Scopus İndeksli Yayınlar Koleksiyonu
Permanent URI for this collectionhttps://hdl.handle.net/20.500.12573/395
Browse
22 results
Search Results
Article Rare Earth Elements in the Global Economy: Usage, Recovery, and the Quest for Supply Security – A Review(Springer Heidelberg, 2026) Top, Soner; Ayten, Asim Mustafa; Altiner, Mahmut; Demir, Idris; Kursunoglu, SaitOften described as the vitamins of modern industry, rare earth elements (REEs) are indispensable for the deployment of low-carbon and clean energy technologies. However, ensuring a secure and sustainable REE supply remains a major challenge due to the strong interdependence between application-driven demand, extraction and processing technologies, and the geopolitical concentration of resources. This review adopts an integrated analytical framework in which these three dimensions are treated as interconnected components shaping the resilience of global REE supply chains. First, the major application sectors of REEs are examined to clarify how emerging energy and advanced manufacturing technologies drive demand for specific elements and amplify their strategic importance. Second, extraction and processing technologies are reviewed in relation to both primary and secondary resources, highlighting how technological maturity, process selection, and material characteristics constrain or enable supply expansion. Finally, geopolitical and strategic aspects of the REE supply chain are analyzed to demonstrate how resource concentration, policy instruments, and international dependencies directly influence technological deployment and industrial competitiveness. By explicitly linking application-driven demand, technological pathways for extraction and processing, and geopolitical supply structures within a unified framework, this review provides a coherent understanding of the systemic challenges facing the REE sector and identifies key leverage points for improving the robustness and sustainability of REE supply chains in the context of the global clean energy transition.Article Citation - WoS: 2Citation - Scopus: 2A Novel Biomass-Derived Reductant for Nitric Acid Dissolution of Manganiferous Iron Ore: Comparative Assessment of Organic Reductants(MDPI, 2025-12-31) Top, Soner; Altiner, Mahmut; Vapur, Huseyin; Kursunoglu, Sait; Stopic, SreckoThis study investigates the selective dissolution of manganese from a manganiferous iron ore using nitric acid (HNO3) in the presence of various organic reductants. A series of leaching experiments was performed to evaluate the effects of temperature, reductant type, and leaching time on Mn recovery, with particular emphasis on biomass (horse dung) and tartaric acid as novel reducing agents. The dissolution behaviour of Fe, Mn, Mg, Ca, and Al was systematically examined, revealing that Mn extraction was strongly enhanced in the presence of reductants, while Fe dissolution remained below 10% under all conditions. The maximum Mn dissolution exceeded 90% at 90 degrees C using biomass and reached nearly 85%-90% with tartaric acid at elevated temperatures. Kinetic studies were conducted by applying reaction order models and the shrinking core model. The results indicated that Mn dissolution in HNO3 medium is predominantly controlled by surface chemical reaction, with Arrhenius analysis yielding activation energies of 27.74 kJ/mol for biomass and 21.26 kJ/mol for tartaric acid. These relatively low values confirm the efficiency of organic reductants in facilitating Mn reduction and dissolution. To sum up, comparison of reductant efficiency revealed that, at the lowest concentrations, the dissolution of Mn followed the sequence glucose > sucrose > oxalic acid > tartaric acid > maleic acid > biomass > citric acid > acetic acid. At the highest concentrations, the trend shifted, with citric acid emerging as the most effective, followed by tartaric acid > oxalic acid > glucose > sucrose > maleic acid > biomass > acetic acid.Article Citation - WoS: 1Citation - Scopus: 1A Comprehensive Review on the Extraction and Recovery of Lithium from Primary and Secondary Sources: Advances Toward Battery-Grade Materials(Wiley, 2025-10-20) Top, Soner; Kursunoglu, Sait; Altiner, MahmutLithium-ion battery (LIB) technologies have become indispensable to modern energy systems, driving global demand for high-purity lithium compounds. This review focuses on lithium recovery and purification strategies for battery-grade lithium carbonate (Li2CO3) and lithium hydroxide (LiOH), addressing both primary sources (brines and minerals) and secondary sources (waste materials). Industrially established processes, such as evaporation-based brine treatment and conventional metallurgical methods, are discussed alongside emerging techniques, including membrane separation, solvent extraction, and CO2-assisted precipitation. Particular attention is given to lithium precipitation mechanisms, the behaviour of co-existing ions during extraction, and the specific quality requirements for cathode material synthesis. By evaluating process scalability, environmental impact, and product purity, this review provides a comprehensive understanding of current practices and future directions. Additionally, it highlights the growing importance of lithium in the context of accelerating electric vehicle (EV) adoption, underscoring the bright and expanding future of the lithium industry.Book Part Citation - Scopus: 6Waste Lead-Acid Battery Recycling Technologies(Springer