WoS İndeksli Yayınlar Koleksiyonu
Permanent URI for this collectionhttps://hdl.handle.net/20.500.12573/394
Browse
69 results
Search Results
Article Development of Resistant Starch Type-5 and Its Utilization in Cookie-Preparation(North University Center Baia Mare, 2025-11-30) Oskaybas-Emlek, Betul; Ozbey, Ayse; Kahraman, KevserThe objective of this study was the production of resistant starch type-5 (RS-5), its characterization, and utilization in cookie making. In first part of the study, the effects of starch-fatty acid complex formation (RS-5) between tapioca starch and lauric acid on the structure, digestibility, thermal and morphological properties of tapioca starch were investigated. X-ray diffraction revealed that the RS-5 had a V-type crystalline pattern. FT-IR analysis showed that a distinctive peak at 2846 cm-1 was only observed in RS-5. The resistant starch (RS) content of native starch increased from 22.76% to 28.02% with RS-5 formation. In the second part of the study, the RS-5 was added as a replacement for wheat flour with 10%, 20%, and 30% compared to control sample made with 100% wheat flour in cookie-making. The effects of RS-5 replacement of cookie samples on some physicochemical, estimated glycemic index (eGI) value, physical, and hardness properties were determined. Compared to control cookie, the cookie samples included RS-5 had lower hardness value, higher spread ratio. The eGI value of cookie samples was slightly decreased with the replacement with RS-5. The results demonstrated that the RS-5 has good potential for developing softer cookie with no adverse impact on eGI value.Article Assessment of the Quality of Tuffs in Central Anatolia, Turkey: A Quantitative Classification Approach(Acad Sci Czech Republic Inst Rock Structure & Mechanics, 2025-12-03) Koken, Ekin; Ince, IsmailThe growing global demand for dimension stones necessitates efficient and accurate evaluation methods to ensure their optimal use in various industries. To assess their suitability for various dimension stone applications, this study investigates tuffs from Central Anatolia, Turkey. For this purpose, the fundamental physical and mechanical properties of the tuffs were determined in laboratory studies, and a detailed durability assessment was conducted for each rock type. The analysis results indicate that most of the examined rocks are of low quality and more suitable for non-load-bearing applications. Based on the collected data, fuzzy clustering techniques were applied to develop a new classification system, categorising the tuffs into four classes (Class A-D) according to their potential applications. Additionally, a user-friendly MATLAB-based software tool was also developed to facilitate the implementation of the proposed classification system.Article Citation - WoS: 1Comprehensive Prediction of FBN1 Targeting Mirnas: A Systems Biology Approach for Marfan Syndrome(Galenos Publishing House, 2025-09-22) Orhan, M.E.; Demirci, Y.M.; Saçar Demirci, M.D.S.; Demirci, Muserref Duygu SacarObjective: Marfan syndrome (MFS) is a genetic connective tissue disorder primarily caused by mutations in the FBN1 gene. Emerging evidence highlights the regulatory role of microRNAs (miRNAs) in modulating gene expression in MFS, but a systematic investigation into miRNAs targeting FBN1 is lacking. This study aimed to comprehensively identify miRNAs interacting with the FBN1 transcript to reveal potential molecular regulators and therapeutic targets. Methods: Human miRNA sequences were retrieved from miRBase (Release 22.1), and the canonical FBN1 transcript (RefSeq: NM_000138.5) was used for target prediction. Computational interaction analysis was conducted using the psRNATarget server with stringent parameters to detect potential miRNA binding sites. Expression profiles and disease associations of the top candidate miRNAs were further investigated through database integration and literature review. Results: Out of 2656 human mature miRNAs analyzed, 251 were predicted to bind FBN1, with the hsa-miR-181 family exhibiting the highest number of predicted interactions. Evidence from the literature highlighted dysregulation of hsa-miR-181 expression in MFS patients, suggesting a functional role in disease pathophysiology. Conclusion: This study identifies key members of the hsa-miR-181 family as post-transcriptional regulators of FBN1, offering new insights into miRNA-driven mechanisms in MFS. These findings support the potential of RNA-based diagnostics and therapeutic strategies targeting miRNA-FBN1 interactions. ©Copyright 2025 The Author.Article Use of Confocal Microscopy to Monitor Structural Transformations in Nanopillars Based on DNA and CdSe/CdZnSe Quantum Dots(Springer, 2023-06-24) Motevich, I. G.; Erdem, T.; Akrema, A.; Maskevich, S. A.; Strekal, N. D.Chip system prototypes in the form of nanopillars were created from DNA complexes with CdSe/CdZnSe/ZnS quantum dots immobilized on a plasmonic gold fi lm by the use of vacuum deposition technology and inorganic synthesis. The design and presence of terminal DNA labeled with Cy3 cyanine dyes makes it possible to carry out the hybridization reaction of this terminal strand with complementary DNA and to control the process by variation of the giant Raman scattering (GRS) and the fluorescence signal. The effect of molecular recognition of complementary DNA is accompanied by a change in the GRS spectrum, a 20-fold increase in the