TR-Dizin İndeksli Yayınlar Koleksiyonu
Permanent URI for this collectionhttps://hdl.handle.net/20.500.12573/396
Browse
7 results
Search Results
Article Performance Comparison of Waste Cooking Oil on Coal Slime Flotation With Sunflower Oil and Gas Oil(2023-12-31) Hacıfazlıoglu, Hasan; Arslan, Dilek SenolThis study explores the potential use of waste cooking sunflower oil (WSO) as an eco-friendly collector for coal slime flotation. WSO and coal slime are both wastes and are hazardous to human health and the environment, if not disposed of properly. In this study, co-disposal of the two wastes was investigated; a gas oil (petroleum derived oil) and crude sunflower oil (CSO) were used for collector efficiency comparisons. This study also presents a green, low-cost and environmentally friendly alternative. Kinetic flotation tests were carried out to study the flotation selectivity, flammability and combustible recovery. Contact angle measurements were performed with 3 different oils (CSO, WSO and gas oil) by sessile drop technique to determine the hydrophobicity and surface properties of coal. Fourier-transform infrared (FTIR) spectroscopy was utilized to analyze the chemical composition of both waste oil and coal samples. Keywords: Sunflower oil, waste cooking oil, gas oil, coal slime, flotationArticle Effective Processing of Specularite Ore by Wet Magnetic Separation and Reverse Flotation Techniques(2019-09-30) Top, Soner; Dhubaıbı, Ammar Mahdi Al; Vapur, HuseyinThe aim of this study was to obtain a high grade and yield percentage of iron concentratefrom a specularite ore by using wet magnetic separation and reverse flotation techniques.The processing a specularite sample using wet magnetic separation and reverseflotation method was studied. During the magnetic separation process, particle size was-2000 μm and magnetic field applied at 0.25 T and 0.85 T which were performed at asolid-liquid ratio of 10% and 20% by weight, respectively. In the reverse flotation tests,experimental design (DOE) was applied, statistically. Depressant dosage, collector dosageand flotation time were selected as main parameters. PH value, frother dosage (MIBC) andparticle size were constant parameters. The results showed that particle size and magnetic fieldintensity had a significant effect on the iron concentrate grade and yield for wet magneticseparation. The optimum value of iron concentrate grade was 98.75% at 0.25 T andparticle size of -150 μm while the highest value of iron concentrate yield was 67% at 0.75T and particle size of -74 μm. In the flotation tests, depressant dosage had the greatestinfluence on the iron concentrate grade while the effect of the collector dosage and frothcollection time were less. Froth collection time had the greatest effect on iron concentrateyield.The maximum iron concentrate grade was 90.13% for the following conditions:5250 g/ton depressant, 1000 g/ton collector and 2-minute froth collection time. Themaximum iron concentrate yield was 98.96% for the following conditions: 5250 g/tondepressant, 1500 g/ton collector and 1 min froth collection time under fixed conditions.Article Modeling the Throughput of Horizontal Shaft Impact Crushers Using Regression Analyses, Artificial Neural Networks and Multivariate Adaptive Regression Spline(2022-10-27) Koken, EkinBu çalışmada, yatay milli darbeli kırıcıların (HSI) kırma kapasitesinin (Q), regresyon analizleri, yapay sinir ağları (ANN) ve çok değişkenli uyarlamalı regresyon analizi (MARS) kullanılarak araştırılmıştır. Bu amaçla, Türkiye'deki çeşitli taş ocaklarında ikincil kırma işlemlerinde kullanılan 32 farklı HSI tipi kırıcı ele alınmıştır. Çeşitli