Scopus İndeksli Yayınlar Koleksiyonu
Permanent URI for this collectionhttps://hdl.handle.net/20.500.12573/395
Browse
27 results
Search Results
Article Citation - WoS: 13Citation - Scopus: 13Tuning the Shades of Red Emission in InP/ZnSe Nanocrystals With Narrow Full Width for Fabrication of Light-Emitting Diodes(Amer Chemical Soc, 2023-10-13) Soheyli, Ehsan; Bicer, Aysenur; Ozel, Sultan Suleyman; Tiras, Kevser Sahin; Mutlugun, Evren; Sahin Tiras, KevserWhile Cd-based luminescent nanocrystals (NCs) are the most mature NCs for fabricating efficient red light-emitting diodes (LEDs), their toxicity related limitation is inevitable, making it necessary to find a promising alternative. From this point of view, multishell-coated, red-emissive InP-based NCs are excellent luminescent nanomaterials for use as an emissive layer in electroluminescent (EL) devices. However, due to the presence of oxidation states, they suffer from a wide emission spectrum, which limits their performance. This study uses tris-(dimethyl-amino)-phosphine (3DMA-P) as a low-cost aminophosphine precursor and a double HF treatment to suggest an upscaled, cost-effective, and one-pot hot-injection synthesis of purely red-emissive InP-based NCs. The InP core structures were coated with thick layers of ZnSe and ZnS shells to prevent charge delocalization and to create a narrow size distribution. The purified NCs showed an intense emission signal as narrow as 43 nm across the entire red wavelength range (626-670 nm) with an emission quantum efficiency of 74% at 632 nm. The purified samples also showed an emission quantum efficiency of 60% for far-red wavelengths of 670 nm with a narrow full width of 50 nm. The samples showed a relatively long average emission lifetime of 50-70 ns with a biexponential decay profile. To demonstrate the practical ability of the prepared NCs in optoelectronics, we fabricated a red-emissive InP-based LEDs. The best-performing device showed an external quantum efficiency (EQE) of 1.16%, a luminance of 1039 cd m(-2), and a current efficiency of 0.88 cd A(-1).Article Citation - WoS: 53Citation - Scopus: 59Thickness-Tunable Self-Assembled Colloidal Nanoplatelet Films Enable Ultrathin Optical Gain Media(Amer Chemical Soc, 2020-07-31) Erdem, Onur; Foroutan, Sina; Gheshlaghi, Negar; Guzelturk, Burak; Altintas, Yemliha; Demir, Hilmi VolkanWe propose and demonstrate construction of highly uniform, multilayered superstructures of CdSe/CdZnS core/shell colloidal nanoplatelets (NPLs) using liquid interface self-assembly. These NPLs are sequentially deposited onto a solid substrate into slabs having monolayer-precise thickness across tens of cm(2) areas. Because of near-unity surface coverage and excellent uniformity, amplified spontaneous emission (ASE) is observed from an uncharacteristically thin film having 6 NPL layers, corresponding to a mere 42 nm thickness. Furthermore, systematic studies on optical gain of these NPL superstructures having thicknesses ranging from 6 to 15 layers revealed the gradual reduction in gain threshold with increasing number of layers, along with a continuous spectral shift of the ASE peak (similar to 18 nm). These observations can be explained by the change in the optical mode confinement factor with the NPL waveguide thickness and propagation wavelength. This bottom-up construction technique for thickness-tunable, three-dimensional NPL superstructures can be used for large-area device fabrication.Article Citation - WoS: 6Citation - Scopus: 7Tailored Synthesis of Iron Oxide Nanocrystals for Formation of Cuboid Mesocrystals(Amer Chemical Soc, 2021-08-02) Soran-Erdem, Zeliha; Sharma, Vijay Kumar; Hernandez-Martinez, Pedro Ludwig; Demir, Hilmi VolkanIn this work, we systematically studied the shape- and size-controlled monodisperse synthesis of iron oxide nanocrystals (IONCs) for their use as building blocks in the formation of mesocrystals. For this aim, on understanding the influence of the oleic acid concentration, iron-oleate concentration, and heating rate on the synthesis of robust and reproducible IONCs with desired sizes and shapes, we synthesized highly monodisperse similar to 11 nm sized nanocubes and nanospheres. Magnetic measurements of both cubic and spherical IONCs revealed the presence of mixed paramagnetic and superparamagnetic phases in these nanocrystals. Moreover, we observed that the magnetic moments of the nanocubes are more substantial compared to their spherical counterparts. We then demonstrated a simple magnetic-field-assisted assembly of nanocubes into three-dimensional (3D) cuboid mesocrystals while nanospheres did not form any mesocrystals. These findings indicate that small cubic nanocrystals hold great promise as potential building blocks of 3D magnetic hierarchical structures with their superior magnetic