WoS İndeksli Yayınlar Koleksiyonu
Permanent URI for this collectionhttps://hdl.handle.net/20.500.12573/394
Browse
10 results
Search Results
Article Citation - WoS: 30Citation - Scopus: 37Testing of 17-Different Leaching Agents for the Recovery of Zinc From a Carbonate-Type Pb-Zn Ore Flotation Tailing(Pergamon-Elsevier Science Ltd, 2021-07) Hussaini, Shokrullah; Kursunoglu, Sait; Top, Soner; Ichlas, Zela Tanlega; Kaya, MuammerThe recovery of zinc from a flotation tailing using 17-different leaching agents, including inorganic and organic acids, alkaline solutions and chelating agents, was investigated. The effects of the lixiviant type, acid concentration, leaching temperature, leaching time, and solid-to-liquid ratio on the metals dissolution were studied. The use of sulfuric acid resulted in 91% of zinc extraction with a high selectivity against lead. The major impurities of lead, iron, calcium and arsenic precipitated during the leaching process as a segnisite, beudantite, gypsum, and goethite in this lixiviant. It was seen that the addition of oxidants in sulfuric acid solution slightly increased zinc dissolution. The citric acid dissolved 90.1% of zinc along with 9.1% lead. 90% of zinc dissolution was achieved by using malic acid, and high selectivity between zinc and lead dissolutions was also observed. The citric and malic acid leach residues contained a substantial amount of segnitite, beudantite, and quartz as the major phases. In term of zinc and lead dissolution selectivity, the best inorganic agents were determined in the following order: sulfuric acid > hydrochloric acid > perchloric acid > nitric acid. With organic agents, the best zinc and lead selectivity was achieved in the following order: sulfosalicylic acid > citric acid > malic acid > formic acid > tartaric acid > ascorbic acid. The best simultaneous zinc and lead dissolutions were achieved using sodium hydroxide agent. Using 5 M sodium hydroxide at 80 degrees C and 1/10 solid-to-liquid ratio for 180 min. leaching time, 81.4% of zinc and 47.4% of lead were dissolved while leaving a considerable amount of iron in the residue. When the ammonium chloride was used as a lixiviant, the silver and zinc were taken into the leach solution. 61.3% of zinc dissolution was obtained by using 50% ammonia as lixiviant, whereas no iron and lead dissolutions were observed. Using 0.37 M EDTA at 80 degrees C, 1/10 solid-to-liquid ratio for 180 min. leaching time, more than 90% of zinc dissolved along with a substantial amount of iron, arsenic and lead co-dissolutions. 47.4% of zinc dissolution was obtained at 80 degrees C and 1/10 solid-to-liquid ratio for 180 min. leaching time when sodium citrate was used as lixiviant, whereas less than 20% of zinc dissolved using ammonium oxalate at similar leaching condition. 39% zinc was dissolved using 3 M ammonium acetate at 80 degrees C, 1/10 solid-to-liquid ratio for 180 min., while 23.1% of zinc dissolution was achieved when the ammonium acetate was tested under similar experimental conditions. As a result, sulfuric, citric, malic, sulfosalicylic and formic acids were deemed to be the most promising leaching agents for the selective recovery of zinc from the lead-zinc flotation tailing.Article Citation - WoS: 62Citation - Scopus: 68Solvent Extraction Process for the Recovery of Nickel and Cobalt From Caldag Laterite Leach Solution: The First Bench Scale Study(Elsevier Science Bv, 2017-05) Kursunoglu, Sait; Ichlas, Zela Tanlega; Kaya, MuammerA solvent extraction application consisting of two-sequential solvent extraction circuits to separate the nickel and cobalt from a synthetic sulphate leach solution which simulates a typical Caldag lateritic leach solution was conceived and experimentally explored. The first circuit allowed the simultaneous extraction of most of the nickel (98%), cobalt (98%) and manganese (94%) with 20% neodecanoic acid (Versatic 10) and 5% tri-n-butyl phosphate (TBP) in ShellSol 2046 at pH 72 together with