Scopus İndeksli Yayınlar Koleksiyonu
Permanent URI for this collectionhttps://hdl.handle.net/20.500.12573/395
Browse
11 results
Search Results
Article Engineering a Bilayered Scaffold as a Potential Cardiac Patch: From Scaffold Design to in Vitro Assessment(Springer Singapore Pte Ltd, 2025-11-24) Yuruk, Adile; Duzler, Ayhan; Isoglu, Sevil Dincer; Isoglu, Ismail AlperIn this study, we developed a novel bilayered scaffold consisting of a bottom layer composed of the Decellularized Bovine Pericardium (DP) coated with Polyaniline Nanoparticles (PANINPs) and a top layer made of an electrospun Poly(lactic-co-glycolic acid)/Gelatin (PLGA/Gel) membrane incorporated with Vascular Endothelial Growth Factor (VEGF) and hawthorn extract. Functionally, the DP supplies native Extracellular Matrix (ECM) components and mechanical support, while PANINPs provide conductivity. The electrospun PLGA/Gel layer mimics fibrous ECM. It incorporates bioactives, with VEGF promoting pro-angiogenic stimulation and hawthorn extract enhancing anticoagulant activity, as well as increasing surface hydrophilicity. The tissue adhesive ensures the interfacial integrity between the two layers. Decellularization efficiency was confirmed histologically using 4 ',6-diamidino-2-phenylindole (DAPI) and Hematoxylin-Eosin (H&E) staining. The DP exhibited a DNA content of 115.9 +/- 47.8 ng/mg DNA, compared to 982.88 +/- 395.42 ng/mg in Native Pericardium (NP). The PANINPs had an average particle size of 104.94 +/- 13.7 nm. The conductivity of PANINPs-coated decellularized pericardium was measured to be 9.093 +/- 8.6 x 10- 4 S/cm using the four-point probe method. PLGA/Gel membranes containing hawthorn extract (1%, 5%, 10%, and 15% w/v) and VEGF (0.1 mu g/mL, 0.5 mu g/mL, and 1 mu g/mL) were fabricated by electrospinning, resulting in fiber diameters between 850 and 1200 nm and pore sizes between 14 and 20 mu m. The anticoagulant efficiency of the membranes containing hawthorn extract reached 430 s in the Activated Partial Thromboplastin Time Assay (aPTT). Mechanical testing revealed a tensile strength of 22.70 +/- 6.33 MPa, an elongation of 53.58 +/- 10.63%, and Young's modulus of 0.67 +/- 0.10 MPa. The scaffold also exhibited over 91% cell viability and excellent cardiomyocyte adhesion. The hemolysis ratio was determined to be 0.421 +/- 0.191%, which confirms its blood compatibility. Our results indicate that the proposed bilayered scaffold can be a promising candidate for cardiac patch applications.Article Citation - WoS: 8Citation - Scopus: 7Raft-Synthesized Poegma-B Block Copolymers: Preparation of Nanosized Micelles for Anticancer Drug Release(Springer, 2021-11-14) Bayram, Nazende Nur; Topuzogullari, Murat; Isoglu, Ismail Alper; Isoglu, Sevil Dincer; Dinçer İşoğlu, SevilTo achieve high stability and biocompatibility in physiological environment, oligoethyleneglycol methacrylate (OEGMA) and 4-vinylpyridine (4VP)-based amphiphilic block copolymers were prepared as micellar carriers to deliver doxorubicin into tumor cells. First, macroinitiator of OEGMA was synthesized by RAFT polymerization at [M](0)/[CTA](0)/[I](0) ratio of 100/1/0.2 in dimethylformamide (DMF) at 70 degrees C, in the presence of 4,4'-azobis(4-cyanovaleric acid) (ACVA) as initiator and 4-cyano-4-(thiobenzoylthio)pentanoic acid (CTA) as chain transfer agent, respectively. It was followed by copolymerization with 4-VP at similar conditions. The formation of RAFT-mediated polymers was approved by FTIR, H-1-NMR and GPC. For the preparation of drug-loaded micelles, a dialysis method was applied and hydrophobic doxorubicin, as a model drug, was entrapped into the micelles. Size distributions and morphologies of drug-loaded micelles were investigated by light scattering and scanning electron microscopy, respectively. Critical micelle concentration was estimated as 0.0019 mg/mL by measuring light scattering intensity in different polymer concentrations. Also, drug loading and entrapment efficiencies were calculated as 4.41% and 17.65% by measuring the DOX amount in the micelles, spectrophotometrically. At last, the drug-loaded micelles were applied to SKBR-3 breast cancer cell lines and revealed up to %40 cell inhibition at 48 and 72 h. As a result, these nanosized and biocompatible micelles