properties and mesocrystal assembly capability, which may have high relevance in various fields ranging from high-density data storage to biomedical applications.Article Citation - WoS: 13Citation - Scopus: 13Sulfobetaine-Based Homo- and Copolymers by Raft: Cross-Linked Micelles and Aqueous Solution Properties(Amer Chemical Soc, 2022-08-04) Gurdap, Seda; Bayram, Nazende Nur; Isoglu, Ismail Alper; Isoglu, Sevil Dincer; Dinçer İşoǧlu, SevilIn this study, we describe the synthesis and aqueous solution behavior of temperature-sensitive N-(3-sulfopropyl)-N-methacroyloxyethyl-N,N-dimethylammonium betaine (SBMA) homopolymers and core cross-linked micelles (CCMs) with an SBMA shell. Reversible addition- fragmentation chain transfer polymerization has been utilized to synthesize sulfobetaine homopolymers, followed by CCM formation during copoly-merization in the presence of an acid-degradable cross-linker. First, SBMA homopolymers of varying chain lengths were synthesized, and it has been demonstrated that an increase in the chain length and concentration of the homopolymer resulted in an increase in the upper critical solution temperature (UCST). Besides, micelles showed concentration-dependent dual temperature-sensitive behavior with UCST and LCST transitions. Also, homopolymers and CCMs were characterized by FTIR, H-1-NMR, GPC, and TEM. Micelle formation and temperature sensitivity were also investigated by DLS. As a result, stabilized micelles were successfully prepared with the motivation of preventing premature drug release and achieving a pH-and temperature-controlled system. Due to their dual-responsive characteristics, the CCMs show promising potential to be used as smart drug carriers for controlled delivery.Article Citation - WoS: 37Citation - Scopus: 39Spectrally Wide-Range Efficient, and Bright Colloidal Light-Emitting Diodes of Quasi-2D Nanoplatelets Enabled by Engineered Alloyed Heterostructures(Amer Chemical Soc, 2020-08-25) Altintas, Yemliha; Liu, Baiquan; Hernandez-Martinez, Pedro Ludwig; Gheshlaghi, Negar; Shabani, Farzan; Sharma, Manoj; Demir, Hilmi VolkanRecently, there has been tremendous interest in the synthesis and optoelectronic applications of quasi-two-dimensional colloidal nanoplatelets (NPLs). Thanks to the ultranarrow emission linewidth, high-extinction coefficient, and high photostability, NPLs offer an exciting opportunity for high-performance optoelectronics. However, until now, the applications of these NPLs are limited to available discrete emission ranges, limiting the full potential of these exotic materials as efficient light emitters. Here, we introduce a detailed systematic study on the synthesis of NPLs based on the alloying mechanisms in core/shell, core/alloyed shell, alloyed core/shell, and alloyed core/alloyed shell heterostructures. Through the engineering of the band gap supported by the theoretical calculations, we carefully designed and successfully synthesized the NPL emitters with continuously tunable emission. Unlike conventional NPLs showing discrete emission, here, we present highly efficient core/shell NPLs with fine spectral tunability from green to deep-red spectra. As an important demonstration of these efficient emitters, the first-time implementation of yellow NPL light-emitting diodes (LEDs) has been reported with record device performance, including the current efficiency surpassing 18.2 cd A(-1), power efficiency reaching 14.8 lm W-1, and record luminance exceeding 46 900 cd m(-2). This fine and wide-range color tunability in the visible range from stable and efficient core/shell NPLs is expected to be extremely important for the optoelectronic applications of the family of colloidal NPL emitters.Article Citation - WoS: 11Citation - Scopus: 13Solution-Processable Indenofluorenes on Polymer Brush Interlayer: Remarkable N-Channel Field-Effect Transistor Characteristics Under Ambient Conditions(Amer Chemical Soc, 2023-08-15) Can, Ayse; Deneme, Ibrahim; Demirel, Gokhan; Usta, HakanThe development of solution-processable n-type molecularsemiconductorsthat exhibit high electron mobility (& mu;(e) & GE;0.5 cm(2)/(V & BULL;s)) under ambient conditions, along withhigh current modulation (I (on)/I (off) & GE; 10(6)-10(7)) andnear-zero turn on voltage (V (on)) characteristics,has lagged behind that of other semiconductors in organic field-effecttransistors (OFETs). Here, we report the design, synthesis, physicochemicaland optoelectronic characterizations, and OFET performances of a libraryof solution-processable, low-LUMO (-4.20 eV) 2,2 & PRIME;-(2,8-bis(3-alkylthiophen-2-yl)indeno[1,2-b]fluorene-6,12-diylidene)dimalononitrile small molecules, & beta;,& beta;& PRIME;-C (n) -TIFDMTs, having varied alkyl chain lengths (n = 8, 12, 16). An intriguing correlation is identifiedbetween the solid-isotropic