WoS İndeksli Yayınlar Koleksiyonu
Permanent URI for this collectionhttps://hdl.handle.net/20.500.12573/394
Browse
3 results
Search Results
Article Tuning Mechanical Performance of PCL Scaffolds: Influence of 3D Bioprinting Parameters, Polymer Concentration, and Solvent Selection(IOP Publishing Ltd, 2025-09-01) Ceylan, Saniye Aylin; Baltacioglu, Mehmet Furkan; Bal, Burak; Bayram, Ferdi Caner; Isoglu, Ismail AlperThe mechanical performance of three-dimensional (3D) bioprinted scaffolds is susceptible to printing parameters and material formulation. In this study, poly (epsilon-caprolactone) (PCL) scaffolds were fabricated using four different polymer concentrations (10%, 25%, 50%, and 75% w/v) to investigate how these variations, along with process parameters, influence mechanical behavior. Maintaining the structural integrity of bioprinted constructs requires careful optimization of polymer concentration and precise control over parameters such as printing speed, pressure, and infill density. Tensile tests were conducted to evaluate the effects of these variables. Among the tested conditions, a 50% (w/v) concentration allowed for a broader operational window, enabling fabrication across a range of printing speeds and pressures. At a printing speed of 5 mm s-1, PCL-DCM exhibited a Young's modulus of 39.0 MPa, while PCL-CF samples printed at 10 mm s-1 achieved the highest modulus of 32.0 MPa. Notably, when the printing speed was kept constant, applying higher pressures led to an increase in Young's modulus, suggesting that pressure plays a key role in enhancing scaffold stiffness. When comparing the 50% and 75% (w/v) polymer concentrations, the 50% (w/v) formulation stood out by offering both higher elongation and greater stiffness, which makes it particularly suitable for load-bearing applications. These findings provide a quantitative framework for optimizing extrusion-based bioprinting of PCL scaffolds, with implications for customized biomedical implants and regenerative medicine.Article Citation - WoS: 10Citation - Scopus: 12The Effect of Ultrasonic Cleaning Upon Mechanical Properties of Metal Matrix Composites(Springer india, 2020-11-20) Aslan, Abdullah; Salur, Emin; Gunes, Aydin; Sahin, Omer Sinan; Karadag, Hakan Burak; Akdemir, AhmetThe aim of this study is to produce composite materials by recycling metallic chips, which are found in industry as a large amount of waste. In addition, it is aimed to investigate the effect of ultrasonic cleaning process as the consolidation behavior and mechanical properties of bulk material directly depend on the cleaning of waste metallic chips. In the present investigation, spheroidal graphite cast iron (GGG-40) was employed as reinforcement material in tin bronze (CuSn10) matrix system. GGG-40 and CuSn10 chips were cleaned by ultrasonic agitation in water for 20 and 40 min. Consolidation of the cleaned metallic chips was achieved with a hot press by applying 820 MPa pressure under 450 degrees C, and the cylindrical and prismatic metal matrix composite materials with different reinforcement ratios were successfully produced. Energy-dispersive X-ray and scanning electron microscopy analyses were carried out to determine the amount of the oxide removed from the surfaces of chips. The mechanical properties of the samples were determined by hardness, porosity, compression and three-point bending tests. According to the results of the analyses, it was found that CuSn10 surfaces were cleaned from 20%, 50% and GGG-40 surfaces from 35%, 39% oxides during 20- and 40-min cleaning time, respectively. In addition, the results of the mechanical tests revealed that increased ultrasonic cleaning time improves the consolidation quality of metallic chips and it provides successful covering of GGG-40 chips by the CuSn10 chips as a result of a better structural integrity. New machinery parts with high mechanical properties can be produced as a result of recycling of the metallic chips which are available as waste in industry by appropriate cleaning process and this situation makes this study more innovative, economical and environmentally friendly research.Article Citation - WoS: 21Citation - Scopus: 38Fresh, Mechanical, Transport, and Durability Properties of Self-Consolidating Rubberized Concrete(Amer Concrete inst, 2012) Karahan, Okan; Ozbay, Erdogan; Hossain, Khandaker M. A.; Lachemi, Mohamed; Atis, Cengiz D.This paper presents the fresh, mechanical, transport, and durability performances of self-consolidating rubberized concretes (SCRCs). Fresh concrete properties were determined with slump flow, V-funnel, J-ring, and L-box tests. Mechanical, transport, and durability properties were determined by measuring compressive, flexural, and splitting tensile strengths; bond strength characteristics; water porosity; water absorption; water sorptivity; rapid chloride-ion permeability; and freezing-and-thawing and corrosion resistance. SCRC mixtures with a water-binder ratio (w/b) of 0.32; total binder content of 500 kg/m(3) (842 lb/yd(3)); and crumb rubber content of 0, 10, 20, and 30% by fine aggregate volume were produced and tested. Fresh properties testing revealed that the use of crumb rubber as a fine aggregate diminished the filling and passing ability of SCRC. A gradual reduction in mechanical properties was also observed with an increase in crumb rubber content; however, the rate of compressive strength reduction was more evident than that of tensile strength. Despite the fact that water porosity, water absorption, and chloride-ion permeability increased slightly with the use of crumb rubber, a remarkable decrease was observed in the initial and secondary water sorptivity of SCRC. No significant decrease was observed in the freezing-and-thawing and corrosion resistance of SCRC with 10% crumb rubber. Beyond that level, however, durability performance was significantly affected.