Mühendislik Fakültesi

Permanent URI for this communityhttps://hdl.handle.net/20.500.12573/30

Browse

Now showing 1 - 6 of 6

Citation - WoS: 6
Citation - Scopus: 6
Experimental Measurements of Some Thermophysical Properties of Solid CdSb Intermetallic in the Sn-Cd Ternary Alloy
(Springer, 2016) Ozturk, Esra; Aksoz, Sezen; Altintas, Yemliha; Keslioglu, Kazum; Marasli, Necmettin; 0000-0002-1993-2655; AGÜ, Mühendislik Fakültesi, Malzeme Bilimi ve Nanoteknoloji Mühendisliği Bölümü; Altintas, Yemliha; 01. Abdullah Gül University
The equilibrated grain boundary groove shapes of solid CdSb in equilibrium with Sn-Cd-Sb eutectic liquid were observed from a quenched sample by using a radial heat flow apparatus. The Gibbs-Thomson coefficient, solid-liquid interfacial energy and grain boundary energy of the solid CdSb intermetallic were determined from the observed grain boundary groove shapes. The thermal conductivity of the eutectic solid and the thermal conductivity ratio of eutectic liquid to the eutectic solid in the Sn-35.8 at.%Cd-6.71 at.%Sb eutectic alloy at its eutectic melting temperature were also measured with a radial heat flow apparatus and a Bridgman-type growth apparatus, respectively.
Citation - WoS: 28
Citation - Scopus: 27
Flexible Electrodes Composed of Flower-Like MoS2 and MXene for Supercapacitor Applications
(Pergamon-Elsevier Science Ltd, 2024) Hayat, Hilal Pecenek; Dokan, Fatma Kilic; Onses, M. Serdar; Yilmaz, Erkan; Duran, Ali; Sahmetlioglu, Ertugrul; 0000-0002-6260-2424; AGÜ, Mühendislik Fakültesi, Malzeme Bilimi ve Nanoteknoloji Mühendisliği Bölümü; Duran, Ali; 01. Abdullah Gül University
Flexible supercapacitors with high charge storage ability are needed for emerging applications in wearable electronics. Here, we introduce a novel flexible supercapacitor electrode by incorporating flower-like MoS2 into MXene via a hydrothermal technique. We mostly focused on the structural design for electrode configuration to enhance the charge storage mechanism. Three different electrodes composed of MoS2, MXene, and MoS2@MXene were fabricated via a versatile drop-casting and drying method. There are unique advantages of incorporating MoS2 with MXene such as the fast electron transfer, hydrophilicity of the interface, and structural stability. The MoS2@MXene // MXene flexible asymmetric supercapacitor device offered a high energy density of 1.21 W h /kg and a power density of 54.45 W /kg. Moreover, the asymmetric device exhibits nearly identical electrochemical behavior following 100 bending cycles at different angles. The high electrochemical activity of MoS2 and MXene and good interaction are ascribed to the superior electrochemical performance of the composite material. Furthermore, this research could guide the development of flexible, high-performance, and low-cost electrodes which will be useful in wearable electronics.
Citation - WoS: 5
Citation - Scopus: 5
Formation of a Very High-Density Amorphous Phase of Carbon and Its Crystallization into a Simple Cubic Structure at High Pressure
(Elsevier B.V., 2021) Durandurdu, M.; AGÜ, Mühendislik Fakültesi, Malzeme Bilimi ve Nanoteknoloji Mühendisliği Bölümü; Durandurdu, Murat; 01. Abdullah Gül University; 02.07. Malzeme Bilimi ve Nanoteknoloji Mühendisliği; 02. Mühendislik Fakültesi
We report a direct computational evidence of a two-step transformation sequence for tetrahedral amorphous carbon (ta-C) with increasing pressure. First, ta-C gradually transforms into a very high-density amorphous phase (VHDA) phase. Second, the VDHA phase converts into a simple cubic (SC) crystal. The structural defects formed during the high-pressure treatment play important roles for the formation and stabilization of the SC structure, rather than favorable the SC4 crystal. These phase transformations are reversible. © 2021 Elsevier B.V., All rights reserved.
Citation - WoS: 5
Near- and Far-Field Characterization of Planar mm-Wave Antenna Arrays With Waveguide-to Transition
(Springer, 2016) Salhi, Mohammed Adnan; Kazemipour, Alireza; Gentille, Gennaro; Spirito, Marco; Kleine-Ostmann, Thomas; Schrader, Thorsten; AGÜ, Mühendislik Fakültesi, Mühendislik Bilimleri Bölümü; Kazemipour, Alireza; 01. Abdullah Gül University
