WoS İndeksli Yayınlar Koleksiyonu
Permanent URI for this collectionhttps://hdl.handle.net/20.500.12573/394
Browse
15 results
Search Results
Article Densification-Induced Chemical Reorganization and Mechanical Enhancement in Amorphous Si2BC3N(Elsevier, 2026-02) Durandurdu, MuratThe atomistic mechanisms that govern the mechanical performance of amorphous silicon-boron carbonitride (SiBCN) ceramics remain insufficiently understood, particularly regarding the role of density. Here, we employ ab initio molecular dynamics simulations to elucidate the structural evolution and mechanical response of low-density (LDA, 2.20 g/cm3) and high-density (HDA, 2.53 g/cm3) amorphous Si2BC3N prepared via melt-quench. The HDA phase exhibits markedly higher atomic packing and network connectivity, accompanied by a nontrivial chemical reorganization. Densification significantly enhances heteronuclear bonding-especially Si-C coordination-while suppressing C-C and Si-Si homopolar bonds. These changes yield substantial mechanical strengthening: the HDA phase exhibits a 48% increase in bulk modulus (130 GPa vs. 88 GPa), along with elevated Young's (266 GPa) and shear (112 GPa) moduli. Our findings reveal a clear density-structure-property relationship in amorphous SiBCN, demonstrating that densification suppresses weak self-bonded motifs and promotes a robust, interconnected atomic network. This insight provides a pathway for designing high-performance amorphous SiBCN ceramics for extreme-environment applications.Article Tuning Properties of Amorphous Boron Via Hydrogenation: An Ab Initio Study(Elsevier, 2026-01) Durandurdu, MuratAb initio simulations are employed to investigate the structural, mechanical, and electronic properties of hydrogenated amorphous boron (a-B:H) across a range of hydrogen concentrations (approximate to 6-21 at.%). The results indicate that pentagonal-like boron clusters constitute the primary structural motifs. The bonding environment consists of both B-H terminal bonds and B-H-B bridging bonds, with the fraction of bridging bonds ranging from 10 % to 16 %. Increasing the hydrogen content leads to a reduction in density and bulk modulus, accompanied by a systematic widening of the electronic band gap. These results demonstrate that hydrogen incorporation profoundly modifies the atomic structure, softens the network, and enhances the semiconducting character of a-B:H, highlighting the tunability of properties in boron-based amorphous materials.Article Citation - WoS: 1Citation - Scopus: 1Quenchable Amorphous Diamond: A Novel High-Pressure Route to Tetrahedral Amorphous Carbon(Wiley-VCH Verlag GmbH, 2025-05-03) Durandurdu, MuratThis study presents a groundbreaking theoretical prediction: the high-pressure transformation of amorphous graphite into a high-fraction sp3-bonded amorphous diamond phase. Employing ab initio molecular dynamics simulations, it is demonstrated that under extreme pressures, amorphous graphite undergoes an irreversible transition to an amorphous diamond phase. Thermodynamic analysis confirms the first-order nature of this sp2-to-sp3 transformation, with the transition predicted to occur at approximate to 33 GPa under experimental conditions. This transformation offers a novel pathway toward the synthesis of amorphous carbon with a high fraction of sp3 bonding, a long-standing challenge in materials science. This work expands understanding of carbon's high-pressure behavior and provides a compelling theoretical foundation for future experimental investigations aimed at synthesizing and characterizing this novel material.Article Pressure-Induced Quenchable Superhard Tetrahedral Amorphous Phase of BC4N(Wiley, 2025-03-13) Durandurdu, MuratThe high-pressure behavior of an amorphous boron carbon nitride (BC4N) composition is investigated using constant-pressure ab initio molecular dynamics simulations. A first-order phase transformation into a tetrahedral amorphous phase with a high fraction of sp3 bonding is observed. This tetrahedral phase is quenchable and exhibits ultra-high incompressibility and a high Vickers hardness (46 GPa), placing it firmly in the category of superhard materials, comparable to tetrahedral amorphous carbon. Tetrahedral amorphous BC4N demonstrates semiconducting behavior with a narrow bandgap of 0.4 eV, making it suitable for applications requiring both mechanical robustness and moderate electronic conductivity. Thermodynamic analyses confirm the likelihood of a first-order sp2-to-sp3 transition, suggesting that such a transformation could occur around 29 GPa under experimental conditions.Article Pressure-Driven Structural Evolution of Amorphous InN(Elsevier, 2025-02) Durandurdu, MuratThrough constant-pressure ab initio simulations, we have uncovered high-pressure phase transformations in amorphous indium nitride for the first time. Our results reveal a distinct two-step progression under compression. Initially, a polyamorphic transition occurs, where the low-density amorphous (LDA) phase transforms into a high-density amorphous (HDA) phase. This HDA structure remains stable in some pressure range and then crystallization initiates, leading to a rocksalt configuration. Upon decompression, the HDA phase reverts to an amorphous network with a slightly higher density and coordination number than the initial LDA