sayısal veriler (rotor genişliği (Rw), rotor çapı (Rd), rotor hızı (Vr), karakterize edilen besleme boyutu (d80), çalışma enerjisi (Oe) ve kırmataşın Los Angeles aşınma değeri (LAAV)) her bir kırma–eleme tesisinden elde edilmiştir. Öncelikle, toplanan veriler kullanılarak doğrusal ve doğrusal olmayan regresyon analizleri gerçekleştirilmiştir. Daha sonra ise, bu kırıcıların Q değerini tahmin etmek için farklı ANN ve MARS analizleri yapılmıştır. Sonuç olarak, kırıcıların Q değerini tahmin etmek için güçlü tahmin modelleri geliştirilmiştir. Önerilen modellerin (M6–M10) belirleme katsayısı (R2) 0.91 ile 0.98 arasında değişmekte olup, söz konusu yüksek R2 değerleri geliştirilen modellerin göreceli başarısını göstermektedir. Bu nedenle, önerilen modeller, araştırılan HSI tipi kırıcıların Q değerini tahmin etmek için güvenilir bir şekilde kullanılabilir. Bununla birlikte, HSI tipi kırıcıların Q değerini etkileyen diğer faktörleri araştırmak için örnek çalışmalarının sayısı arttırılmalıdır.Article Manganzı Demir Cevherinden Manganın Çözündürülmesinde Farklı İndirgeme Maddelerinin Etkisi(Chamber of Mining Engineers of Turkey, 2022-06-26) Top, S.; Altiner, Mahmut; Kursunoglu, SaitIIn this paper, the manganese extraction from a manganiferous iron ore was investigated using reductive leaching. Various chemicals were used as a reducing agent to leach manganese selectively from the ore in the presence of sulfuric acid (H2SO4) solution. Firstly, optimum dissolution values were determined for selective manganese dissolution without using a reducing agent. As it was aimed at the selective extraction of manganese from the ore, the reductive leaching tests were conducted by adding the reducing agents under the following optimal parameters: a leaching time of 1 h, a stirring speed of 300 rpm, a temperature of 70°C, a sulfuric acid concentration of 1 M where the ore was leached with an extraction ratio of 11.54% Mn and 2.16% Fe. Manganese was dissolved with high efficiencies (up to 97.46%) from the ore by using different organic compounds (tartaric acid (C<inf>4</inf>H<inf>6</inf>O<inf>6</inf>), oxalic acid (C<inf>2</inf>H<inf>2</inf>O<inf>4</inf>), citric acid (C<inf>6</inf>H<inf>8</inf>O<inf>7</inf>), glucose (C<inf>6</inf>H<inf>12</inf>O<inf>6</inf>), sucrose (C<inf>12</inf>H<inf>22</inf>O<inf>11</inf>), and maleic acid (C<inf>4</inf>H<inf>4</inf>O<inf>4</inf>)) as the reducing agents. © 2022 Elsevier B.V., All rights reserved.Article Citation - Scopus: 2Kalsitik ve Dolomitik Kireçtaşlarının Çimentolu Macun Dolgunun Çevresel Davranışına Etkisi(Chamber of Mining Engineers of Turkey, 2022-03-07) Yılmaz, Tekin; Ercikdi, BayramTo enhance the strength and stability of cemented paste backfill (CPB), many alkaline materials are utilised as replacement or additive to binder or tailings in CPB. However, the effect of these materials on groundwater pollution of CPB needs to be comprehensively investigated. In this study, effects of the utilization of calcitic and dolomitic limestone (CL and DL) as replacement (10 wt.%) to sulphide mine tailings (S-MT) in CPB mixture on the long-term environmental behaviour of CPB were investigated. For this purpose, CPB samples (CPBs) were subjected to dynamic tank leaching tests over 360-days and the analyses of pH, sulphate (SO4 2-) and heavy metals (HMs) on the leachates were carried out. The effects of mineralogy and microstructure on the environmental behavior of CPBs were also examined by X-ray diffractometry and porosity tests. The findings showed that with the utilization of CL and DL, the pH of leachates remained at alkaline levels and the release of SO4 2- was significantly