WoS İndeksli Yayınlar Koleksiyonu
Permanent URI for this collectionhttps://hdl.handle.net/20.500.12573/394
Browse
3 results
Search Results
Article Citation - WoS: 3Citation - Scopus: 4On the Utility of Crystal Plasticity Modeling to Uncover the Individual Roles of Microdeformation Mechanisms on the Work Hardening Response of Fe-23Mn TWIP Steel in the Presence of Hydrogen(ASME, 2018-02-08) Bal, B.; Koyama, M.; Canadinc, D.; Gerstein, G.; Maier, H. J.; Tsuzaki, K.This paper presents a combined experimental and theoretical analysis focusing on the individual roles of microdeformation mechanisms that are simultaneously active during the deformation of twinning-induced plasticity (TWIP) steels in the presence of hydrogen. Deformation responses of hydrogen-free and hydrogen-charged TWIP steels were examined with the aid of thorough electron microscopy. Specifically, hydrogen charging promoted twinning over slip-twin interactions and reduced ductility. Based on the experimental findings, a mechanism-based microscale fracture model was proposed, and incorporated into a visco-plastic self-consistent (VPSC) model to account for the stress-strain response in the presence of hydrogen. In addition, slip-twin and slip-grain boundary interactions in TWIP steels were also incorporated into VPSC, in order to capture the deformation response of the material in the presence of hydrogen. The simulation results not only verify the success of the proposed hydrogen embrittlement (HE) mechanism for TWIP steels, but also open a venue for the utility of these superior materials in the presence of hydrogen.Article Citation - WoS: 2Citation - Scopus: 3Investigation of Hydrogen Diffusion Profile of Different Metallic Materials for a Better Understanding of Hydrogen Embrittlement(Gazi Univ, 2023-12-01) Kapci, Mehmet Fazil; Bal, BurakIn this study, hydrogen diffusion profiles of different metallic materials were investigated. To model hydrogen diffusion, 1D and 2D mass diffusion models were prepared in MATLAB. Iron, nickel and titanium were selected as a material of choice to represent body-centered cubic, facecentered cubic, and hexagonal closed paced crystal structures, respectively. In addition, hydrogen back diffusion profiles were also modeled after certain baking times. Current results reveal that hydrogen diffusion depth depends on the microstructure, energy barrier model, temperature, and charging time. In addition, baking can help for back diffusion of hydrogen and can be utilized as hydrogen embrittlement prevention method. Since hydrogen diffusion is very crucial step to understand and evaluate hydrogen embrittlement, current set of results constitutes an important guideline for hydrogen diffusion calculations and ideal baking time for hydrogen back diffusion for different materials. Furthermore, these results can be used to evaluate hydrogen content inside the material over expensive and hard to find experimental facilities such as, thermal desorption spectroscopy.Article Citation - WoS: 9Citation - Scopus: 11Evaluation of Diatomite Substitute With Thermal Power Plant Waste Fly Ash in Sustainable Geopolymer Through Life Cycle Assessment(Springer, 2025-02-28) Ilkentapar, Serhan; Orklemez, Ezgi; Durak, Ugur; Gulcimen, Sedat; Bayram, Savas; Uzal, Nigmet; Atis, Cengiz DuranThis research demonstrates the potential of diatomite as a fly ash replacement to improve mechanical properties and environmental sustainability and presents it as a viable alternative for sustainable construction. Additionally, a life cycle assessment (LCA) was conducted on the produced mortars to quantitatively compare their environmental impacts using a cradle-to-gate approach. In mixtures, it was used by replacing the diatomite in the ratios of 1%, 2%, 3%, 4%, and 5% by weight of the fly ash. Workability, unit weight, flexural and compressive strength, abrasion resistance, elevated temperature resistance and microstructure analysis were carried out. The results indicated that replacing 1%, 2%, and 3% diatomite increased the compressive and flexural strength of mortars due to their higher specific surface area. Two percent replacement of diatomite provided the best results. FESEM results of 3% diatomite inclusion showed more intense and compact microstructure of geopolymer. Diatomite inclusion increased the abrasion resistance of geopolymer. Since 2% diatomite replacement was found to be optimum, the LCA results showed that geopolymer mortar with 2% diatomite has 25% lower impacts in terms of global warming potential and 10% lower impacts in terms of terrestrial ecotoxicity than conventional Portland cement mortar.