Scopus İndeksli Yayınlar Koleksiyonu
Permanent URI for this collectionhttps://hdl.handle.net/20.500.12573/395
Browse
4 results
Search Results
Article Effects of Strain Rate and Post Processing on Mechanical Properties of Additively Manufactured AlSi10Mg Alloys(Walter de Gruyter GmbH, 2026-01-12) Karaveli, K.K.; Bal, B.The mechanical properties of AlSi10Mg alloy fabricated by laser powder bed fusion (LPBF) were investigated under different strain rates and post-processing conditions, including shot peening (SP) and stress relief (SR). Tensile tests were performed at quasistatic (0.1 s−1) and dynamic (0.015 s−1) strain rates on as-built and post-processed specimens. The results revealed that SP significantly increased the yield strength by 7.10 %, reaching 249.59 MPa, due to the induced compressive residual stresses. However, while SP slightly improved the ultimate tensile strength (UTS) by 0.25 %, it also reduced elongation at break by 18.06 %, indicating a trade-off between strength and ductility. Conversely, SR improved ductility by reducing internal stresses, leading to an elongation at break increase of 574.01 %, with a slight reduction in yield strength. The combination of SP and SR exhibited a synergistic effect, achieving a balance between strength and ductility. Strain rate sensitivity (SRS) analysis indicated that stress-relieved specimens performed better under dynamic loading conditions. These findings highlight the potential of post-processing techniques in tailoring the mechanical behavior of LPBF-produced AlSi10Mg alloys. The balanced properties achieved through combined treatments make this material particularly suitable for high-performance aerospace and automotive applications, where strength and ductility are critical under varying operational conditions. © 2025 Walter de Gruyter GmbH, Berlin/Boston.Article Citation - WoS: 42Citation - Scopus: 45Fracture Behavior of Novel Biomedical Ti-Based High Entropy Alloys Under Impact Loading(Elsevier Science SA, 2021-01) Gurel, S.; Yagci, M. B.; Canadinc, D.; Gerstein, G.; Bal, B.; Maier, H. J.This paper focuses on the mechanical properties and fracture behavior of newly developed body-centered-cubic structured TiTaHfNb, TiTaHfNbZr and TiTaHfMoZr high entropy alloys (HEAs) under impact loading as part of an effort to evaluate their potential utility as implant materials. The experimental findings showed all three Ti based HEAs have lower Young's modulus as compared to the conventionally used implant materials. Fractography analysis revealed that the TiTaHfNb HEA demonstrated significant ductility with the highest energy absorption capacity, while the TiTaHfNbZr and the TiTaHfMoZr alloys exhibited mixed mode fracture with relatively low ductility. Specifically, the reduction of ductility and energy absorption capacity under impact loading was attributed to the addition of Zr and Mo into Ti-based HEA system, which facilitates formation of additional dislocations in the microstructure due to increased lattice distortion. The current findings demonstrate that, from a mechanical point of view, the TiTaHfNb HEA could be considered as an alternative implant material for applications demanding high wear and corrosion resistance, such as hip or knee implants, and thus, warrant further investigation of the biomedical performance of this alloy.YArticle Citation - WoS: 57Citation - Scopus: 63Corrosion Behavior of Novel Titanium-Based High Entropy Alloys Designed for Medical Implants(Elsevier Science SA, 2020-11) Gurel, S.; Yagci, M. B.; Bal, B.; Canadinc, D.This paper reports on the corrosion behavior of three TiTaHf-based high entropy alloys (HEAs) in simulated body fluid (SBF) and artificial saliva (AS) in order to assess their potential utility as implant materials. Specifically, TiTaHfNb, TiTaHfNbZr and TiTaHfMoZr HEAs were subjected to static immersion experiments in SBF and AS, and both the surfaces of the samples and the immersion fluids were thoroughly examined with the state of the art techniques. The experimental results presented herein revealed that the presence of Zr and Nb in the TiTaHf-based samples enhanced corrosion performance with reduced ion release and better surface properties, while Mo addition resulted in an inhomogeneous microstructure, leading to dendrite structures and significant amount of ion release upon immersion in both media. Furthermore, a protective passive layer formation or crystallization was present on all HEA surfaces, implying that corrosion resistance can be sustained in long-term applications. Overall, the set of findings presented herein constitute an early indication of the potential of the TiTaHf-based HEAs to be utilized as implant materials.Article Citation - WoS: 38Citation - Scopus: 42Assessment of Biocompatibility of Novel TiTaHf-Based High Entropy Alloys for Utility in Orthopedic Implants(Elsevier Science SA, 2021-07) Gurel, S.; Nazarahari, A.; Canadinc, D.; Cabuk, H.; Bal, B.This paper presents the findings of experimentally observed corrosion response of novel TiTaHf-based high entropy alloys (HEAs) in fetal bovine serum (FBS) to evaluate their biocompatibility in presence of proteins and potential to be used as implant materials. Particularly, TiTaHfNb, TiTaHfNbZr and TiTaHfMoZr HEAs were subjected to static immersion experiments in FBS media, and both the HEA samples and the immersion fluids underwent thorough characterization. The findings presented herein show that Zr and Mo addition to the TiTaHf solid solution increased the total ion release from the resulting HEAs in FBS, while the TiTaHfNb HEA became prominent in terms of biocompatibility owing to the reduced ion release in FBS. Moreover, hydroxy apatite (HA) formation was evident on the surfaces of all three HEAs upon immersion in FBS, indicating the potential of the three TiTaHf-based HEAs to form desired binding with the human bone. Considering the fact that passive oxide layer formation facilitating lower susceptibility to corrosion in long-term applications was also observed in the studied HEAs, further elaboration on their mechanical and biological responses is warranted for the sake of a comprehensive assessment regarding their utility as orthopedic implant materials.