can be used for the delivery of hydrophobic drugs, and they can also be modified for further targeting and imaging applications toward specific cancer cells. [GRAPHICS] .Article Citation - WoS: 8Citation - Scopus: 8RAFT-Mediated Synthesis of Poly( N-(2-Hydroxypropyl)Methacrylamide-b-4-vinylpyridine)by Conventional and Microwave Heating(Springer, 2013-06-14) Ozdemir, Zeynep; Topuzogullari, Murat; Isoglu, Ismail Alper; Dincer, SevilWe report the synthesis of N-(2-hydroxypropyl)methacrylamide (HPMA) macroCTA and HPMA-b-4-Vinylpyridine block copolymers via reversible addition-fragmentation chain transfer (RAFT) reaction. Polymerization was carried out in dimethylformamide (DMF) at 70 A degrees C using 4-Cyano-4(thiobenzoylthio) pentanoic acid as chain transfer agent and AIBN as an initiator. Control over molecular weight and composition was achieved by altering the CTA, monomer and initiator feed ratio. The controlled living character of the polymerization was verified with pseudo-first-order kinetic plots, a linear increase of the molecular weight with conversion, and low polydispersities (PDIs a parts per thousand currency sign 1.2). Effect of microwave heating on the homo- and copolymer formation was investigated and the rates were significantly higher than those observed under conventional heating conditions. These polymerization reactions were in controlled fashion resulting in polymers with low PDIs, too. These polymers have a great potential to be used in developing delivery vehicles and conjugates for further drug or gene delivery applications.Article Citation - WoS: 14Citation - Scopus: 15Preparation of Antibacterial Electrospun Poly(D, L-Lactide-co-Glycolide)/Gelatin Blend Membranes Containing Hypericum Capitatum Var. Capitatum(Taylor & Francis As, 2020-05-18) Aksit, Nazende Nur; Gurdap, Seda; Isoglu, Sevil Dincer; Isoglu, Ismail AlperIn this study, we fabricated poly(D, L-lactide-co-glycolide)/gelatin (PLGA/gelatin) membranes containing different amounts of Hypericum capitatum var. capitatum (HCC) extract (1, 5, 7.5, 10 wt%) by electrospinning technique. We investigated chemical, morphological, physical, and mechanical properties as well as in vitro degradation behavior of the electrospun membranes. We also evaluated the antibacterial activity of the electrospun membranes against Escherichia coli and Staphylococcus aureus. Viability, adhesion, and attachment of human fibroblast cells on the electrospun membranes on pre-set days were evaluated by the colorimetric CellTiter 96(R) AQueous One Solution Cell Proliferation Assay (MTS assay), scanning electron microscopy (SEM), and 4',6-Diamidino-2-Phenylindole (DAPI) staining.Article Citation - WoS: 5Citation - Scopus: 5Preparation and Characterization of Viburnum Opulus Containing Electrospun Membranes as Antibacterial Wound Dressing(Korean Fiber Soc, 2023-09-22) Yuruk, Adile; Isoglu, Sevil Dincer; Isoglu, Ismail AlperHerein, we fabricated polycaprolactone/gelatin electrospun membranes possessing different amounts of Viburnum Opulus extract (0, 25, 35, 50%, w/v) as an antibacterial wound dressing. We investigated chemical, morphological, physical, and mechanical properties as well as in vitro degradation behavior of the electrospun membranes. The antibacterial activities of membranes were evaluated against gram-positive Staphylococcus aureus (S. aureus) and gram-negative Escherichia coli (E. coli). The membranes containing Viburnum Opulus exhibited excellent antibacterial activity with the formation of inhibition zones of 25 mm to 36 mm against Escherichia coli and 14 mm to 25 mm against Staphylococcus aureus. The fiber diameters rose from 591 to 1222 nm after adding Viburnum Opulus extract. The extract-containing membranes displayed superior swelling, cell viability, and proliferation properties to neat membranes. Our results showed that the polycaprolactone/gelatin electrospun membranes containing Viburnum Opulus could be a suitable material for wound dressing applications.Article Citation - WoS: 3Citation - Scopus: 3Pericardial Fluid and Vascular Tissue Engineering: A Preliminary Study(Ios Press, 2021-03-23) Sonmezer, Dilek; Latifoglu, Fatma; Toprak, Guler; Duzler, Ayhan; Isoglu, Ismail AlperBACKGROUND: The heart is surrounded by a membrane called pericardium