WoS İndeksli Yayınlar Koleksiyonu
Permanent URI for this collectionhttps://hdl.handle.net/20.500.12573/394
Browse
14 results
Search Results
Article G-C3N4@Fe3O4 Nanomaterial Synthesis for Magnetic Solid-Phase Extraction and Photocatalytic Removal of Basic Blue 3(Springer Heidelberg, 2025-12-16) Kizil, Nebiye; Kayaci, Nilgun; Erbilgin, Duygu Erkmen; Yola, Mehmet Lutfi; Yilmaz, Erkan; Soylak, MustafaThe present research synthesized a g-C3N4@Fe3O4 hybrid material for efficient magnetic solid-phase extraction (MSPE) and photocatalytic degradation of Basic Blue 3 (BB3) dye from wastewater. Characterization of the synthesized g-C3N4@Fe3O4 was conducted through Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), scanning electron microscopy (SEM), and energy-dispersive X-ray spectroscopy (EDX). The optimization of the method was carried out by examining parameters such as pH, g-C3N4@Fe3O4 amount, sample volume, and adsorption/desorption duration. In addition, analytical performance criteria such as limit of detection (LOD), limit of quantification (LOQ), and relative standard deviation (RSD) of the MSPE method were calculated as 1.29 mu g L-1, 4.28 mu g L-1, and 1.9%, respectively. The method was applied to real samples, including wastewater and textiles, and validated through addition/recovery studies for the magnetic solid-phase extraction procedure. The recoveries were gained between 91 and 100%. The reusability synthesized g-C3N4@Fe3O4 was also evaluated. The recoveries for Basic Blue 3 dye decreased to 81% after the fourth experiment. Furthermore, the photocatalytic performance of the g-C3N4@Fe3O4 hybrid material was evaluated due to its good surface area and strong interaction with Basic Blue 3 dye. The photocatalytic activity of g-C3N4@Fe3O4 hybrid material was calculated as 96.8% for 100 mg in 300 min.Article Does Your Love Lift Me Higher? A Direct Replication of the Energising Role of Secure Relationships(John Wiley & Sons Ltd, 2025-12-07) Lagap, Adar Cem; Harma, MehmetPrevious work has revealed that priming people with significant others increases feelings of security and energy, and in turn, boosts exploration motivations. In this preregistered study, we directly replicated Luke et al.'s (2012) Study 2 (N = 281). We found similar results as the replicated study regarding increased security feelings and exploration motivations on the self-report measures after the priming. However, we did not find any support for the increased energy feelings after the attachment security priming. In addition, contrary to Luke et al.'s (2012) results, energy feelings did not mediate the relationship between security priming and exploration motivations. A discussion of null findings, along with the limitations of self-reports and potential misinterpretation of the mediational analyses, follows. We also discuss possible future implications of the current findings.Article Measuring Disaster Resilience in MENA Countries and Its Impact on Disaster Losses(Nature Portfolio, 2025-12-08) Demir, Abdullah; Dincer, Ali Ersin; Dincer, Nazire NergizDisaster resilience is a protective feature aimed at reducing the effects of natural disaster events and losses resulting from these events. This study develops a Disaster Resilience Index (DRI) for MENA countries to assess resilience across ten dimensions, including economic, social, institutional, infrastructural, and environmental factors. Unlike most prior studies, which focus on individual countries or use narrower sets of indicators, this study provides a multi-country, region-specific framework tailored to MENA's socio-economic and environmental heterogeneity. The index integrates geospatial data on disaster risk from geographic information systems (GIS) and a natural hazard risk dimension. Validation using disaster-related fatalities, supported by a dual PCA-based sensitivity analysis, confirms the robustness of the DRI and reveals that countries with stronger governance, higher human capital, and robust infrastructure tend to exhibit greater resilience, while fragile states and resource-dependent economies are more vulnerable. Notably, the DRI calculated using both dimension-specific and all-indicator PCA produces closely aligned values, indicating the choice of conducting PCA at the dimension level does not significantly alter the overall assessment of disaster resilience. These insights provide a foundation for targeted disaster risk reduction strategies and highlight areas where international cooperation and policy interventions can strengthen resilience in the region.Article Citation - WoS: 1Citation - Scopus: 1Ultra-Durable Information-Encoded Anti-Counterfeiting Self-Assembled Nanocrystal Labels(Wiley-VCH Verlag GmbH, 2025-11-28) Haddadifam, Taha; Shabani, Farzan; Kalay, Mustafa; Khaligh, Aisan; Mutlugun, Evren; Onses, Mustafa Serdar; Demir, Hilmi VolkanForgery, a serious universal problem, is causing huge economic losses every year. Against forgery, information-encoded labelling systems have attracted significant attention for a diverse range of anti-counterfeiting applications. Here, cost-effective and ultra-durable nanocrystal-based labels are proposed and demonstrated in which information can be encoded as physically unclonable functions (PUFs) of hardware-oriented security systems. The fabrication method of the PUFs is based on the self-assembly of colloidal quantum wells (CQWs) and generation of unclonable features within their pattern at a liquid-liquid