WoS İndeksli Yayınlar Koleksiyonu
Permanent URI for this collectionhttps://hdl.handle.net/20.500.12573/394
Browse
2 results
Search Results
Article Citation - WoS: 10Ni-Zn Metal-Organic Framework Based Membranes for Rejection of Pb (II) Ions(Elsevier, 2022-12) Senol-Arslan, Dilek; Gul, Ayse; Uzal, Nigmet; Yavuz, EmreThe present paper describes a sustainable and affordable supply of clean, and safe water approach to investigate Ni-Zn MOF embedded membrane for rejection of Pb (II) ions in aqueous solution. Ni-Zn MOF powder was prepared by solvo-thermal method, and then the Ni-Zn MOF embedded membranes with various concentrations (0.025 wt%, 0.05 wt% and 0.1 wt%). The membranes were fabricated by a common phase inversion method. Phase solutions of Pb(II) prepared with PVP at different concentrations in aqueous solutions. Water filtration and Pb (II) rejection tests were operated on a batch scale. The prepared Ni-Zn MOF powder characterized by FTIR, SEM-EDX analyses and zeta potential measurements. Ni-Zn MOF membranes were characterized by FTIR, SEM-EDX analysis, contact angle, and water permeability measurements. The effects of important parameters on adsorption including concentration and pH were investigated. The obtained results indicated that the maximum rejection of Pb(II) was 98% for a feed solution containing 80 mg Pb/L at pH 8 and assistance with 2 % PVP for 0.05 wt% Ni-Zn MOF membrane. Additionally, it was detected that blend membranes revealed better Pb(II) rejection than pure PSF membrane.Article Citation - WoS: 14Citation - Scopus: 14Isotherms, Kinetics and Thermodynamics of Pb(II) Adsorption by Crosslinked Chitosan/Sepiolite Composite(Springer, 2021-04-13) Senol-Arslan, DilekA novel composite adsorbent was prepared from chitosan (Ch) and sepiolite (S) for removal of Pb(II) from aqueous solution. The Ch-S composite beads were successfully synthesized by crosslinking epichlorohydrin (ECH) and tripolyphosphate (NaTPP). A number of physicochemical parameters such as, pH, initial Pb(II) concentration, temperature, contact time and desorption have been studied during the adsorption process. Experimental data acquired from batch adsorption tests have been analyzed by three isotherm models (Langmuir, Freundlich and Dubinin-Radushkevich), and three kinetic models including the pseudo-first-order, the pseudo-second-order and intraparticle diffusion equations using nonlinear regression technique. Langmuir isotherm was the best to fit the experimental data (R-2 = 0.971). The maximum adsorption capacity was 0.158 mol kg(-1) from Langmuir isotherm model. Maximum removal efficiency was found approximately 66% for the initial Pb(II) concentration of 1000 mg/L, adsorbent dosage of 100 mg and agitation speed of 150 rpm at pH 4.5. The adsorption free energy was found as E-DR (15.8 kJ mol(-1)), which indicated that Pb(II) adsorption process onto Ch-S composite was chemically performed. The kinetic studies have shown that the best fitted kinetic model is the pseudo-first order (R-2 = 0.979). Adsorption enthalpy value was determined as 18.7 kJ mol(-1), adsorption entropy was found as 106 J mol(-1) K-1, and Gibbs free energy was found as 12.9 kJ mol(-1). The thermodynamic parameters showed that the adsorption of Pb(II) on Ch-S was endothermic, possible and spontaneous.