TR-Dizin İndeksli Yayınlar Koleksiyonu
Permanent URI for this collectionhttps://hdl.handle.net/20.500.12573/396
Browse
5 results
Search Results
Article Remazol Black 5 Boyasının Allium scorodoprasum L. Biyokütlesi ile Biyolojik Olarak Uzaklaştırılması; Biyosorpsiyon İzotermleri, Kinetik ve Termodinamik Çalışmalar(2023) Arslan, Dilek SenolThe current study aims to use Allium scorodoprasum L. biomass as an adsorbent for the bioremoval of Remazol black 5 (RB5) dye from aqueous solutions. The binding capacity of Allium scorodoprasum L. biosorbent to RB5 was investigated by recording the changes in pH, concentration of RB5 dye, temperature and contact time in batch aqueous solutions. Dubinin-Radushkevich (D-R), Freundlich, and Langmuir isotherm models were used to explain the experimental data. The maximum RB5 dye biosorption capacity of the biosorbent was found to be 19.8 mg g-1 at 25 oC. The average biosorption-free energy indicated that the biosorption event took place by chemical reaction and that it followed the PFO and IPD rate kinetics, respectively. Finally, thermodynamic adsorption studies indicated that the RB5 dye biosorption was both endothermic and spontaneous. The Allium scorodoprasum L. had a significant adsorption capacity for the anionic RB5 dye.Article Green Synthesis of C-Quantum Dots Modified Zno Nanophotocatalyst: the Effect of Different Solvents Used in Production of C-Quantum Dots Modified Zno Nanophotocatalyst on Photocatalytic Performance(2022-12-27) Duran, Ali; Inci, Abdullah; Vurucuel, Merve; Yılmaz, ErkanAccess the quality and sufficient amount of water is started to being problem with population increasing. One of the way to behalf the solution of this problem is usage waste water treatment in industry and agriculture. Wastewater treatment methods have disadvantages of being costly and producing secondary pollutants, photocatalysis, which is one of the advanced oxidation methods that is more advantageous and effective in removing pollutants, is promising. The newest member of nanomaterial, C-quantum dots (CQDs) has been increasingly get attention on lots of field including photocatalyst. Semiconductors are commonly used in photocatalysis however, they have electron pair recombination problem that results decreasing of efficiency. Doping semiconductors with different nanomaterials is one of the easiest ways to get over the problem. Recently CQDs has been started to used as dopping agent. Solvothermal method is among the easiest and environmentally friendly methods in nanomaterial synthesis. In this study, the effect of dimethylformamide, dimethylsulfoxide, ethylene glycol and water as solvothermal solvent on the photocatalytic efficiency of C-modified ZnO nanoparticles (CQDs@ZnO NPs) was investigated for the first time in the literature. Photocatalytic performance of CQDs@ZnO NPs was investigated on the photocatalytic degradation of methylene blue (MB). Angora mohair has been used as a CQDs source for the first time in the literature. Photocatalytic degradation performances of CQDs@ZnO NPs for MB at 300 min were 82.4%, 87.6% and 99% for ethylene glycol-water mixture, DMSO and DMF, respectively. The results proved that solvent type for solvothermal synthesis procedure has important role for photocatalytic performance of CQDs@ZnO NPs.Article Citation - WoS: 1GIS-AHP Approach for a Comprehensive Framework to Determine the Suitable Regions for Geothermal Power Plants in Izmir, Turkiye(Konya Teknik Univ, 2024-02-15) Koca, Kemal; Karipoglu, Fatih; Ozturk, Emel ZerayGeothermal energy is gaining more reputation and importance around the world. Correspondingly, suitable location selection is a critical step and has become necessary for the successful installation and operation of geothermal power plants. This study investigated suitability of & Idot;zmir region, located in the Aegean part of T & uuml;rkiye, in terms of geothermal power plants applications by using the combination of Geographical Information System and Analytic Hierarchy Process. Based on the request of power plants, thirteen important criteria were evaluated under three main categories named