substantial amounts of calcium (65%) and magnesium (12%). Three stages of scrubbing at pH 5.6 using diluted sulphuric acid solution allowed the removal of most of the magnesium (90%) and substantial amount of calcium (16%). Complete stripping of nickel, cobalt, manganese, magnesium and calcium was achieved at pH 0.75. This loaded strip solution was the feed for the second circuit. The use 15% bis(2,4,4-trimethylpentyl) phosphinic acid (Cyanex 272) and 5% TBP in ShellSol 2046 allowed the extraction of most of the cobalt (94%) and manganese (98%) at pH 5.0 but with substantial co-extraction of magnesium (41%) and calcium (40%) and a minor amount of nickel (3%). A two-stage scrubbing of this loaded organic with cobalt (20 g L-1) solution was performed. Magnesium, calcium and nickel were completely displaced with cobalt. Most of the manganese (93%) was removed from the organic. Complete stripping of the cobalt and manganese in the scrubbed organic phase was achieved at pH 1.0. Therefore, nickel (94%) and cobalt (91%) were totally separated from the feed solution. In addition, slope analyses were carried out to determine the nature of the extracted complexes of the nickel and cobalt with each extractant. Based on the experimental results, a flowsheet for the separation process is presented. (C) 2017 Elsevier B.V. All rights reserved.Article Citation - WoS: 37Citation - Scopus: 44Selection of an Appropriate Acid Type for the Recovery of Zinc From a Flotation Tailing by the Analytic Hierarchy Process(Elsevier Sci Ltd, 2021-02) Kursunoglu, Sait; Kursunoglu, Nilufer; Hussaini, Shokrullah; Kaya, MuammerThe selection of acid type for metal dissolution from minerals is an important issue in leaching operations. Acids are used to recover valuable elements from the minerals by dissolving them in a solution. The acid must offer a high recovery at marginal cost and a low environmental effect. Many parameters can affect the acid type selection for high leaching recovery and low environmental effect and thus, the selection of an acid type is complex. In this study, based on the experimental results obtained from the bench-scale laboratory studies, the selection of acid type for the recovery of zinc from a flotation tailing was investigated using the analytic hierarchy process (AHP). The utilization of AHP was supported by the use of ExpertChoice (R) 2000 software. The outcomes demonstrated that sulfuric acid is the most desirable acid type with a ranking of 0.541, tracked by citric acid, and oxalic acid with scoring of 0.282 and 0.177, respectively. Furthermore, analyses of sensitivity were performed to examine the influence of the main criteria on the different acid type. It emerged that citric acid can be used when the environmental main criterion ascended from 7.8% to 75.3%. (C) 2020 Elsevier Ltd. All rights reserved.Article Citation - WoS: 16Citation - Scopus: 19Recovery of Zinc and Lead from Yahyali Non-Sulphide Flotation Tailing by Sequential Acidic and Sodium Hydroxide Leaching in the Presence of Potassium Sodium Tartrate(Elsevier, 2020-12) Kursunoglu, Sait; Top, Soner; Kaya, MuammerThe recovery of zinc and lead from Yahyali non-sulphide flotation tailing using sulfuric acid followed by sodium hydroxide leaching in the presence of potassium sodium tartrate was experimentally investigated. In the acidic leaching stage, the effects of pH, solid-to-liquid ratio and temperature on the dissolution of zinc from the tailing were explored. 