WoS İndeksli Yayınlar Koleksiyonu
Permanent URI for this collectionhttps://hdl.handle.net/20.500.12573/394
Browse
7 results
Search Results
Article Citation - WoS: 2Citation - Scopus: 1Toward Sustainable Optoelectronics: Solution-Processed Quantum Dot Photodetector Fabrication Using a Surgical Blade(SPIE - Society of Photo-Optical Instrumentation Engineers, 2023-02-13) Savas, Muzeyyen; Yazici, Ahmet Faruk; Arslan, Aysenur; Mutluguen, Evren; Erdem, Talha; Yazlcl, Ahmet Faruk; Mutlugün, EvrenFabrication of optoelectronic devices relies on expensive, energy-consuming conventional tools including chemical vapor deposition, lithography, and metal evaporation. Furthermore, the films used in these devices are usually deposited at elevated temperatures (> 300 degrees C) and under high vacuum, which necessitate further restrictions on the device fabrication. Developing an alternative technology would contribute to the efforts on achieving a sustainable optoelectronics technology. Keeping this in our focus, here we present a simple technique to fabricate visible photodetectors (PDs). These fully solution-processed and transparent metal-semiconductor-metal (MSM) PDs employ silver nanowires (Ag NW) as the transparent electrodes replacing the indium-tin-oxide (ITO) commonly used in optoelectronic devices. By repeatedly spin coating Ag NWs on a glass substrate followed by the coating of zinc oxide nanoparticles, we obtained a highly conductive transparent electrode reaching a sheet resistance of 95 omega/? as measured by the four-probe method. Optical spectroscopy revealed that the transmittance of the Ag NW-ZnO films was 84% at 450 nm while the transmittance of the ITO films was 90% at the same wavelength. Following the formation of the conductive film, we scratched it using a heated surgical blade to open a gap. The scanning electron microscope images indicate that a gap of similar to 30 mu m is opened forming an insulating line. As the active layer, we drop-casted red-emitting CdSe/ZnS core-shell quantum dots (QDs) onto this gap to form a MSM PD. These visible QD-based PDs exhibited responsivities and detectivities up to 8.5 mA/W and 0.95 x 109 Jones, respectively at a bias voltage of 5 V and wavelength of 650 nm. These proof-of-concept PDs show that the environmentally friendly, low-cost, and energy-saving technique presented here can be an alternative to conventional, high-cost, and energy-hungry techniques while fabricating photoconductive devices.Article Citation - WoS: 1Citation - Scopus: 1Simultaneous Low Noise Radio Frequency Tone and Narrow Linewidth Optical Comb Generation From a Regeneratively Mode-Locked Laser(SPIE - Society of Photo-Optical Instrumentation Engineers, 2014-10-29) Ozdur, Ibrahim; Ozharar, Sarper; Delfyett, Peter J.A regeneratively mode-locked laser with simultaneous low noise radio frequency (RF) tone and optical comb generation is presented. The laser does not need any external RF signal and emits a pulse train at similar to 10 GHz repetition rate with a 1.5-ps optical pulse width after compression. The generated RF tone has a signal-to-noise ratio of 121 dB/Hz and an RF fluctuation of 10(-9) over 0.1 s. The optical frequency comb spacing is also at similar to 10 GHz and the optical comb tooth has a linewidth of <1 kHz. (C) 2014 Society of Photo-Optical Instrumentation Engineers (SPIE)Article Citation - WoS: 2Citation - Scopus: 1Shell-Shaped Active Layers for Omnidirectional Organic Photovoltaic Cells(SPIE - Society of Photo-Optical Instrumentation Engineers, 2022-10-27) Hah, DooyoungFor the employment of organic photovoltaic cells in wearable electronic systems, improvements in energy conversion efficiency and omnidirectionality (angular coverage) are highly appreciated. This study aims at those improvements by introducing shell-shaped active layers. The proposed device structures enhance light absorption and angular range through light coupling to guided modes in the active layer. Two shapes, i.e., a triangle and a semicircle, are examined for the shell cross-sections. Numerical simulation using finite-element analysis and finite-difference time-domain methods demonstrates that the devices with the triangular-shell-shaped active layers exhibit an average absorption enhancement of up to 63% for transverse electric (TE)-polarization and up to 32% for transverse magnetic (TM)-polarization when compared with the flat active layers of the same thicknesses. The average enhancements of the semicircular-shell-shaped active layers are found to be slightly lower than those values, with 60% for TE and 28% for TM. The examined structures also show good omnidirectionality with decent absorption up to an 81 deg incidence angle for the triangular-shell-shaped device and up to a 76 deg angle for the semicircular one when TM polarization is considered. These absorption enhancements and improved angular coverages make the proposed structures highly attractive for wearable electronic system applications. (c) 2022 Society of Photo-Optical InstrumentationEngineers (SPIE)Article Citation - WoS: 4Citation - Scopus: 4Rec. 2100 Color Gamut Revelation Using Spectrally Ultranarrow Emitters(SPIE - Society of