We present the design and characterization of planar mm-wave patch antenna arrays with waveguide-to-microstrip transition using both near- and far-field methods. The arrays were designed for metrological assessment of error sources in antenna measurement. One antenna was designed for the automotive radar frequency range at 77 GHz, while another was designed for the frequency of 94 GHz, which is used, e.g., for imaging radar applications. In addition to the antennas, a simple transition from rectangular waveguide WR-10 to planar microstrip line on Rogers 3003 (TM) substrate has been designed based on probe coupling. For determination of the far-field radiation pattern of the antennas, we compare results from two different measurement methods to simulations. Both a far-field antenna measurement system and a planar near-field scanner with near-to-far-field transformation were used to determine the antenna diagrams. The fabricated antennas achieve a good matching and a good agreement between measured and simulated antenna diagrams. The results also show that the far-field scanner achieves more accurate measurement results with regard to simulations than the near-field scanner. The far-field antenna scanning system is built for metrological assessment and antenna calibration. The antennas are the first which were designed to be tested with the measurement system.
Operator User Management System Based on the TMF615 Standard
(Springer, 2016) Yigit, Melike; Macit, Muhammed; Gungor, V. Cagri; Kocak, Taskin; Ozhan, Oguz; AGÜ, Mühendislik Fakültesi, Bilgisayar Mühendisliği Bölümü; Gungor, V. Cagri; 01. Abdullah Gül University
Multi-vendor telecommunications networks in a typical service provider environment are managed using multiple proprietary user management systems (UMS), supplied by the operational support system (OSS) vendors. The management of a typical service provider includes communications solutions put into place between the global UMS and the local UMS. Nowadays, in service provider environments OSSs exist that use multi-vendor communications' protocols. In the telecommunications sector, the centralized management of all these different OSSs can cause serious problems for the network operation. In this respect, there is an urgent need for a standardized and centralized provisioning and auditing mechanism for the operators and their entitlements that work on these management systems. To address this need and to provide efficient operations among different service provider network components, this paper outlines the design and development of a TMF615 (Tele Management Forum) standard-based, common communication platform. In this respect, the proposed approach includes a common interface to address communication problems in multi-vendor, service provider environments. The interface and performance evaluations developed are some of the first solutions in this field, and the resulting solutions are converted into a commercial product with a high added value. In this regard, our proposed approach makes an important contribution to scientific literature and commercial applications. The realization of the proposed TMF615 standard-based interface enables the efficient and easy integration of existing and new OSSs of the service providers. In this way, a standardized interface is offered, along with a common communications platform adequate for all different systems. The vendors are thereby only responsible for application development based on specifications, and a standardized communications process is introduced for all related systems. This significantly facilitates the management of service providers, system performance is improved, and a massive cost reduction is provided at the same time. Consequently, the efficient management of network components is provided using a common standardized interface. In this respect, we aim to explain the TMF615 specifications; the evolution of UMS, OSSs and TMF615 with centralized UMS, as well as the implementation and performance evaluation of the TMF615 protocol are all explained in this paper.
Citation - WoS: 15
Citation - Scopus: 16
Stacking Ensemble Learning-Based Wireless Sensor Network Deployment Parameter Estimation
(Springer Heidelberg, 2023) Akbas, Ayhan; Buyrukoglu, Selim; 0000-0002-6425-104X; AGÜ, Mühendislik Fakültesi, Bilgisayar Mühendisliği Bölümü; Akbas, Ayhan; 01. Abdullah Gül University
In wireless sensor network projects, it is generally desired to cover the area to be monitored at a given cost and to achieve the maximum useful network lifetime. In the deployment of the wireless sensors, it is necessary to know in advance how many sensor nodes will be required, how much the distance between the nodes should be, etc., or what the transmit power level should be, etc. depending on the channel parameters of the area. This necessitates accurate calculation of variables such as maximum network lifetime, communication channel parameters, number of nodes to be used, and distance between nodes. As numbers reach to the order of hundreds, calculation tends to a NP hard problem to solve. At this point, we employed both single-based and stacked ensemble-based machine learning models to speed up the parameter estimations with highly accurate outcomes. Adaboost was superior over other models (Elastic Net, SVR) in single-based models. Stacked ensemble models achieved best results for the WSN parameter prediction compared to single-based models.

Browse

Browsing Mühendislik Fakültesi by WoS Q "Q2"