fluorescence intensity, and a decrease in the duration of fluorescence decay.Article Citation - WoS: 2Citation - Scopus: 1Toward Sustainable Optoelectronics: Solution-Processed Quantum Dot Photodetector Fabrication Using a Surgical Blade(SPIE - Society of Photo-Optical Instrumentation Engineers, 2023-02-13) Savas, Muzeyyen; Yazici, Ahmet Faruk; Arslan, Aysenur; Mutluguen, Evren; Erdem, Talha; Yazlcl, Ahmet Faruk; Mutlugün, EvrenFabrication of optoelectronic devices relies on expensive, energy-consuming conventional tools including chemical vapor deposition, lithography, and metal evaporation. Furthermore, the films used in these devices are usually deposited at elevated temperatures (> 300 degrees C) and under high vacuum, which necessitate further restrictions on the device fabrication. Developing an alternative technology would contribute to the efforts on achieving a sustainable optoelectronics technology. Keeping this in our focus, here we present a simple technique to fabricate visible photodetectors (PDs). These fully solution-processed and transparent metal-semiconductor-metal (MSM) PDs employ silver nanowires (Ag NW) as the transparent electrodes replacing the indium-tin-oxide (ITO) commonly used in optoelectronic devices. By repeatedly spin coating Ag NWs on a glass substrate followed by the coating of zinc oxide nanoparticles, we obtained a highly conductive transparent electrode reaching a sheet resistance of 95 omega/? as measured by the four-probe method. Optical spectroscopy revealed that the transmittance of the Ag NW-ZnO films was 84% at 450 nm while the transmittance of the ITO films was 90% at the same wavelength. Following the formation of the conductive film, we scratched it using a heated surgical blade to open a gap. The scanning electron microscope images indicate that a gap of similar to 30 mu m is opened forming an insulating line. As the active layer, we drop-casted red-emitting CdSe/ZnS core-shell quantum dots (QDs) onto this gap to form a MSM PD. These visible QD-based PDs exhibited responsivities and detectivities up to 8.5 mA/W and 0.95 x 109 Jones, respectively at a bias voltage of 5 V and wavelength of 650 nm. These proof-of-concept PDs show that the environmentally friendly, low-cost, and energy-saving technique presented here can be an alternative to conventional, high-cost, and energy-hungry techniques while fabricating photoconductive devices.Article Citation - WoS: 6Citation - Scopus: 10The Size and Concentration Effects of Al2O3 Nanoparticles on PSF Membranes With Enhanced Structural Stability and Filtration Performance(Desalination Publ, 2017-07) Saki, Seda; Uzal, Nigmet; Ates, NurayNanocomposite membranes have attracted attention for their high permeability, rejection efficiency, and thermal and mechanical stability. In this study, novel flat-sheet polysulfone nanocomposite membranes were prepared by a phase inversion method with polyethylenimine and Al2O3 nanoparticles to increase the flux and hydrophilicity. Al2O3 nanoparticles were added to the membrane matrix to enhance the permeability, selectivity, and mechanical resistance. Two different sizes of Al2O3 nanoparticles (20 and 80 nm) were used with different weight percentages of 0.2, 1, and 5 wt%. The effects of the size and concentration of the nanoparticles on the structural properties and filtration performance of the membranes were investigated. Scanning electron microscopy, Fourier transform infrared spectroscopy, porosity, water contact angle, thermogravimetric analysis, viscosity, and tensile strength measurements were used to characterize the prepared membranes. The membrane performance was evaluated with water flux and bovine serum albumin rejection tests. According to the results, the membrane containing 15 wt% polysulfone, 1 wt% polyethylenimine, and 5 wt% 20 nm Al2O3 showed the highest pure water flux, porosity, viscosity, and morphological stability. This membrane may have potential uses in water treatment applications.Conference Object Citation - WoS: 5Citation - Scopus: 6The Selection of Washing Machine Programs With Fuzzy Dematel and Moora-Ratio Multi-Criteria Decision-Making Methods Considering Environmental and Cost Criteria(Elsevier Science inc, 2024-01) Fidan, Fatma Sener; Aydogan, Emel Kizilkaya; Uzal, NigmetThe washing machine is the prevalent white household equipment in contemporary society. These machines provide consumers with a range of program options that encompass several variables, including temperature and detergent type. Nevertheless, the selection made by individual customers about the washing machine program they opt for carries substantial environmental consequences during the use stage of textile products. According to studies on the life cycle of clothes, it has been established that the use stage, following the extraction of raw materials, exerts the most substantial influence on environmental impacts. The objective of this research is to assess the washing machine programs provided by the manufacturer through the application of a comprehensive systematic approach for analysis. The evaluation of scenarios for washing machine programs was conducted using the MOORA-Ratio multi-criteria decision-making process. This evaluation considered various parameters, including environmental impact and cost. The life cycle assessment methodology was employed to quantify the environmental impact of the specified criteria. Based on the