WoS İndeksli Yayınlar Koleksiyonu
Permanent URI for this collectionhttps://hdl.handle.net/20.500.12573/394
Browse
6 results
Search Results
Article Tapered Curved-Beam Hinges for Electret-Based Vibration Energy Harvesting Devices(IOP Publishing Ltd, 2024-12-01) Hah, DooyoungInterest in vibration energy harvesting have been growing recently for various applications. One of the major development goals for vibration energy harvesters has been improvement in energy conversion efficiency. To pursue that goal, one of the main approaches has been to broaden the spectra of harvesters. Employment of nonlinear springs, such as curved-beam hinges, has proven to be effective for that purpose. The main contribution of the current study is to introduce a lateral taper to the curved beam so as to further optimize the harvester performances. Via numerical analysis by using stochastic differential equations, the study shows that at 0.05g of vibration strength, tapered curved-beam hinges can result in higher electric power output than the non-tapered ones. Deformation-induced stress was taken into consideration as well, in reference to the fracture strength of the material (single-crystal silicon). At lower vibration strength (0.02g), spring nonlinearity becomes weaker, and as a result, the narrowest curved-beam hinge produces the highest output power. Overall, the current study demonstrates that tapering of the curved beam can be a useful addition in the vibration energy harvester design.Conference Object Symmetric Electret-Based Vibration Energy Harvesters With Curved-Beam Hinges(IEEE, 2023-05-28) Hah, DooyoungBroadband power spectral characteristics are desirable in vibration energy harvesters, and it can be achieved by employing curved-beam hinges, which exhibit force-displacement nonlinearity. Via numerical analysis by using stochastic differential equations and colored-noise inputs, this study shows that a symmetric configuration of the curved-beam hinges in electret-based harvesters can produce higher (up to 8% more) power outputs than an asymmetric one. It also presents that the harvesters with curved-beam hinges can produce higher (up to 4.4 times) power outputs than those with straight hinges when the vibration magnitude is 0.05g.Article Citation - WoS: 3Citation - Scopus: 3RF MEMS Variable Attenuators With Improved dB-Linearity(Springer Heidelberg, 2023-02-22) Hah, DooyoungA variable attenuator is one of the essential components in radio frequency (RF) systems, such as automatic gain control amplifiers and full-duplex systems. Variable attenuators based on microelectromechanical systems (MEMS) technology have several advantages over the semiconductor counterparts, including low power consumption and suppressed harmonics. Attenuation can be realized by disruption of signal propagation, which is induced by moving electrodes placed next to a signal line. In this work, the effect of the moving electrodes on the RF characteristics of the variable attenuators is studied via numerical simulation. It is observed that 10 lm of moving electrode displacement can result in 18 dB of attenuation dynamic range at 20 GHz. The similar type of RF MEMS variable attenuators reported previously showed substantial nonlinearity in attenuation-voltage characteristics, which becomes a serious drawback for applications where high-precision attenuation management is required. The main objective of the current study is, therefore, to achieve high dB-linearity, by employing shaped-finger comb-drive actuators in the moving electrode displacement control. In addition, a nonlinear relationship between force and displacement in a clamped-clamped beam spring is taken into account for more accurate device modelling. Through finite element analysis, it is shown that an improvement by a factor of twelve can be obtained in dB-linearity by using a single-comb shaped-finger actuator, compared to standard straight-finger comb-drives. The study also shows that the dB-linearity can be further (2.2 times additionally) improved by utilizing dual-comb shaped finger actuators.Article Citation - WoS: 4Citation - Scopus: 3Hemispherical-Shell Organic Photovoltaic Cells for Absorption Enhancement and Improved Angular Coverage(SPIE - Society of Photo-Optical Instrumentation Engineers, 2024-02-14) Hah, DooyoungA hemispherical shell shape is proposed for an organic photovoltaic cell structure, aiming at enhancing both light absorption and angular coverage. Three-dimensional finite element analysis method is used to study the absorption spectra within the hemispherical-shell-shaped active layer. The study reveals that the proposed structure can result in 66% and 36% of absorption improvements compared to a flat-structured device when the incoming light is transverse electric (TE)- and transverse magnetic (TM)-polarized, respectively. It is also learned that the proposed hemispherical shell structure has absorption improvement as high as 13% (TE) and 21% (TM) when compared to the previously reported semicylindrical shell structure. The angular coverage of the proposed structure is improved as well, reaching 81 deg (TE) and 82 deg (TM), which becomes quite useful for the wearable electronics applications where the incidence angle can vary in a random manner. These improvements can be attributed to better light coupling and guiding through the active layer made possible by the hemispherical shell shape of the device. (c) 2024 Society of Photo-Optical Instrumentation Engineers (SPIE)Article Citation - WoS: 1Citation - Scopus: 1Electret Vibration Energy Harvesters With Symmetrically Configured Curved-Beam Hinges(Springer Heidelberg, 2024-03) Hah, DooyoungFor vibration energy harvesters, broadband power spectral characteristics are often desirable. One way of achieving broadband spectrum is to employ curved-beam hinges, utilizing their nonlinear spring characteristics. In our previous study, electret-based vibration energy harvesters employing curved-beam hinges were investigated via numerical analysis based on stochastic differential equations and colored-noise inputs. It showed that the harvesters with curved-beam hinges can produce higher power than the ones with ordinary straight beams when the external acceleration is between 0.02g and 0.05g. It was also learned that the straight-beam device, a Duffing oscillator, performs better than the curved-beam device, a Duffing-Holmes oscillator, at higher acceleration (>= 0.1g\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\ge 0.1g$$\end{document}). Since the energy harvesting efficiency is one of the most important performance indicators, continuous search for novel configurations with improved efficiency is needed. For that purpose, a symmetric configuration of curved-beam hinges (a Duffing oscillator) is proposed in this work, in contrast to the previously reported one with an asymmetric configuration (a Duffing-Holmes oscillator). This study shows, via numerical analysis, that the symmetric configuration can produce higher (up to 7.3% more) power outputs for the external acceleration magnitude higher than 0.1g, when compared to an asymmetric configuration. The study results also show that it can produce higher power outputs (up to 4.5 times) than the harvesters employing ordinary straight-beam hinges.Article Citation - WoS: 5Citation - Scopus: 5Analysis of Electret-Based Vibration Energy Harvesting Devices With Curved-Beam Hinges(Sage Publications Ltd, 2023-01-26) Hah, DooyoungRecently, vibration energy harvesting devices have gained growing interests. One of the main requirements for them is a broad bandwidth owing to stochastic spectral characteristics of the general vibration sources. Among various approaches for wide bandwidth, curved-beam hinges are quite attractive due to their simple structures. Although there have been several reports on curved beams, a more detailed study is needed. The device under study is an electret-based one with balanced comb-drive configuration. The whole system is modeled by using nonlinear stochastic differential equations. The numerical analysis results show that there is an optimum curve height for maximum power output, which depends on various conditions, such as external vibration strength, comb-drive dimensions, and initial electret charges. At the external acceleration magnitude of 0.02g and 0.05g, the device with curved beams can produce up to 2.9 times and 4.8 times higher power output, respectively, than one with straight beams for given device geometries. To the contrary, at lower and higher vibration magnitudes, straight-beam devices harvest more energy than curved-beam ones. Therefore, it can be concluded that the curved beam height needs to be carefully determined based on the conditions of the application, especially on the characteristics of the external vibration sources.