrical efficiency. The exergy analysis shows that the exergy destruction of biomass gasification process and engine is larger, which is 454.5 kW and 207.2 kW respectively. On the contrary, exergy destruction of SOFC and absorption refrigeration chiller are 15.9 kW and 52.8 kW, respectively. © 2024 Elsevier B.V., All rights reserved.
  • Article
    Citation - WoS: 11
    Citation - Scopus: 13
    On the Detailed Mechanical Response Investigation of PHBV/PCL and PHBV/PLGA Electrospun Mats
    (IOP Publishing Ltd, 2019-03-29) Bal, Burak; Tugluca, Ibrahim Burkay; Koc, Nuray; Isoglu, Ismail Alper
    In this study, electrospun mats of pristine poly(epsilon-caprolactone) (PCL), Poly(D, L-lactide-co-glycolide) (PLGA), poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV), as well as PHBV/PCL blends and PHBV/PLGA blends in different ratios (80:20, 75:25, 50:50, 25:75, 20:80, 10:90, 5:95%, w/w) and Centella Asiatica (CA) loaded (1, 5, 10%, w/v) PHBV/PCL and PHBV/PLGA polyester blends were prepared. Electrospun mats were characterized by scanning electron microscopy (SEM) in order to show uniform and bead and defect-free fiber structure with average diameter. The blend ratio and strain rate dependencies of mechanical behavior of these electrospun membranes were investigated under tensile loading. The tensile tests were conducted at an initial strain rates of 10(-1) s(-1), 10(-2) s(-1), 10(-3) s(-1) and 10(-4) s(-1) at room temperature and the best and worst combinations of PHBV/PLGA, PHBV/PCL blend ratios for both stress and ductility required applications were specified for each strain rate. The effects of blend ratios on the tensile strength and Young's modulus were also investigated. Moreover, the effects of Centella Asiatica on the electrospun membranes' mechanical behavior were demonstrated at different strain rates. Consequently, this study constitutes an important guideline for the selection and usage of the aforementioned electrospun membranes as a wound dressing material in terms of mechanical response at different loading scenarios.
  • Conference Object
    Numerical Study of Magnesium-Based Metal Hydride Reactor Incorporating Multi-Phase Heat Exchanger for Thermal Energy Storage System
    (Scanditale AB, 2021-03-02) Yao, Jing; Zhu, Pengfei; Ren, Jianwei; Kapci, Mehmet Fazil; Bal, Burak; Kurko, Sandra V.; Zhang, Z. X.
    Metal hydride based thermal energy storage system is regarded as a promising method due to its good reversibility, low cost, and no by-product. Multi-phase heat exchange has much higher heat transfer coefficient than single-phase fluid heat exchange, thus facilitating the steam generation. In this study, a two-dimensional model of the metal hydride reactor using multi-phase heat exchange is proposed to estimate the performance and its feasibility of application in the concentrated solar power system. The results show that the velocity of the heat transfer fluid should match well with the thermal conductivity of the metal hydride bed to maintain the heat flux at a relatively constant value. The match of thermal conductivity of 3 or 5 W/(m·K) and fluid velocity of 0.0050 m/s results in the heat flux up to about 19 kW/m2, which is increased by 3 orders of magnitude than single-phase heat exchange. This study helps to facilitate the widespread application of metal hydride based thermal energy storage system in the concentrated solar power system. © 2024 Elsevier B.V., All rights reserved.
  • Article
    Citation - WoS: 2
    Citation - Scopus: 2
    Numerical Investigation of the Role of Volumetric Transformation Strain on the Relaxation Stress and the Corresponding Hydrogen Interstitial Concentration in Niobium Matrix
    (Hindawi Ltd, 2017) Bal, Burak
    The effects of relaxation stress on the hydrogen concentration in Niobium-(Nb-) H media were investigated by iterative numerical modeling approach. To calculate the transformation strain, relaxation stress, and corresponding relaxed hydrogen concentration around an edge dislocation, a new third-order polynomial formulation was utilized in the model. With the aid of this polynomial, hydrogen induced relaxation stress never exceeds the dislocation stress, which indicates that the total stress field never turns to compressive state and diverges the results. The current model calculates the hydrogen concentration not only in the vicinity of an edge dislocation but also far away from the dislocation. Furthermore, the effect of relaxation stress on the interaction energy was also captured in the model. Overall, the current findings shed light on the complicated hydrogen embrittlement mechanisms of metallic materials by demonstrating that hydrogen induced relaxation has a significant effect on the hydrogen atom concentration and the interaction energy between the existing internal stress field and the solute hydrogen atom.