comprehensive study conducted by integrating criteria across numerous dimensions, it has been determined that the most favorable scenario wass scenario 1, which was developed for the Cotton 20 C program. The primary objective of this research endeavor is to fill a significant need in the current body of literature by undertaking a comprehensive review of washing machine programs that have not been previously recorded. This study employs a comprehensive methodology to investigate the environmental and economic implications linked to these activities, with the objective of delivering significant insights to producers and users.Article Citation - WoS: 2Citation - Scopus: 2The Nexus of Leadership, Political Empowerment, and Social Mobilization: The Case of the July 15 Coup Attempt in Turkey(Seta Foundation, 2020-06-30) Donmez, Rasim Ozgur; Timur, Kasim; Lloyd, Fatma Armagan TekeThis study analyzes the mutually empowering relations between Turkish President Recep Tayyip Erdogan and his followers, and how Erdogan's charismatic leadership and image functioned to galvanize his followers on the night of July 15, 2016, when large numbers of them mobilized against the attempted coup. The article has three sections. The first is a theoretical discussion which sheds light on the concept and the underlying mechanisms of political empowerment and its effects on the relationships between leaders and followers. The second section evaluates Erdogan's characteristics and ruling style, which was instrumental in motivating resistance to the abortive coup. Finally, the third section analyzes the various means by which Erdogan was able to inspire the masses to mobilize against the armed junta through interviews and observations.Article Citation - WoS: 1Citation - Scopus: 1The Comparison of Fragility Curves of Moment-Resisting and Braced Frames Used in Steel Structures Under Varying Wind Load(Turkish Chamber Civil Engineers, 2025-03-01) Ozalp, Abdulkadir; Gokdemir, Hande; Ciftci, CihanIn this study, the performance of two different steel structure types (moment-resisting frame and braced frame) under wind loading was compared by addressing the fragility curves of these structure types. To perform this comparison, the dimensions of the members of these structural systems were first determined. Then, nonlinear static pushover analyses were conducted to assess the performance levels of each frame type. After applying these analyses, time-history analyses were performed with 100 different wind loads for each varying equivalent mean wind speed. Afterwards, the probability of exceeding the predetermined structural performance limits of the structure types was determined using Monte Carlo simulation method. Finally, the results of the simulation method were used to adapt the maximum likelihood estimation method to obtain the fragility curves of the structures. To conclude, it has been revealed that the material cost of the structure doubles when diagonal elements are used, but the wind speed required for a 100% collapse probability to occur in the braced frame is twice as high compared to the moment-resisting frame.Article Sustainable Conservation Through the Interrelations Between Rural Architecture and Life: The Case of Çomakdağ(Emerald Group Publishing Ltd, 2025-06-24) Kurtulus, Vacide Betul; Guchan, Neriman Sahin; Şahin Güçhan, NerimanPurposeThe paper aims to propose a new approach to the sustainable conservation of rural heritage with the aim of understanding the relations between built environment and society. In the document "Concerning Rural Landscapes as Heritage" by ICOMOS-IFLA, it is argued that there is an interaction between daily life practices and the physical environment for production and cultural activities (ICOMOS, 2017). The main objective of the study is to underline the importance and necessity for this interaction continue for the sustainable conservation of rural areas.Design/methodology/approachThis paper investigates the relationship between the built environment and daily practices in Turkey's & Ccedil;omakdag Region, known for its significant rural architecture and enduring traditions. Through on-site investigation, the study explores the evolution of these relationships across various scales, including buildings, settlements and the region itself. This multi-scale approach aims to identify remaining cultural values and user needs.FindingsTraditional ways of life have undergone a transformation, impacting the interactions between inhabitants and their natural, agricultural and architectural spaces. The primary drivers of these changes are shifts in income sources, technological advancements and infrastructural developments within the settlements. While maintaining a connection between the built environment and daily life practices remains essential, contemporary living conditions and altered routines present challenges to this continuity.Originality/valueThis study builds on previous research on the & Ccedil;omakdag Region. Batur (2010) explored the region's architectural features, including colors and ornamentation. Kurtulus and G & uuml;& ccedil;han (2020) focused on Kizilaga & ccedil; village, examining typical house characteristics. This research offers a new perspective on rural heritage preservation. It emphasizes the importance of maintaining the interrelationship between daily life and the built environment across various scales for sustainable conservation.