82.3% Zn dissolution was achieved at a pH of 2, a temperature of 40 degrees C, a solid-to-liquid ratio of 20% and a leaching time of 2 h, whereas the iron and lead dissolutions were determined to be less than 0.5%. The sulfuric acid consumption was found to be 110.6 kg/t (dry tailing). The leaching temperature had no beneficial effect on the dissolution of zinc from the tailing. The acidic leach solution was subjected to an electrowinning test. The cathode product consisted of 99.8% Zn and 0.15% Fe. In the alkaline leaching stage, the Pb dissolution increased slightly in the presence of potassium sodium tartrate. More than 60% of Pb was taken into the leach solution when the leaching temperature increased from 40 to 80 degrees C. The final leach residue was analyzed by XRD and XRF. The XRD results indicated that the major peaks originated from the goethite and quartz while minor peaks stem from smithsonite and cemssite. The XRF analysis demonstrated that the residue contained 70.3% iron oxide. Based on the sequential leaching experiments, the zinc and lead were excellently depleted from the flotation tailing, leaving a considerable amount of iron in the final residue.Article Citation - WoS: 10Citation - Scopus: 11Production of Mn3O4 Nanoparticles From a Manganiferous Iron Ore via Reductive Leaching, Precipitation, and Calcination(Elsevier, 2022-02) Altiner, Mahmut; Top, Soner; Bouchekrit, Chafia; Kursunoglu, SaitThe synthesis of Mn3O4 nanoparticles from a manganiferous iron ore through reductive leaching, precipitation, and calcination was investigated. The reductive leaching results showed that Mn (99.9%) was almost completely extracted into the leaching solution along with a substantial amount of Mg (99.9%), Al (99.5%), Ca (80%), and Fe (22.9%) under the following conditions: 30 g/L tartaric acid as a reducing agent, 1 M HCl solution, leaching temperature of 90 ?, and leaching duration of 3 h. In the first precipitation step, Fe and Al were expelled from the pregnant leach solution by the addition of NaOH prior to conducting the precipitation experiments for the production of manganese carbonate (MnCO3) particles from the purified solution. In the second precipitation step, MnCO3 particles were produced using sodium carbonate (Na2CO3) as the precipitating agent. The effects of parameters such as reaction temperature, Na2CO3 concentration, and experimental duration were investigated using the Taguchi approach. Manganse(II) was precipitated in the form of MnCO3 particles (97.4%) under the following conditions: a temperature of 30 ?C, Na2CO3 concentration of 0.014 mol/L, and duration of 30 min. The precipitate was observed to have a structure similar to that of rhodochrosite (MnCO3). Thermogravimetric/ differential thermal analyses were subsequently performed in three different atmospheres (air, oxygen, and nitrogen) to select a suitable atmosphere for calcination. The experimental results indicated the formation of hausmannite (Mn3O4) with a purity of 97.5% Mn3O4, 0.42% MgO, 1.66% CaO, and 0.34% FeO. The specific surface area, particle size, Curie temperature, magnetisation, coercivity, and remanence ratio of the final product obtained via 3 h of calcination at 350 C were estimated to be 133.3 m(2)/g, < 142.2 nm, 56 K, 10.10 Am-2/kg, 0.35 T, and 0.19, respectively. The characterisation results revealed the excellent low-temperature ferromagnetic properties of the produced Mn3O4 nanoparticles.Article Citation - WoS: 6Citation - Scopus: 6Production of High-Grade Antimony Oxide From Smelter Slag via Leaching and Hydrolysis Process(Elsevier, 2025-02) Ibrahim, Ahmedaljaali Ibrahim Idrees; Aboelgamel, Muhammed; Soylu, Kartal Kaan; Top, Soner; Kursunoglu, Sait; Altiner, Mahmut; Ibrahim Idrees Ibrahim, Ahmedaljaali; Kaan Soylu, KartalThis study aimed to investigate the recovery of antimony (Sb) from slag generated in an antimony smelting plant using leaching followed by hydrolysis processes. The leaching behaviors of rare earth elements (REEs) were also examined. The physicochemical properties of the slag were determined using various analytical techniques. The slag (4.12 % Sb) was mainly composed of quartz and minor minerals, including microline, magnetite, heden-bergite, and stibiconite. The Sb types in the slag determined by XPS were found to be in the oxide form. The concentrations of REEs (La, Y, Ce, and Nd) in the slag were 169.21 g/t. Preliminary leaching experiment results indicate that (i) HCl was selected rather than other