TR-Dizin İndeksli Yayınlar Koleksiyonu
Permanent URI for this collectionhttps://hdl.handle.net/20.500.12573/396
Browse
3 results
Search Results
Article Citation - Scopus: 1Ethyl Vinyl Acetate (EVA) Composites With Nanoclays and Boric Acid: Thermal and Mechanical Properties(Turkish Energy, Nuclear and Mining Research Agency, 2025-04-01) Erdem, İlker; Kapçı, Mehmet Fazıl; Avcı, ŞeymaPolimerler pek çok uygulamada kullanılmaktadırlar fakat yanabilir olmaları sorun teşkil etmektedir. Polimerlere yanma dayanımı seramikler gibi (oksitler, hidroksitler, killer, vb.) inorganik malzemeler kullanılarak kazandırılabilir. Bu katkıların ilavesi polimer-inorganik kompozitlerin mekanik özelliklerini de değiştirebilir ki kompozit hazırlamada bu da dikkate alınmalıdır. Bu çalışmada etil vinil asetata (EVA) iki faklı nano-kil (ağırlıkça 20/100 oranına kadar) ve borik asit eklenerek polimerin yanmasında olası gecikme araştırılmıştır. Nano-kil ve BA ilavesinin etkisini belirlemek için saf polimer ve polimer-inorganik kompozitler için mekanik özellikler de belirlenmiştir. Hazırlanan nanokompozitlerin kimyasal yapıları (FT-IR, XRD), ısıl özellikleri (TGA), mekanik özellikleri (çekme testi) ve yanma davranışları değerlendirilmiştir. En yüksek nano-kil içeriğine sahip NC 1.4 örneği en uzun sürede yanmıştır. NC 2 örneğinin diğer örneklerden daha yüksek gerilim dayanımına ve Young katsayısına sahip olduğu bulunmuştur. Nano-killerdeki organik yüzey dönüştürücüler ve BA ilavesi nano-kil/EVA kompozitlerinin ısıl ve mekanik özellikleri üzerinde etkili olmuştur.Article Effects of Dry Particle Coating With Nano-and Microparticles on Early Compressive Strength of Portland Cement Pastes(Tulpar Academic Publishing, 2021-12-16) Yorulmaz, Hediye; Özuzun, Sümeyye; Uzal, Burak; İLkentapar, Serhan; Durak, Uğur; Karahan, Okan; Atis, C. D.It is known that nano-and microparticles have been very popular in recent years since their advantages. However, due to the very small size of such materials, they have very high tendency to agglomeration particularly for nanoparticles. Therefore, it is critical that they are properly distributed in the system to which they are added. This paper investigated the effects of dry particle coating with nano-and microparticles to solve the agglomeration problem. For a clear evaluation, paste samples were preferred to detemine the compressive strength. Nano-SiO<inf>2</inf> and nano-CaCO<inf>3</inf>, microCaCO<inf>3</inf> and micro-SiO<inf>2</inf>, also known as silica fume, were selected as particulate additives. It was studied by the addition of various percentages (0.3, 0.7, 1, 2, 3 and 5%) of nano-and microparticles in cementitious systems, replacing cement by weight with and without dry particle coating. Dry particle coating was made by using a highspeed paddle mixer. Portland cement and additive particles were mixed at 1500 rpm for 30 seconds in high-speed powder mixer designed for this purpose. The 3-day compressive strength of the cement-based samples to which particles were added at the specified rates was determined and the effect of the dry particle coating on the early strength was investigated. According to the results, it was observed that the production of paste with the dry particle coating technique gave higher compressive strength compared to the production of paste directly in early period. Especially with dry particle coating, compressive strength increased more than 100% in paste samples containing 0.3% nano-SiO<inf>2</inf> compared to direct addition without coating. © 2024 Elsevier B.V., All rights reserved.Article Citation - Scopus: 13Paclitaxel-Loaded Polycaprolactone Nanoparticles for Lung Tumors: Formulation, Comprehensive In Vitro Characterization, and Release Kinetic Studies(University of Ankara, 2022-09-29) Ünal, Sedat; Dogan, Osman Talha; Aktaş, YeşimObjective: Today, cancer is still among the most common chronic diseases. Nanoparticular drug delivery systems prepared with biocompatible and biodegradable polymers such as polycaprolactone are rational solution for anticancer agents with poor solubility and low bioavailability. The aim of this study is to prepare paclitaxel-loaded polycaprolactone nanoparticles, which is known to be a potent anticancer, and to elucidate in vitro characteristics and release kinetic mechanisms. Material and Method: It was aimed to prepare paclitaxel-loaded polycaprolactone nanoparticles by nanoprecipitation. Preformulation studies were carried out with different molecular weights of polycaprolactone (Mw: 14.000, Mw: 80.000). Nanoparticles were coated with Chitosan or Poly-l-lysine to obtain cationic surface charge and to increase cellular interaction. Comprehensive characterization of formulations and release kinetic studies were performed. Result and Discussion: The particle size of the formulations ranged from 188 nm to 383 nm. Encapsulation efficiency increased to 77% in different formulations. SEM analysis confirmed the nanoparticles were spherical. Within the scope of in vitro release studies, the release continued for up to 96 hours and less than 50% of the therapeutic load was released in the first 24 hours. Mathematical modeling indicated that the release kinetics fit more than one model with the Korsmeyer-Peppas, Peppas-Sahlin and Weibull models, which show high correlation. © 2023 Elsevier B.V., All rights reserved.