reduced. Furthermore, the denser microstructure in CPBs of CL and DL contributed to be prevented or be remarkably reduced the HMs-releases (except Cu, Mo and Pb). The results reveal that the mechanical properties of CPB as well as its impact on the groundwater pollution should be carefully evaluated. © 2022 Elsevier B.V., All rights reserved.Article Citation - Scopus: 6Extraction of Lanthanum and Cerıum from a Bastnasite Ore By Direct Acidic Leaching(Chamber of Mining Engineers of Turkey, 2020-06-01) Kursunoglu, Sait; Top, S.; Hussaini, Shokrullah; Gokcen, H. S.; Altiner, Mahmut; Ozsarac, Safak; Kaya, MuammerThe extraction of lanthanum (La) and cerium (Ce) from a bastnasite ore by direct acidic leaching was investigated. The effects of acid concentration and leaching temperature on the extraction of La and Ce from the ore were tested. Using nitric (NHO3), more than 85% of the La and Ce were simultaneously extracted into leach solution whereas the La and Ce dissolutions were determined as less than 85% by using sulfuric acid (H2SO4). The La dissolution exceeded 90% by using hydrochloric acid (HCl); however, the Ce dissolution remained below 85% under the following conditions: solid-to-liquid ratio of 20% (w/v), the acid concentration of 20%, leaching temperature of 25°C and leaching time of 1 h. The result revealed that HNO3 could be used as a solvent for the maximum simultaneous extraction of the La and Ce from the bastnasite ore. The leaching temperature had no crucial effect on the dissolution of La and Ce when HNO3 or HCl solutions were preferred as a solvating agent. However, the leaching temperature had a slight positive effect on the dissolutions of La and Ce when H2SO4 was used as a solvent. © 2023 Elsevier B.V., All rights reserved.Article Evaluation of the Capacity of Apron Feeders Used in Crushing–Screening Plants by Response Surface Methodology and Artificial Intelligence Methods(2024-06-30) Koken, EkinBu çalışmada Apron besleyicilerin kapasitesi (Q), yüzey tepki yöntemi (RSM) ve bazı yapay zekâ yöntemleriyle araştırılmıştır. Bu bağlamda, Türk Madencilik Sektöründe (TMI) kullanılan Apron besleyicilerin yaygın çalışma koşullarına ilişkin niceliksel verilerin toplanması amacıyla kapsamlı bir saha araştırması yapılmıştır. Toplanan bu verilere göre, Apron besleyicilerin Q değerini etkileyen değiştirgelerin ortaya konması için RSM analizleri gerçekleştirilmiştir. Buna göre, besleyici hazne genişliği (B), taşınan malzemenin bant üzerindeki yüksekliği (D), konveyör hızı (V) ve doluluk faktörü (φ), Q değeri için en önemli faktörler olarak belirlenmiştir. Q değerlerindeki gözlemlemek için çeşitli etkileşim ve kontur grafikleri sunulmuştur. Ayrıca, apron besleyicilerin Q değerini tahmin için, çok değişkenli uyarlamalı regresyon analizi (MARS), uyarlamalı ağ tabanlı bulanık mantık çıkarım sistemi (ANFIS) ve yapay sinir ağları (ANN) gibi bazı yapay zekâ yöntemlerine dayılı bazı tahmin modelleri tanıtılmıştır. Kurulan tahmin modellerinin performansı dağılım grafiklerine göre değerlendirilmiş ve RSM metodolojisine dayalı tahmin modelinin, yapay zekâ tabanlı tahmin modellerine göre nispeten daha iyi sonuçlar sağladığı bulunmuştur. Sunulan tahmin modelleri, yüksek kapasiteli Apron besleyicilerin Q değerini tahmin etmek için güvenilir bir şekilde kullanılabilir. Ancak kırma-eleme tesisi tasarımcıları, düşük kapasiteli Apron besleyicileri değerlendirmek için sunulan tahmin modellerini kullanırken dikkatli olmalıdır. Elde edilen bulgulara dayanarak, bu çalışma, Apron besleyicilerinin Q değerini değerlendirmek için RSM metodolojisinin ve çeşitli yapay zekâ yöntemlerinin uygulanabilirliğini göstermiştir.