Science and Business Media Deutschland GmbH, 2023) Altiner, Mahmut; Top, S.; Kursunoglu, SaitThe growing of collected waste lead-acid battery quantity means the growing demand for secondary lead (Pb) material for car batteries, both needed for increased cars’ production and for replacing of waste batteries for the increased number of automobiles in service. Pb recycling is critical to keep pace with growing energy storage needs. In recent years, tightening emission regulations have forced many developed country smelters to close. This has driven battery manufacturers and distributors to increasingly rely upon unregulated smelting operations in developing nations, negatively impacting the environment and human health. Therefore, finding a cleaner and more cost-efficient Pb recovery and recycling method is critical to the Pb recycling community. © 2023 Elsevier B.V., All rights reserved.Article Citation - WoS: 16Citation - Scopus: 22Ultrasonic-Assisted Production of Precipitated Calcium Carbonate Particles From Desulfurization Gypsum(Elsevier, 2021-04) Altiner, Mahmut; Top, Soner; Kaymakoglu, BurcinThis study aimed to investigate the effect of ultrasonic application on the production of precipitated calcium carbonate (PCC) particles from desulfurization gypsum via direct mineral carbonation method using conventional and venturi tube reactors in the presence of different alkali sources (NaOH, KOH and NH4OH). The venturi tube was designed to determine the effect of ultrasonication on PCC production. Ultrasonic application was performed three times (before, during, and after PCC production) to evaluate its exact effect on the properties of the PCC particles. Scanning electron microscope (SEM), X-ray diffraction (XRD), Atomic force microscope (AFM), specific surface area (SSA), Fourier transform infrared spectrometry (FTIR), and particle size analyses were performed. Results revealed the strong influence of the reactor types on the nucleation rate of PCC particles. The presence of Na+ or K+ ions in the production resulted in producing PCC particles containing only calcite crystals, while a mixture of vaterite and calcite crystals was observed if NH4+ ions were present. The use of ultrasonic power during PCC production resulted in producing cubic calcite rather than vaterite crystals in the presence of all ions. It was determined that ultrasonic power should be conducted in the venturi tube before PCC production to obtain PCC particles with superior properties (uniform particle size, nanosized crystals, and high SSA value). The resulting PCC particles in this study can be suitably used in paint, paper, and plastic industries according to the ASTM standards.Article Citation - WoS: 7Citation - Scopus: 7Separation of Mn and Fe From a Manganiferous Iron Ore Using Horse Dung as Reductant: A Zero Waste Approach(Springer, 2022-01-13) Top, Soner; Altiner, Mahmut; Kursunoglu, SaitThe separation of manganese and iron from a manganiferous iron ore using horse dung (biomass) as reductant was investigated in a sulfuric acid solution, and 99.80% Mn and 17.76% Fe were extracted into the solution under these leaching conditions: 1 M sulphuric acid concentration, 120 g/L biomass, 1/10 solid to liquid ratio, 300 rev/min stirring speed, 90 degrees C leaching temperature, and 3 h leaching time. In the first precipitation step, the iron and aluminum were first rejected from the solution at pH 5.04. Thereafter, 98.58% Mn was precipitated at pH 10 in the second step. The precipitate was identified as a pyrochroite mineral. After the leaching, the residue was subjected to a carbothermal reduction process conducted at 700 degrees C for 10 min in the presence of no extra reductant. The residue was converted to magnetite mineral, which can be easily recovered by magnetic separation. Based on the experimental results, a flowsheet has been proposed.Article Citation - WoS: 4Citation - Scopus: 3Recovery of Vanadium and Nickel From a High Caco3 Containing Petroleum Coke Ash by Roasting and Acidic Leaching(Springer, 2023-11-08) Yurtseven, Ozgun; Ibrahim, Ahmedaljaali Ibrahim Idrees; Top, Soner; Kursunoglu, Sait; Altiner, MahmutIn this study, it was aimed to extract vanadium (V) and nickel (Ni) from a petroleum coke ash (PCA) using a roasting process without additives, followed by leaching with sulfuric acid (H2SO4). The experiments were designed based on the Taguchi approach, taking into account the parameters of temperature, acid concentration, time, and solid ratio. Additional leaching tests were conducted on the non-roasted PCA for comparison, to assess the effect of roasting on the extractions of V and Ni. The results showed that no extra reducing agent was needed as the PCA contained high levels of CaCO3, which could be used as a reducing agent during roasting. It was found that roasting was essential for high Ni extractions, but had no strong effects on V extractions. The Ni extraction was found to be between 13.3 and 80.8% for the non-roasted PCA and between 43.6 and 99.3% for the roasted PCA. The V extraction was between 36 and 97.9% for the non-roasted PCA and between 45.4 and 99.9% for the roasted PCA. The optimal leaching conditions were determined to be a sulfuric acid of 4.5 M, a solid ratio of 10%, a temperature of 75 degrees C, and a time of 75 min. In addition, it was determined that the leaching conditions had a great effect on the oxidation state of vanadium ions, and an increase in the acid concentration