Photo-Optical Instrumentation Engineers, 2017-11-22) Genc, Sinan; Uguz, Mustafa; Yilmaz, Osman; Mutlugun, EvrenWe theoretically simulate the performance of ultranarrow emitters for the first time to achieve record high coverage for the International Telecommunication Union Radiocommunication Sector BT. 2100 (Rec. 2100) and National Television System Committee (NTSC) color gamut. Our results, employing more than 130-m parameter sets, include the investigation into peak emission wavelength and full width at half maximum (FWHM) values for three primaries that show ultranarrow emitters, i.e., nanoplatelets are potentially promising materials to fully cover the Rec. 2100 color gamut. Using ultranarrow emitters having FWHM as low as 6 nm can provide the ability to attain 99.7% coverage area of the Rec. 2100 color gamut as well as increasing the NTSC triangle to 133.7% with full coverage. The parameter set that provides possibility to fully reach Rec. 2100 also has been shown to match with D65 white light by making use of the correct combination of those three primaries. Furthermore, we investigate the effect of the fourth color component on the CIE 1931 color space without sacrificing the achieved coverage percentages. The investigation into the fourth color component, cyan, is shown for the first time to enhance the Rec. 2100 gamut area to 127.7% with 99.9% coverage. The fourth color component also provides an NTSC coverage ratio of 171.5%. The investigation into the potential of emitters with ultranarrow emission bandwidth holds great promise for future display applications. (C) 2017 Society of Photo-Optical Instrumentation Engineers (SPIE)Article Citation - WoS: 4Citation - Scopus: 3Hemispherical-Shell Organic Photovoltaic Cells for Absorption Enhancement and Improved Angular Coverage(SPIE - Society of Photo-Optical Instrumentation Engineers, 2024-02-14) Hah, DooyoungA hemispherical shell shape is proposed for an organic photovoltaic cell structure, aiming at enhancing both light absorption and angular coverage. Three-dimensional finite element analysis method is used to study the absorption spectra within the hemispherical-shell-shaped active layer. The study reveals that the proposed structure can result in 66% and 36% of absorption improvements compared to a flat-structured device when the incoming light is transverse electric (TE)- and transverse magnetic (TM)-polarized, respectively. It is also learned that the proposed hemispherical shell structure has absorption improvement as high as 13% (TE) and 21% (TM) when compared to the previously reported semicylindrical shell structure. The angular coverage of the proposed structure is improved as well, reaching 81 deg (TE) and 82 deg (TM), which becomes quite useful for the wearable electronics applications where the incidence angle can vary in a random manner. These improvements can be attributed to better light coupling and guiding through the active layer made possible by the hemispherical shell shape of the device. (c) 2024 Society of Photo-Optical Instrumentation Engineers (SPIE)Article Development of an Optical Measurement System for Surface Depth Measurements and Study of Focus Effect on Determination of Steel Inclusion Content by EN-10247(SPIE - Society of Photo-Optical Instrumentation Engineers, 2021-10-27) Durkaya, Goksel; Kurtuldu, Huseyin; Cetin, Baris; Bal, BurakSurface inspections are important in steelmaking processes to characterize the final product's quality. We present a method to measure surface depth profile using laser scattering geometry. This technique is used to analyze the focus effect on microscopic analyses of steel inclusions using the EN-10247 standard. The results presented herein offer promising new perspectives for the metal manufacturing industry through cost-effective solutions that attain quasi in-line process inspection capabilities. (C) 2021 Society of Photo-Optical Instrumentation Engineers (SPIE)Article Citation - WoS: 4Citation - Scopus: 4Camera-Based Wildfire Smoke Detection for Foggy Environments(SPIE - Society of Photo-Optical Instrumentation Engineers, 2022-10-27) Tas, Merve; Tas, Yusuf; Balki, Oguzhan; Aydin, Zafer; Tasdemir, Kasim; Aydln, ZaferSmoke is the first visible sign of forest fires and the most commonly used feature for early forest fire detection using data from cameras. However, one of the natural challenges is the dense fog that appears in forests, which decreases the detection accuracy or triggers false alarms. In this study, we propose a system with a deep neural network-based image preprocessing approach that significantly improves the smoke segmentation and classification performance by dehazing the camera view. Our experimental results provide that the classification models reach 99% F1 score for the correct classification of smoke when the image dehazing method is used before the training process. The smoke localization system achieves 60% average precision when the mask region-based convolutional neural network is used with the ResNet101-FPN backbone. The proposed approach can be utilized for all smoke segmentation frameworks to increase fire detection performance. (c) 2022 SPIE and IS&T