acids due to its high extraction ability on the Sb from the slag, (ii) a sample with a d50 of <25 mu m should be used, (iii) the slurry should be mixed at 300 rpm. In the following leaching tests, the effects of leaching parameters (HCl acid concentration, amount of tartaric acid, solid-to-liquid ratio, reaction temperature, and time) on the extraction rates of Sb, impurities, and REEs were investigated. At the best leaching conditions (HCl: 8 M, amount of tartaric acid: 1 g/L, stirring speed: 300 rpm, reaction tem-perature: 75 C-degrees, and time: 180 min), the extraction rates of Sb from the slag were determined to be 91.19 %, but the extraction rates of REEs were measured to be <= 50 %. The activation energy (Ea) for Sb leaching was found to be 46.75 kJ/mol, indicating that the reaction was governed by the chemically controlled mechanism. In particular, it was understood from the additional experimental results that the leaching procedure should be carried out for 20 h to extract La with an extraction rate of >90 %. However, the extraction rate of Sb was negligible in extended times. It was determined that using tartaric acid positively affected La's leaching mech-anism, and the required leaching time for La decreased to 180 min from 20 h with the increase of tartaric acid from 1 g/L to 6 g/L. Hydrolysis tests were conducted using the Taguchi approach (L32, 2<^>1 4<^>3). The effects of the alkaline type (NH4OH and NaOH), stirring speed (100, 200, 300, and 400 rpm), temperature (50, 60, 70, and 80 C-degrees), and pH (1.5, 2, 2.5, and 3) on the precipitation of Sb from the PLS were investigated. NH4OH was suggested for use in the hydrolysis test to obtain precipitates with higher purities. The product obtained under the optimal conditions comprised 81.43 % Sb, 16.23 % O, and 2.34 % Fe. The product was identified as antimony oxide by XRDArticle Citation - WoS: 14Citation - Scopus: 18Pb-Zn Recovery From a Malic Leach Solution of a Carbonate Type Ore Flotation Tailing by Precipitation and Solvent Extraction(Elsevier, 2021-10) Hussaini, Shokrullah; Tita, Angela Manka; Kursunoglu, Sait; Top, Soner; Ichlas, Zela Tanlega; Kar, Umut; Kaya, MuammerThe recovery of zinc and lead from a malic leach solution of a carbonate type ore flotation tailing by precipitation with sulfuric acid followed by solvent extraction using di(2-ethylhexyl)phosphoric acid (D2EHPA) as extractant was investigated. The separation of lead via precipitation was essentially complete from the malic acid leach solution by adding sulphuric acid to reach a pH of 0.25 at 25 degrees C. The precipitate product was identified by XRD as anglesite (PbSO4). The pregnant leach solution after lead precipitation was then subjected to solvent extraction using D2EHPA. The optimum solvent extraction conditions were determined as 10% D2EHPA concentration, 25 degrees C temperature, 10 min contact time and phase ratio of unity. Under these conditions, 99.3% of zinc was extracted into the organic phase at a pH of 4.2 in a single contact alongside a substantial amount of Ca (76.6%), and minor amounts of Fe (19.2%) and Mg (18%). Complete stripping of zinc and calcium from the loaded organic solution along with 47.8% of Mg was achieved at a pH 0.5 under room temperature. No iron stripping was observed from the loaded organic. The zinc content in the loaded strip solution could be enriched and then sent to the electrowinning (EW) stage. It is noted that the calcium and magnesium impurities in the loaded strip solution had no adverse effect on the zinc EW process. Based on the experimental results, a flowsheet was proposed for the recovery of Pb and Zn from the malic acid leach solution. With the proposed precipitation and solvent extraction process, two different material streams are produced.Article Citation - WoS: 15Citation - Scopus: 20Leaching Method Selection for Caldag Lateritic Nickel Ore by the Analytic Hierarchy Process (AHP)(Elsevier, 2017-08) Kursunoglu, Sait; Ichlas, Zela