liquid transition enthalpies andthe solubilities, indicating that cohesive energetics, which are tunedby alkyl chains, play a pivotal role in determining solubility. Thesemiconductors were spin-coated under ambient conditions on denselypacked (grafting densities of 0.19-0.45 chains/nm(2)) ultrathin (& SIM;3.6-6.6 nm) polystyrene-brush surfaces.It is demonstrated that, on this polymer interlayer, thermally induceddispersive interactions occurring over a large number of methyleneunits between flexible alkyl chains (i.e., zipper effect) are criticalto achieve a favorable thin-film crystallization with a proper microstructureand morphology for efficient charge transport. While C-8 and C-16 chains show a minimal zipper effect upon thermalannealing, C-12 chains undergo an extended interdigitationinvolving & SIM;6 methylene units. This results in the formationof large crystallites having lamellar stacking ((100) coherence length & SIM;30 nm) in the out-of-plane direction and highly favorablein-plane & pi;-interactions in a slipped-stacked arrangement. Uninterruptedmicrostructural integrity (i.e., no face-on (010)-oriented crystallites)was found to be critical to achieving high mobilities. The excellentcrystallinity of the C-12-substituted semiconductor thinfilm was also evident in the observed crystal lattice vibrations (phonons)at 58 cm(-1) in low-frequency Raman scattering. Two-dimensionalmicrometer-sized (& SIM;1-3 & mu;m), sharp-edged plate-likegrains lying parallel with the substrate plane were observed. OFETsfabricated by the current small molecules showed excellent n-channelbehavior in ambient with & mu;(e) values reaching & SIM;0.9cm(2)/(V & BULL;s), I (on)/I (off) & SIM; 10(7)-10(8), and V (on) & AP; 0 V. Our study notonly demonstrates one of the highest performing n-channel OFET devicesreported under ambient conditions via solution processing but alsoelucidates significant relationships among chemical structures, molecularproperties, self-assembly from solution into a thin film, and semiconductingthin-film properties. The design rationales presented herein may openup new avenues for the development of high-electron-mobility novelelectron-deficient indenofluorene and short-axis substituted donor-acceptor & pi;-architectures via alkyl chain engineering and interface engineering.Article Citation - WoS: 25Citation - Scopus: 25Self-Resonant Microlasers of Colloidal Quantum Wells Constructed by Direct Deep Patterning(Amer Chemical Soc, 2021-05-24) Gheshlaghi, Negar; Foroutan-Barenji, Sina; Erdem, Onur; Altintas, Yemliha; Shabani, Farzan; Humayun, Muhammad Hamza; Demir, Hilmi VolkanHere, the first account of self-resonant fully colloidal mu-lasers made from colloidal quantum well (CQW) solution is reported. A deep patterning technique is developed to fabricate well-defined high aspect-ratio on-chip CQW resonators made of grating waveguides and in-plane reflectors. The fabricated waveguide-coupled laser, enabling tight optical confinement, assures in-plane lasing. CQWs of the patterned layers are closed-packed with sharp edges and residual-free lifted-off surfaces. Additionally, the method is successfully applied to various nanoparticles including colloidal quantum dots and metal nanoparticles. It is observed that the patterning process does not affect the nanocrystals (NCs) immobilized in the attained patterns and the different physical and chemical properties of the NCs remain pristine. Thanks to the deep patterning capability of the proposed method, patterns of NCs with subwavelength lateral feature sizes and micron-scale heights can possibly be fabricated in high aspect ratios.Article Citation - WoS: 27Citation - Scopus: 29Revisiting the Role of Charge Transfer in the Emission Properties of Carborane-Fluorophore Systems: A TDDFT Investigation(Amer Chemical Soc, 2022-06-05) Tahaoglu, Duygu; Usta, Hakan; Alkan, FahriIn this study, we performed a detailed investigation of the S-1 potential energy surface (PES) of o-carborane-anthracene (o-CB-Ant) with respect to the C-C bond length on o-CB and the dihedral angle between o-CB and Ant moieties. The effects of different substituents (F, Cl, CN, and OH) on carbon- or boron-substituted o-CB, along with a pi-extended acene-based fluorophore, pentacene, on the nature and energetics of S-1 -> S-0 transitions are evaluated. Our results show the presence of a non-emissive S-1 state with an almost pure charge transfer (CT) character for all systems as a result of significant C-C bond elongation (C-C = 2.50-2.56 angstrom) on o-CB. In the case of unsubstituted o-CB-Ant, the adiabatic energy of this CT state corresponds to the global minimum on the S-1 PES, which suggests that the CT state could be involved in emission quenching. Despite large deformations on the o-CB geometry, predicted energy