interface. These CQW PUFs are analyzed with well-known statistical tests, which show a uniqueness level of 0.5060 +/- 0.0323 and prove their randomness. In addition, a feature-matching algorithm is used to authenticate these information-encoded CQW PUFs. For the safety of the semiconductor chips, a CQW PUF is attached to the surface of the chip to protect against hardware cyber-attacks. Eventually, fabricated labels are examined against high temperatures and moisture environments. The fabricated CQW label is durable for a period of 150 days it is tested, demonstrating ultra-high stability of the label. High stability and durability, cost-effectiveness, and high encoding capacity make these proposed nanocrystal labels extremely attractive for large-scale commercialization.Article Engineering a Bilayered Scaffold as a Potential Cardiac Patch: From Scaffold Design to in Vitro Assessment(Springer Singapore Pte Ltd, 2025-11-24) Yuruk, Adile; Duzler, Ayhan; Isoglu, Sevil Dincer; Isoglu, Ismail AlperIn this study, we developed a novel bilayered scaffold consisting of a bottom layer composed of the Decellularized Bovine Pericardium (DP) coated with Polyaniline Nanoparticles (PANINPs) and a top layer made of an electrospun Poly(lactic-co-glycolic acid)/Gelatin (PLGA/Gel) membrane incorporated with Vascular Endothelial Growth Factor (VEGF) and hawthorn extract. Functionally, the DP supplies native Extracellular Matrix (ECM) components and mechanical support, while PANINPs provide conductivity. The electrospun PLGA/Gel layer mimics fibrous ECM. It incorporates bioactives, with VEGF promoting pro-angiogenic stimulation and hawthorn extract enhancing anticoagulant activity, as well as increasing surface hydrophilicity. The tissue adhesive ensures the interfacial integrity between the two layers. Decellularization efficiency was confirmed histologically using 4 ',6-diamidino-2-phenylindole (DAPI) and Hematoxylin-Eosin (H&E) staining. The DP exhibited a DNA content of 115.9 +/- 47.8 ng/mg DNA, compared to 982.88 +/- 395.42 ng/mg in Native Pericardium (NP). The PANINPs had an average particle size of 104.94 +/- 13.7 nm. The conductivity of PANINPs-coated decellularized pericardium was measured to be 9.093 +/- 8.6 x 10- 4 S/cm using the four-point probe method. PLGA/Gel membranes containing hawthorn extract (1%, 5%, 10%, and 15% w/v) and VEGF (0.1 mu g/mL, 0.5 mu g/mL, and 1 mu g/mL) were fabricated by electrospinning, resulting in fiber diameters between 850 and 1200 nm and pore sizes between 14 and 20 mu m. The anticoagulant efficiency of the membranes containing hawthorn extract reached 430 s in the Activated Partial Thromboplastin Time Assay (aPTT). Mechanical testing revealed a tensile strength of 22.70 +/- 6.33 MPa, an elongation of 53.58 +/- 10.63%, and Young's modulus of 0.67 +/- 0.10 MPa. The scaffold also exhibited over 91% cell viability and excellent cardiomyocyte adhesion. The hemolysis ratio was determined to be 0.421 +/- 0.191%, which confirms its blood compatibility. Our results indicate that the proposed bilayered scaffold can be a promising candidate for cardiac patch applications.Article Citation - WoS: 2Citation - Scopus: 1Fully Inorganic Colloidal CsPbBr3 Perovskite Nanocrystals with Zn-Doping and Metal Oxide Encapsulation for Luminescent Display Panels(Amer Chemical Soc, 2025-11-07) Khorasani, Azam; Soheyli, Ehsan; Mutlugun, EvrenPerovskite nanocrystals (PeNCs) are emerging as exceptional materials due to their high photoluminescence quantum yield, tunable bandgap, and excellent charge carrier mobility, enabling a wide range of colors and promising applications in optoelectronics and photovoltaics. Despite their advantages, PeNCs face stability challenges caused by environmental factors. In the presented study, a facile and versatile colloidal hot-injection method was used to apply the beneficial aspects of Zn-doping in cesium lead bromide (CsPbBr3) PeNCs. The uniform platelet-shaped Zn-doped CsPbBr3 PeNCs were prepared by doping with a 0.1 molar ratio of zinc-oleate solution in the perovskite precursors during synthesis. Then, zinc-oxide (ZnO) and nickel-oxide (NiO) coating layers were utilized separately to effectively reduce surface defects, encapsulate PeNCs, and improve their stability issues. To fabricate the coated PeNCs with metal oxides, zinc acetate and nickel(II) acetate tetrahydrate solutions were prepared individually and added to the crude perovskite solutions. The quantum yield of Zn-doped CsPbBr3 (CsPb1-xZnxBr3) PeNCs coated with ZnO increased from 50% for bare CsPbBr3 to over 84%, while NiO-coated PeNCs exhibited a higher yield of 90% both of which remarkably enhanced the emission stability. Moreover, NiO coatings represented a proper protection against surface imperfections and improved resistance to external stimuli. The combination of facile/effective preparation method, excellent emission efficiency, and reliable emission stability nominates the prepared colloidal composite for display pixels, detectors, and lasers.Article Vim-Polyp: Multimodal Colon Polyp Dataset with Video, Histopathology, and Protein Expression(Nature Portfolio, 2025-12-03) Dogan, Refika Sultan; Akay, Ebru; Dogan, Serkan; Yilmaz, BulentThe dataset in this study includes 202 videos with a total of 422 minutes, reaching Kayseri City Hospital's gastroenterology department as colonoscopy videos and 1903 microscopy images between 2019 and 2021. It includes 399 colonoscopy, microscopy images, and