Tanlega; Kaya, MuammerLeaching is an important process in hydrometallurgical operations. This process is used to extract metals from the ores by dissolving them in a lixiviant. It is desired that the leaching method is able to provide high extraction rate at minimal capital and operational costs. There are many parameters that can affect the leaching efficiency and thus, the process of selecting a leaching method is complex. In this study, the use of Analytic Hierarchy Process (AHP) method to select an appropriate leaching method for Caldag lateritic nickel ore has been performed. The application of AHP is assisted with the use of ExperChoice 2000 (R) Software. The results shown that heap leaching (HL) is the most attractive leaching method with a rating of 0.592, followed by atmospheric leaching (AL), and high pressure acid leaching (HPAL) with ratings of 0.293 and 0.115, respectively. In addition, sensitivity analyses have been applied to investigate the impact of the main criteria on the alternative leaching methods. It was found that HPAL can be selected when economical main criteria decreased from 76.1% to 16.3%.Article Citation - WoS: 15Citation - Scopus: 18Dissolution of Lateritic Nickel Ore Using Ascorbic Acid as Synergistic Reagent in Sulphuric Acid Solution(Elsevier Science Bv, 2018-08) Kursunoglu, Sait; Ichlas, Zela Tanlega; Kaya, MuammerThe dissolution of nickel and cobalt from Caldag lateritic nickel ore using the combination of sulphuric and ascorbic acids was investigated. The use of other organic acids, namely citric, maleic and stearic acids, as synergistic reagents was studied for comparison. The results revealed that the use of ascorbic and citric acids markedly improved the dissolution of cobalt compared to the other two organic acids that only showed slight synergistic effect on the leaching rate. In terms of nickel dissolution, ascorbic acid is the most effective synergist, followed by citric, maleic and stearic acids in descending order. Under the most optimized conditions found in this study, i.e., using 1 mol/L of sulphuric acid with the presence of 4 g/L of ascorbic acid at 80 degrees C and solid-to-liquid ratio of 1/10, more than 99% and 98% leaching rates of cobalt and nickel, respectively, can be achieved within 4 h of leaching. In addition, the leaching performance is relatively insensitive to the change of ascorbic acid concentration from 2 to 4 g/L which is highly desirable from operational perspective.Article Citation - WoS: 143Citation - Scopus: 161Critical Review on Secondary Zinc Resources and Their Recycling Technologies(Elsevier, 2020-08) Kaya, Muammer; Hussaini, Shokrullah; Kursunoglu, SaitIn a race to save the earth of its rapidly depleting natural resources, the use of Secondary Raw Materials (SMRs) as alternative replacements in several processes is currently intensively pursued. The valorization of SMRs is consistent with the sustainable circular economy, where resource efficiency is maximized for the benefit of both the economy and green environment. In line with this mandate, this article focuses on investigating recent studies on secondary zinc (Zn) resources and describing state-of-art Zn recycling technologies. Globally, some of the main Zn-containing secondary raw materials are mine/concentrator/smelter tailings, wastes, slags, scraps, dust, etc. Although the pyrometallurgical process has been dominant in the secondary metal recycling processes, there has been growing interest and pressure to achieve sustainable and greener recycling methods to remediate the environmental problems caused by emissions of toxic heavy metals and sulfur oxides in the traditional smelting process. In the last decades, many sustainable and environmentally friendly novel hydrometallurgical processes for Zn extraction were developed to overcome tougher legislation and meet cost competitiveness. Secondary Zn recycling focuses on the development of selective Zn-rich but Pb, Fe, As-lean recovery processes.