or pericardial cavity. OBJECTIVE: In this study, we investigated the pericardial fluid (PF) for coating polycaprolactone (PCL) scaffolds. PFS, which is a PF component, was used for the coating material. In addition to using PFS for surface coating, MED and fetal bovine serum (FBS) were also used for comparison. METHODS: Pericardial fluid cells (PFSc) isolated from PF were cultured on coated PCL scaffolds for 1, 3, and 5 days. Cell viability was determined using 3-(4, 5-di-methylthiazol- 2-yl)-2, 5-diphenyltetrazolium bromide (MTT) assay. RESULTS: The MTT assay results showed that the viability of cells on PCL scaffold coated with PFS increased over time (P < 0.005), and cell viability was significantly different between PCL scaffolds coated with PFS and non-coated PCL scaffolds. However, cell viability was significantly higher in the PCL scaffolds coated with PFS than non-coated and coated with FBS, MED, and PCL scaffolds. Scanning electron microscopy (SEM) microscopy images and MTT assay indicated that PFSc are attached, proliferated, and spread on PCL scaffolds, especially on PCL scaffolds coated with PFS. CONCLUSIONS: These results suggest that PFS is a biocompatible material for surface modification of PCL scaffolds, which can be used as a suitable material for tissue engineering applications.Article Citation - WoS: 11Citation - Scopus: 13On the Detailed Mechanical Response Investigation of PHBV/PCL and PHBV/PLGA Electrospun Mats(IOP Publishing Ltd, 2019-03-29) Bal, Burak; Tugluca, Ibrahim Burkay; Koc, Nuray; Isoglu, Ismail AlperIn this study, electrospun mats of pristine poly(epsilon-caprolactone) (PCL), Poly(D, L-lactide-co-glycolide) (PLGA), poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV), as well as PHBV/PCL blends and PHBV/PLGA blends in different ratios (80:20, 75:25, 50:50, 25:75, 20:80, 10:90, 5:95%, w/w) and Centella Asiatica (CA) loaded (1, 5, 10%, w/v) PHBV/PCL and PHBV/PLGA polyester blends were prepared. Electrospun mats were characterized by scanning electron microscopy (SEM) in order to show uniform and bead and defect-free fiber structure with average diameter. The blend ratio and strain rate dependencies of mechanical behavior of these electrospun membranes were investigated under tensile loading. The tensile tests were conducted at an initial strain rates of 10(-1) s(-1), 10(-2) s(-1), 10(-3) s(-1) and 10(-4) s(-1) at room temperature and the best and worst combinations of PHBV/PLGA, PHBV/PCL blend ratios for both stress and ductility required applications were specified for each strain rate. The effects of blend ratios on the tensile strength and Young's modulus were also investigated. Moreover, the effects of Centella Asiatica on the electrospun membranes' mechanical behavior were demonstrated at different strain rates. Consequently, this study constitutes an important guideline for the selection and usage of the aforementioned electrospun membranes as a wound dressing material in terms of mechanical response at different loading scenarios.Article Citation - WoS: 2Citation - Scopus: 2Cinnamomum Zeylanicum Extract Incorporated Electrospun Poly(Lactic Acid)/ Gelatin Membrane as a New Wound Dressing(Elsevier, 2025-08) Tarhan, Seray Zora; Pepe, Nihan Aktas; Sen, Alaattin; Isoglu, Ismail AlperIn this study, we fabricated poly(lactic acid)/gelatin electrospun membranes containing various concentrations of Cinnamomum zeylanicum extract and evaluated them as a novel wound dressing. The electrospun membranes were chemically, morphologically, and mechanically characterized, and the results were discussed in comparison with the literature. Electrospun membranes' biodegradability, swelling, and release properties were evaluated, with the CE7.5 membrane having values of 29.60 f 7.20 and 542.1 f 48.3 % and 66.9 %, respectively. Antibacterial activity was observed in CE7.5 and CE10 membranes against E. coli and S. aureus strains. At the highest concentration (CE10), 111.7 f 5.6 % and 96 f 12.375 % cell viability were detected in fibroblasts and differentiated LPS-induced THP-1 cells. Cell viability was further evaluated by Annexin-V/PI staining, revealing that 97.95 f 1.63 % of the cells remained viable in the CE7.5-treated membranes, while only 1.85 f 1.49 % of necrotic cells were