led to the formation of V3+ ions (green color) instead of VO2+ ions (blue color) in the pregnant leach solution. The final pregnant leach solution containing 1056.50 mg/L V, and 251.85 mg/L Ni was achieved with an extraction yields of > 98%. The experimental results were greatly fitted by the shrinking core model and the activation energy (E-a) for V and Ni was calculated as 3.60 and 4.01 kJ/mol, indicating that the leaching mechanism can be explained by the diffusion control model.Article Citation - WoS: 7Citation - Scopus: 7Recovery of Lithium From Spent Coin-Type Lithium Manganese Dioxide Cr Cells by Acidic Leaching in the Presence of Potassium Permanganate as Oxidant(Springer, 2022-09-20) Kursunoglu, Sait; Top, Soner; Altiner, Mahmut; Ozsarac, Safak; Kaya, MuammerThe selective leaching of lithium from spent coin-type lithium manganese dioxide CR cells by oxidative leaching and precipitation of Li2CO3 from Li-bearing leach solution has been experimentally and theoretically investigated. The oxidative leaching experiments were carried out using sulfuric acid in the presence of potassium permanganate (KMnO4). The dissolutions of lithium, manganese, nickel, and cobalt were found to be 84.8%, 0.9%, 46.6%, and 9.7%, respectively. The results demonstrated that a considerable amount of manganese and cobalt remained in the leach residue. The Li-bearing leach solution was fed to an impurity removal stage. It was observed that a substantial amount of lithium loss, along with manganese, nickel, and cobalt, was determined at pH 10. At standard temperature and pressure, the species of lithium as a function of pH, lithium concentration, and carbonate concentration was evaluated for the generation of Li2CO3 from the oxidative leach solution. The results revealed that the precipitation of lithium as lithium carbonate is thermodynamically feasible from the solution at high pHs.Article Citation - WoS: 80Citation - Scopus: 90Properties of Fly Ash-Based Lightweight Geopolymer Concrete Prepared Using Pumice and Expanded Perlite as Aggregates(Elsevier, 2020-02) Top, Soner; Vapur, Huseyin; Altiner, Mahmut; Kaya, Dogan; Ekicibil, AhmetThe present paper aims to utilize the fly ash wastes with lightweight aggregates for geopolymer concrete production process in which sodium hydroxide (NaOH) and sodium metasilicate (Na2SiO3) were used as alkali activators, respectively. The designed experiments were examined by the Yates Analyses and so the productions of geopolymer concrete were investigated depending on curing temperature, solid/liquid rate and concentration of alkali activators. The curing temperature and alkali activator concentration were revealed as effective parameters in geopolymerization. The effects of expanded perlite (EP) and acidic pumice (AP) aggregates were discovered for the production of lightweight geopolymer concretes. The microstructural properties of each produced geopolymer concrete were characterized using SEM, EDS and laser particle size analyses. The specifications of the concrete were evaluated based on their uniaxial compressive strength (UCS), point load strength (PLS), sonic speed (SS), Mohs hardness (MH), and water absorption (WAR) ratio results. In addition, the effects of pre-wetting of EP aggregates, which have hydrophilic nature, were examined. To the best of our knowledge, this is the first time that pre-wetted lightweight EP aggregates were used to produce lightweight GP concretes. As a result of pre-wetting, chemical usage decreased by 32.5%. The UCSs of the lightweight geopolymer concretes were in a range of 10-50MPa and their unit weights changed between 1250 and 1700 kg/m(3). Lighter concretes were obtained by the addition of EP aggregates rather than AP ones. (C) 2019 Elsevier B.V. All rights reserved.Book Part Citation - Scopus: 2Properties of Alkali-Activated Lightweight Concrete(Elsevier, 2022) Top, S.; Altiner, Mahmut; Vapur, HüseyinThis chapter presents a brief overview of the properties of alkali-activated lightweight concrete. Nowadays, the production of lightweight concrete has great attentions due to its extraordinary advantages such as reduced mass, improved sound and thermal insulation properties. Furthermore, the low gas emissions and the utilization of waste materials increase the importance of alkali-activated lightweight concrete. In this chapter, the strengths of lightweight concrete were examined by considering the aggregate type and density, the alkali activator type and concentration, the type of fiber reinforcements and foaming agents, which are the factors that have the most impact on the strengths. Thermal conductivity, fire resistance, acoustic performance, and durability properties have been explained considering the key points in the literature. In addition to porosity, it has been determined that one of the most important factors directly affecting the fire resistance is the precursor type. It has been concluded that the fire resistance of the concrete prepared by using K-based precursors is higher. Acoustic performances of alkali-activated lightweight concrete vary. It is necessary to use a high amount of aggregate in order to obtain concretes with wide frequency ranges and high absorption coefficient. Contrary to concrete produced from Portland cement, alkali-activated concrete is more resistant to acid and sulfate attacks, since the formation of gypsum and strength is less. © 2022 Elsevier B.V., All rights reserved.
- «
- 1 (current)
- 2
- 3
- »