pathological diagnoses of polyps, as well as immunohistochemical staining results for proteins that play an important role in the assessment of cancerous cells, such as staining results for p53 (clone: bp53-11), Ki-67 (clone: 30-9), CD34 (clone: QBend/10), PD-L1 (clone: SP142), BRAF (clone: V600E) and VEGF (clone: SP125). By sharing the data openly, we aim to facilitate benchmarking, exploratory analysis and transfer-learning studies on colorectal polyps and cancer. In combination with external datasets or pretrained models, the resource can help advance data-driven detection and characterisation work. The diverse range of polyps assigned to cancer stages from 201 patients makes this tool valuable for researchers and clinicians in furthering diagnosis and treatment.Article Development and Characterization of Starch-Fatty Acid Complexes Produced with Buckwheat Starch and Capric/Stearic Acid Using Different Reaction Conditions(Elsevier, 2025-12) Oskaybas-Emlek, Betul; Ozbey, Ayse; Aydemir, Levent Yurdaer; Kahraman, KevserThe aim of present study was to investigate the impact of reaction parameters on the complex formation between buckwheat starch and capric acid (B-Capric) or stearic acid (B-Stearic). The most effective parameters on complex formation indicator (Complex index (CI) value) were found as reaction temperature (60-90 degrees C) and pH (5-8). Additionally, the effect of these parameters on physicochemical, pasting, and in-vitro digestibility properties of complex samples were evaluated. XRD and FTIR was also used in characterize the complex samples. In general, increasing pH increased the CI values of B-Stearic samples while decreasing those of B-Capric samples. Syneresis of buckwheat starch increased after complexation while paste clarity and swelling power diminished. The pasting properties of native starch significantly changed after complex formation. The FTIR results showed that starch structure changed with complex formation. XRD revealed that buckwheat starch, having an A-type pattern, converted to V-type pattern after complexation. Complex formation of buckwheat starch with capric and stearic acid significantly increased the RS content of buckwheat starch (19.01 %) by up to 36.25 % and 30.60 %, respectively. These results highlight the possibility of using buckwheat starch-capric acid/stearic acid complexes in food formulation to enhance the RS content.Article Looking for Stability in Chaos: A Scoping Review of Relational Turbulence Theory from a Dyadic Perspective(Wiley, 2025-11-21) Lagap, Adar Cem; Gungor, DuyguThe current scoping review overviews articles that apply the relational turbulence model/theory to guide the implementation of actor-partner interdependence modeling within a structural equation modeling framework. Sixteen studies are examined in the final synthesis of the review. Research themes center on communication strategies and social connection, dispositional and situational factors, and, lastly, mental and physical health. Current work illustrates that scholars are primarily interested in sources of relational uncertainty and its intrapersonal and interpersonal consequences. Sources of partner influence and their implications for relational dynamics are also examined across the synthesized studies. Overall, more actor effects than partner effects were statistically significant. Commercial statistical programs appear preferred for analyzing dyadic data, and assessments of fit indices are reported to evaluate proposed analytic models in this body of research. Methodological and theoretical limitations are highlighted, and implications for future research are discussed.Article Citation - WoS: 1A Comprehensive Analysis of Acoustic Emission Signals To Distinguish the Different Damage Types for Fiber-Reinforced Polymers: A Review(Wiley, 2025-12-03) Yilmaz, CagatayFiber-reinforced polymers (FRP) attract the attention of key industries, such as aerospace, wind energy, and automotive, as they can reduce the weight of structural components without compromising their mechanical properties. Due to FRP's anisotropic and non-homogeneous structure, their failure under different loading conditions and the corresponding failure mechanisms must be investigated. One method that progressively monitors the failure of FRP underload is Acoustic Emission (AE). AE can register the elastic stress waves in the form of digitized waveforms, released by the discontinuous events that occur in the FRP under load. These discontinuities can be clustered and identified as transverse cracking, fiber/matrix interface debonding, delamination, and fiber failure by analyzing the AE waveforms. Recently, numerous clustering approaches using machine learning algorithms, along with the varying features of AE waveforms, have been developed and are being used. These algorithms include supervised and unsupervised clustering, deep learning algorithms, and neural network methods, among others. While supervised algorithms require a training dataset to classify AE signals, unsupervised algorithms can perform clustering without training datasets. Deep learning and neural network algorithms can train themselves to cluster data, but they may require a significant amount of computer power when the dataset is large. This review paper provides comprehensive information on the clustering algorithm, along with the AE wave features, the range of features for different damage types, and the type of reinforcer.