detected in the treated cell population. Fibroblasts treated with the CE7.5 membrane showed a 42 % improvement in wound closure compared to non-treated cells. The anti-inflammatory properties of the electrospun membranes were also investigated. Treatment with the conditioned CE7.5 membrane downregulated Tba1 and tau proteins by 45.1 and 51.055 %, respectively. This study concluded that the newly developed Cinnamomum zeylanicum extract incorporated poly(lactic acid)/gelatin electrospun membranes could be a promising wound dressing material.Article Citation - WoS: 5Citation - Scopus: 6Centella Asiaticaextract Containing Bilayered Electrospun Wound Dressing(Korean Fiber Soc, 2020-07) Isoglu, Ismail Alper; Koc, NurayInnovative and bioactive wound dressings prepared by electrospinning mimicking the native structure of the extracellular matrix (ECM) have gained significant interest as an alternative to conventional wound care applications. In this study, bilayered wound dressing material was produced by sequential electrospinning of quaternized poly(4-vinyl pyridine) (upper layer) on theCentella Asiatica(CA) extract containing electrospun poly(D, L-lactide-co-glycolide) (PLGA)/poly(3-hydroxybutyrate-co-3-hydroxy valerate) (PHBV) blend membrane (lower layer). Scanning electron microscopy (SEM) was utilized to show a uniform and bead-free fiber structure of electrospun membranes. The average diameter of CA extract containing electrospun PLGA/PHBV blend membrane was calculated 0.471 +/- 0.11 mu m, whereas the average fiber diameter of electrospun poly(Q-VP) membranes was in the range of 0.460 +/- 0.057 mu m. Chemical, thermal, mechanical properties, and adsorption capacity of electrospun membranes, as well as the cumulative release of CA from the electrospun PLGA/PHBV membrane, were investigated. Viability, adhesion, and attachment of human fibroblast cells on the electrospun membranes on pre-set days were evaluated by the colorimetric CellTiter 96 (R) Aqueous One Solution Cell Proliferation Assay (MTS assay) and SEM. Results revealed that CA loaded bilayered electrospun wound dressing showed promoted attachment and proliferation of fibroblasts. Hence, it can be concluded that CA extract containing bilayered electrospun wound dressing prepared in this study has a promising potential for wound healing applications.Article Citation - WoS: 36Citation - Scopus: 40Advances in Micelle-Based Drug Delivery: Cross-Linked Systems(Bentham Science Publ Ltd, 2017-04-04) Isoglu, Ismail Alper; Ozsoy, Yildiz; Isoglu, Sevil DincerThere are several barriers that drug molecules encounter in body beginning from kidney filtration and reticulo-endothelial system (RES) clearance to cellular trafficking. Multifunctional nanocarriers have a great potential for the delivery of drugs by enhancing therapeutic activity of existing methodologies. A variety of nanocarriers are constructed by different material types, which have unique physicochemical properties for drug delivery applications. Micelles formed by amphiphilic polymers are one of the most important drug/nanocarrier formulation products, in which the core part is suitable for encapsulation of hydrophobic agent whereas the outer shell can be utilized for targeting the drug to the disease area. Micelles as self-assembled nanostructures may encounter difficulties in biodistribution of encapsulated drugs because they have a tendency to be dissociated in dilution or high ionic strength. Therefore, therapeutic efficiency is decreased and it requires high amount of drug to be administered to achieve more efficient result. To overcome this problem, covalently stabilized structures produced by cross-linking in core or shell part, which can prevent the micelle dissociation and regulate drug release, have been proposed. These systems can be designed as responsive systems in which cross-links are degradable or hydrolysable under specific conditions such as low pH or reductive environment. These are enhancing characteristics in drug delivery because their cleavage allows the release of bioactive agent encapsulated in the carrier at a certain site or time. This review describes the chemical methodologies for the preparation of cross-linked micelles, and reports an update of latest studies in literature.