WoS İndeksli Yayınlar Koleksiyonu
Permanent URI for this collectionhttps://hdl.handle.net/20.500.12573/394
Browse
7 results
Search Results
Article Performance Boost in QLEDs Using Octanethiol-Capped Core/Shell Quantum Dots(IOP Publishing Ltd, 2026-01-07) Yazici, Ahmet F.; Yuruc, Adnan M.; Kelestemur, Yusuf; Serin, Ramis Berkay; Kacar, Rifat; Ulku, Alper; Mutlugun, EvrenQuantum dots attract significant attention as one of the most promising colloidal nanocrystals with unique optical properties and potential applications for the next generation of display technology. In this paper, we evaluate the performance of CdZnSeS-based alloyed-shell quantum dots (QDs) for electroluminescence devices upon additional shell growth and ligand exchange. This includes core/shell (C/S) and core/shell/shell (C/S/S) QDs, whose latter includes an additional ZnS shell and octanethiol (OT) ligands. We present detailed characterizations of QDs using transmission electron microscopy, XRD, and various spectroscopic techniques and demonstrate their QD light emitting (QLEDs). We find the photoluminescence quantum yield of C/S/S QDs increased from 68.8% to 88.7% compared to C/S QDs whereas the emission linewidth narrows from 22.2 nm to 20.8 nm. QLEDs fabricated with C/S/S QDs exhibit a higher peak external quantum efficiency (EQE) of 4.1% and maximum luminance of 85 000 cd m-2, compared to 2.3% EQE and 67 000 cd m-2 for C/S QLEDs. In this respect, the OT-assisted shell growth significantly improves the optical property of QDs and performance of QLEDs, likely attributed to the enhanced charge balance and increased radiative recombination rate.Article Citation - WoS: 13Citation - Scopus: 13Tuning the Shades of Red Emission in InP/ZnSe Nanocrystals With Narrow Full Width for Fabrication of Light-Emitting Diodes(Amer Chemical Soc, 2023-10-13) Soheyli, Ehsan; Bicer, Aysenur; Ozel, Sultan Suleyman; Tiras, Kevser Sahin; Mutlugun, Evren; Sahin Tiras, KevserWhile Cd-based luminescent nanocrystals (NCs) are the most mature NCs for fabricating efficient red light-emitting diodes (LEDs), their toxicity related limitation is inevitable, making it necessary to find a promising alternative. From this point of view, multishell-coated, red-emissive InP-based NCs are excellent luminescent nanomaterials for use as an emissive layer in electroluminescent (EL) devices. However, due to the presence of oxidation states, they suffer from a wide emission spectrum, which limits their performance. This study uses tris-(dimethyl-amino)-phosphine (3DMA-P) as a low-cost aminophosphine precursor and a double HF treatment to suggest an upscaled, cost-effective, and one-pot hot-injection synthesis of purely red-emissive InP-based NCs. The InP core structures were coated with thick layers of ZnSe and ZnS shells to prevent charge delocalization and to create a narrow size distribution. The purified NCs showed an intense emission signal as narrow as 43 nm across the entire red wavelength range (626-670 nm) with an emission quantum efficiency of 74% at 632 nm. The purified samples also showed an emission quantum efficiency of 60% for far-red wavelengths of 670 nm with a narrow full width of 50 nm. The samples showed a relatively long average emission lifetime of 50-70 ns with a biexponential decay profile. To demonstrate the practical ability of the prepared NCs in optoelectronics, we fabricated a red-emissive InP-based LEDs. The best-performing device showed an external quantum efficiency (EQE) of 1.16%, a luminance of 1039 cd m(-2), and a current efficiency of 0.88 cd A(-1).Article Citation - WoS: 1Citation - Scopus: 1Osmotic-Pressure Nematic Ordering in Suspensions of Laponite and Carboxy Methyl Cellulose(Amer Chemical Soc, 2020-10-12) Xu, Peicheng; Yazici, Ahmet F.; Erdem, Talha; Lekkerkerker, Henk N. W.; Mutlugun, Evren; Eiser, ErikaLaponite is a synthetic clay that is known to form gels in aqueous suspensions at low concentrations (0.01 g/cm(3)) Although it is expected to form lyotropic liquid crystals, such phases usually do not form, as a consequence of laponite's tendency to form gels at concentrations below the threshold for liquid crystal formation. Here we show that macroscopic, birefringent phases of laponite can be prepared through osmotic compression of a laponite solution by an aqueous solution of carboxy methyl cellulose (CMC). We present polarization imaging studies showing how the initially dilute, isotropic laponite phase shrinks while developing typical birefringence colors between crossed polarizers. Using the MichelLevy interference charts, we were able to extract the refractive index and orientation of the laponite nanodisks in the compressed region. Our observations allow us to propose a tentative state diagram, indicating the concentration regions for which we obtain optically anisotropic gels.Article Citation - WoS: 88Citation - Scopus: 85Highly Stable, Near-Unity Efficiency Atomically Flat Semiconductor Nanocrystals of CdSe/ZnS Hetero-Nanoplatelets Enabled by ZnS-Shell Hot-Injection Growth(Wiley-VCH Verlag GmbH, 2019-01-30) Altintas, Yemliha; Quliyeva, Ulviyya; Gungor, Kivanc; Erdem, Onur; Kelestemur, Yusuf; Mutlugun, Evren; Demir, Hilmi VolkanColloidal semiconductor nanoplatelets (NPLs) offer important benefits in nanocrystal optoelectronics with their unique excitonic properties. For NPLs, colloidal atomic layer deposition (c-ALD) provides the ability to produce their core/shell heterostructures. However, as c-ALD takes place at room temperature, this technique allows for only limited stability and low quantum yield. Here, highly stable, near-unity efficiency CdSe/ZnS NPLs are shown using hot-injection (HI) shell growth performed at 573 K, enabling routinely reproducible quantum yields up to 98%. These CdSe/ZnS HI-shell hetero-NPLs fully recover their initial photoluminescence (PL) intensity in solution after a heating cycle from 300 to 525 K under inert gas atmosphere, and their solid films exhibit 100% recovery of their initial PL intensity after a heating cycle up to 400 K under ambient atmosphere, by far outperforming the control group of c-ALD shell-coated CdSe/ZnS NPLs, which can sustain only 20% of their PL. In optical gain measurements, these core/HI-shell NPLs exhibit ultralow gain thresholds reaching approximate to 7 mu J cm(-2). Despite being annealed at 500 K, these ZnS-HI-shell NPLs possess low gain thresholds as small as 25 mu J cm(-2). These findings indicate that the proposed 573 K HI-shell-grown CdSe/ZnS NPLs hold great promise for extraordinarily high performance in nanocrystal optoelectronics.Article Citation - WoS: 6Citation - Scopus: 6Electrochemical and Optical Multi-Detection of Escherichia Coli Through Magneto-Optic Nanoparticles: A Pencil-on Biosensor(MDPI, 2024-12-10) Soysaldi, Furkan; Ekici, Derya Dincyurek; Soylu, Mehmet cagri; Mutlugun, Evren; Dincyurek Ekici, DeryaEscherichia coli (E. coli) detection suffers from slow analysis time and high costs, along with the need for specificity. While state-of-the-art electrochemical biosensors are cost-efficient and easy to implement, their sensitivity and analysis time still require improvement. In this work, we present a paper-based electrochemical biosensor utilizing magnetic core-shell Fe2O3@CdSe/ZnS quantum dots (MQDs) to achieve fast detection, low cost, and high sensitivity. Using electrochemical impedance spectroscopy (EIS) as the detection technique, the biosensor achieved a limit of detection of 2.7 x 10(2) CFU/mL for E. coli bacteria across a concentration range of 10(2)-10(8) CFU/mL, with a relative standard deviation (RSD) of 3.5781%. From an optical perspective, as E. coli concentration increased steadily from 10(4) to 10(7) CFU/mL, quantum dot fluorescence showed over 60% lifetime quenching. This hybrid biosensor thus provides rapid, highly sensitive E. coli detection with a fast analysis time of 30 min. This study, which combines the detection advantages of electrochemical and optical biosensor systems in a graphite-based paper sensor for the first time, has the potential to meet the needs of point-of-care applications. It is thought that future studies that will aim to examine the performance of the production-optimized, portable, graphite-based sensor system on real food samples, environmental samples, and especially medical clinical samples will be promising.Article Citation - WoS: 49Citation - Scopus: 49Colloidal Quantum Dot Light-Emitting Diodes Employing Phosphorescent Small Organic Molecules as Efficient Exciton Harvesters(Amer Chemical Soc, 2014-08-04) Mutlugun, Evren; Guzelturk, Burak; Abiyasa, Agus Putu; Gao, Yuan; Sun, Xiao Wei; Demir, Hilmi VolkanNonradiative energy transfer (NRET) is an alternative excitation mechanism in colloidal quantum dot (QD) based electroluminescent devices (QLEDs). Here, we develop hybrid highly spectrally pure QLEDs that facilitate energy transfer pumping via NRET from a phosphorescent small organic molecule-codoped charge transport layer to the adjacent QDs. A partially codoped exciton funnelling electron transport layer is proposed and optimized for enhanced QLED performance while exhibiting very high color purity of 99%. These energy transfer pumped hybrid QLEDs demonstrate a 6-fold enhancement factor in the external quantum efficiency over the conventional QLED structure, in which energy transfer pumping is intrinsically weak.Article Citation - WoS: 51Citation - Scopus: 53CdSe/ZnS Quantum Dot Films for High Performance Flexible Lighting and Display Applications(IOP Publishing Ltd, 2016-06-10) Altintas, Yemliha; Genc, Sinan; Talpur, Mohammad Younis; Mutlugun, EvrenColloidal quantum dots have attracted significant interest in recent years for lighting and display applications and have recently appeared in high-end market products. The integration of quantum dots with light emitting diodes has made them promising candidates for superior lighting applications with tunable optical characteristics. In this work we propose and demonstrate high quality colloidal quantum dots in their novel free-standing film forms to allow high quality white light generation to address flexible lighting and display applications. High quality quantum dots have been characterized using transmission electron microscopy, x-ray diffraction, x-ray photoelectron spectroscopy, steady state and time resolved photoluminescence and dynamic light scattering methods. The engineering of colloidal quantum dot composition and its optical properties in stand-alone film form has led to the experimentally high NTSC color gamut of 122.5 (CIE-1931) for display applications, color rendering index of 88.6, luminous efficacy of optical radiation value of 290 lm/W-opt and color temperature of 2763 K for lighting applications.