barriers are quite reasonable (0.3-0.4 eV), and the C-C bond elongation can even occur without a noticeable energy penalty for certain conformations. With substitution, it is shown that the dark CT state becomes even more energetically favorable when the substituent shows -M effects (e.g., -CN), whereas substituents showing +M effects (e.g., -OH) can result in an energy increase for the CT state, especially for partially stretched C-C bond lengths. It is also shown that the relative energy of the CT state on the PES depends strongly on the LUMO level of the fluorophore as this state is found to be energetically less favorable compared to other conformations when anthracene is replaced with pi-extended pentacene. To our knowledge, this study shows a unique example of a detailed theoretical analysis on the PES of the S-1 state in o-CB-fluorophore systems with respect to substituents or fluorophore energy levels. Our findings could guide future experimental work in emissive o-CB-fluorophore systems and their sensing/optoelectronic applications.Article Citation - WoS: 18Citation - Scopus: 21Poly(Lauryl Methacrylate)-Grafted Amino-Functionalized Zirconium-Terephthalate Metal-Organic Framework: Efficient Adsorbent for Extraction of Polycyclic Aromatic Hydrocarbons from Water Samples(Amer Chemical Soc, 2020-05-20) Tabatabaii, Maryam; Khajeh, Mostafa; Oveisi, Ali Reza; Erkartal, Mustafa; Sen, UnalIn this study, a novel porous hybrid material, poly(lauryl methacrylate) polymer-grafted UiO-66-NH2 (UiO = University of Oslo), was synthesized for efficient extraction of polycyclic aromatic hydrocarbons (PAHs) from aqueous samples. The polymer end-tethered covalently to the MOF's surface was synthesized by surface-initiated atom transfer radical polymerization, revealing a distinct type of morphology. The adsorbent was characterized by scanning electron microscopy, energy-dispersive spectroscopy, transmission electron microscopy, powder X-ray diffraction, N-2 adsorption-desorption analysis, Fourier transform infrared spectroscopy, and thermogravimetric analysis. The analyses were carried out by gas chromatography-mass spectrometry. Parameters including the type and volume of the eluent, the amount of the adsorbent, and adsorption and desorption times were investigated and optimized. Under optimal conditions, the limit of detection, intraday precision, and interday precision were in the range of 3-8 ng L-1, 1.4-3.1, and 4.1-6.5%, respectively. The procedure was used for analysis of PAHs from natural water samples.Article Citation - WoS: 75Citation - Scopus: 74Perfluoroalkyl-Functionalized Thiazole Thiophene Oligomers as N-Channel Semiconductors in Organic Field-Effect and Light-Emitting Transistors(Amer Chemical Soc, 2014-11-04) Usta, Hakan; Sheets, William Christopher; Denti, Mitchell; Generali, Gianluca; Capelli, Raffaella; Lu, Shaofeng; Facchetti, AntonioDespite their favorable electronic and structural properties, the synthetic development and incorporation of thiazole-based building blocks into n-type semiconductors has lagged behind that of other pi-deficient building blocks. Since thiazole insertion into pi-conjugated systems is synthetically more demanding, continuous research efforts are essential to underscore their properties in electron-transporting devices. Here, we report the design, synthesis, and characterization of a new series of thiazolethiophene tetra- (1 and 2) and hexa-heteroaryl (3 and 4) co-oligomers, varied by core extension and regiochemistry, which are end-functionalized with electron-withdrawing perfluorohexyl substituents. These new semiconductors are found to exhibit excellent n-channel OFET transport with electron mobilities (mu(e)) as high as 1.30 cm(2)/(V center dot s) (I-on/I-off > 10(6)) for films of 2 deposited at room temperature. In contrary to previous studies, we show here that 2,2'-bithiazole can be a very practical building block for high-performance n-channel semiconductors. Additionally, upon 2,2'- and 5,5'-bithiazole insertion into a sexithiophene backbone of well-known DFH-6T, significant charge transport improvements (from 0.0010.021 cm(2)/(V center dot s) to 0.200.70 cm(2)/(V center dot s)) were observed for 3 and 4. Analysis of the thin-film morphological and microstructural characteristics, in combination with the physicochemical properties, explains the observed high mobilities for the present semiconductors. Finally, we demonstrate for the first time implementation of a thiazole semiconductor (2) into a trilayer light-emitting transistor (OLET) enabling green light emission. Our results show that thiazole is a promising building block for efficient electron transport in ?-conjugated semiconductor thin-films, and it should be studied more in future optoelectronic applications.
- «
- 1 (current)
- 2
- 3
- »