as physical (C1), environmental (C2) and technical (C3). Moreover, expert's opinions were taken into consideration to calculate the importance of these criteria. Key results showed that & Idot;zmir was suitable for geothermal power plants. The final suitability map layer pointed out that %8.73 (1.037 km2) of total area were determined as highly suitable regions in terms of installation. In addition, the obtained suitability map layer was compared with actual geothermal power plants. Based on the comparison study, power plants in Seferihisar were moderately suitable for geothermal power plants while the location of Bal & ccedil;ova power plant was highly suitable. Regarding the suitability assessment in the present study, the location of Dikili power plants had the least suitability score.Article Estimation of Economic Costs of Air Pollution From Road Vehicle Transportation in Turkey(2023-11-10) Ustaoglu, EdaHava kirliliğinin sosyo-ekonomik ve çevresel etkilerinin değerlendirilmesi, eylem önceliklerini belirlemek için bir temel oluşturan kirlilik kontrol stratejilerinin maliyet-fayda analizi için çok önemlidir. Bu makale, hava kalitesi modelleme, mühendislik ve ekonomiyi birleştiren entegre bir değerlendirme metodolojisi kullanarak karayolu taşımacılığıyla ilgili hava kirleticilerinin neden olduğu toplam dışsal maliyetlerin tahminine odaklanmaktadır. Karayolu taşımacılığından kaynaklanan emisyonların hesaplanmasında emisyon faktörleri ve ulaşım ağı özellikleri kullanılmış olup uluslararası örnek çalışmalardan uyarlanan ekonomik değerleme yaklaşımları takip edilerek Türkiye’deki hava kirliliğinin ekonomik maliyetinin hesaplanmasında kullanılmıştır. Sonuçlar, 2018 yılında Türkiye’de hava kirliliğinin toplam dışsal maliyetinin CO emisyonları için hesaplanan 37,500 avro ile NOx emisyonları için üst sınır olarak hesaplanan 2,686 milyon avro arasında değiştiğini gösterdi. CO2 emisyonlarının sosyal maliyetleri ile ilgili olarak, değerler 31 milyon avro ile 1,427 milyon avro arasında değişmektedir. Bunlardan ilki düşük değerli tahmini, ikincisi ise yüksek değerli tahmini temsil etmektedir. Bulgular karayolu taşımacılığından kaynaklanan emisyonların çevre ve toplum üzerindeki etkisinin Türkiye’de önemli olabileceğini göstermektedir. Bu nedenle, ulaşım emisyonlarını azaltmak ve sosyo-ekonomik refahı sürdürmek için bazı düzenlemeler gereklidir.Article Microfluidic Devices: A New Paradigm in Toxicity Studies(2020-06-15) Bosgelmez, Iffet Ipek; Yiğit, Fatma Esra; Icoz, KutaySon yıllarda, 3R (yerine koyma, azaltma, iyileştirme) prensibi doğrultusunda deney hayvanı kullanımını azaltmak için alternatif toksikoloji metotlarına (örneğin, in vitro modeller, in silico veya −omics verilerine) büyük önem verilmektedir. Bu metotlar, yeni ilaçların keşfedilmesiyle ilişkili preklinik etkinlik ve güvenliğin hızlı ve doğru bir şekilde tahmin edilmesine ve klinik çalışmalarda başarısızlık oranlarının azaltılmasına yardımcı olmaktadır. Günümüzde in vitro çalışmalar; iki boyutlu (2D) hücre kültürlerinden, doku, organ ve hatta organizmanın fizyolojisini taklit edebilen üç boyutlu (3D) hücre kültürlerine dönüşüm veya değişim içindedir. Bu bağlamda, 3D kültür modellerinin gelişmekte olan mikroakışkan teknolojilerine entegrasyonu ile çip-üstü-organ sistemleri geliştirilmiştir. Çip-üstü-organ sistemleri, ilaç araştırma ve geliştirme (Ar-Ge) sürecinde doz-yanıt ve toksisite mekanizmalarının iyi anlaşılmasını sağladığı için, ksenobiyotiklerin insan vücudu üzerindeki etkisinin tatmin edici düzeyde tahmin edilmesi mümkün olmaktadır. Ayrıca, bu sistemler farmakokinetik-farmakodinamik parametrelerin ve ilaç direncinin değerlendirilmesini destekleyebilir. Modeller, test edilen ksenobiyotiğe yanıtı incelemek için “çip-üstü-hastalık modelleri” şeklinde veya sağlıklı hücrelerle üretilebilir. Bu derleme kapsamında; çip-üstü-organ sistemlerinde kullanılan mikroakışkan sistemleri ele alınmakta ve karaciğer, böbrek, beyin, akciğer, kalp ve bağırsaklar gibi çeşitli örneklerin mikro-ortamlarının ve fizyolojik özelliklerinin çip-üstü-organ modellerine yansıtıldığı toksisite çalışmaları için potansiyelleri vurgulanmaktadır.