state.Article Citation - WoS: 1Citation - Scopus: 1Phase-Separated Amorphous Si2BN: A Computational Study(AIP Publishing, 2025-02-11) Durandurdu, MuratThis study investigates the atomic structure, bonding, and electrical and mechanical properties of amorphous silicon boron nitride (a-Si2BN) using ab initio molecular dynamics simulations. The simulations reveal a distinct phase-separated structure comprising Si-rich and BN-rich domains. BN layers are embedded within the amorphous Si matrix, with only a few bridging atoms linking these regions. The Si-rich region exhibits topological similarities to amorphous silicon, albeit with notable structural distortions. Electronic structure calculations indicate semiconducting behavior with a small bandgap, while mechanical property analysis shows a moderate bulk modulus and Young's modulus, achieving a balance between rigidity and elasticity. These findings position a-Si2BN as a promising material for advanced applications, including flexible electronics, high-temperature semiconductors, and energy storage devices. While the proposed structure is currently hypothetical, its potential experimental realization could open new avenues in material design for emerging technologies.Article Irreversible Changes in Amorphous C3n4 Under Pressure: Loss of Chemical Order and Graphite-Like Character(Taylor & Francis Ltd, 2025-04-03) Durandurdu, MuratThe high-pressure behavior of triazine-based amorphous C3N4, initially exhibiting a chemically ordered, graphite-like structure, was investigated using ab initio molecular dynamics simulations. Our study reveals a pressure-induced transition to a high-density amorphous (HDA) phase characterized by increased coordination number for carbon (3.88) and nitrogen (2.93) atoms. This transition occurs gradually over a broad pressure range, initiated by the breakdown of chemical ordering and the formation of homopolar C-C and N-N bonds, which persist in both the HDA and recovered phases. The recovered phase retains elevated coordination numbers (C: 3.25, N: 2.46) but loses its initial graphite-like topology, evolving into a three-dimensional network structure. Electronic structure analysis reveals semiconducting behavior in the HDA phase and n-type semiconductor characteristics in the recovered phase.Article Citation - WoS: 1Citation - Scopus: 1Atomic Structure and Properties of Amorphous Boron Carbon Nitride (BC2N): An Ab Initio Study(Elsevier Science SA, 2025-03) Durandurdu, MuratThis study investigates the atomic structure and properties of amorphous boron carbon nitride (a- BC2N) using ab initio molecular dynamics simulations. Structural analysis reveals a layer-like topology with varied bonding environments. Unlike the ordered alternating C-C and B-N layers found in the lowest-energy crystalline BC2N structure, a-BC2N features a solid-solution-like arrangement, with B, C, and N atoms randomly distributed within each layer. This randomness gives rise to small, distinct C-rich and BN-rich domains and irregular short zigzag chains of C-C and B-N bonds within each layer. Electronic structure analysis suggests that a-BC2N is likely a semiconductor. Mechanically, a-BC2N displays properties typical of layered materials but with an enhanced bulk modulus.Article Citation - WoS: 5Citation - Scopus: 5Amorphous Silicon Hexaboride at High Pressure(Taylor & Francis Ltd, 2020-03-14) Durandurdu, MuratWe investigate the pressure-induced structural phase transformation of amorphous silicon hexaboride (a-SiB6) using a constant pressure first principles approach. a-SiB6 is found to undergo a gradual phase transformation to a high-density amorphous phase (HDA) in which the average coordination number of both B and Si atoms is about 6. The HDA phase consists of differently coordinated motifs ranging from 4 to 8. B-12 icosahedra are found to persist during compression of a-SiB6 and the structural modifications primarily occur around Si atoms and in the regions linking pentagonal pyramid-like configurations to each other. Upon pressure release, an amorphous structure, similar to the uncompressed one, is recovered, indicating a reversible amorphous-to-amorphous phase change in a-SiB6. When the electronic structure is considered, the HDA phase is perceived to have a wider forbidden band gap than the uncompressed one.Article Citation - WoS: 1Citation - Scopus: 1Amorphous GaN: Polyamorphism and Crystallization at High Pressure(Elsevier, 2024-05) Durandurdu, MuratEmploying constant pressure ab initio simulations, we have shed light on the previously unknown high-pressure behavior of amorphous gallium nitride. Our findings reveal a two-step transformation sequence under pressure. The initial transition involves a polyamorphic transformation from a low-density amorphous (LDA) phase to a high-density amorphous (HDA) phase with an average coordination number of 5.4. Upon pressure release, the HDA state partially reverts to a denser amorphous network with a higher coordination number (4.34) compared to the original LDA phase. Further pressurization triggers the crystallization of the HDA state into a rocksalt structure. Remarkably, the electronic structure of the amorphous forms of GaN exhibits insignificant sensitivity to changes in coordination number, maintaining a band gap of approximately 1.7-2.0 eV across all phases.