WoS İndeksli Yayınlar Koleksiyonu
Permanent URI for this collectionhttps://hdl.handle.net/20.500.12573/394
Browse
2 results
Search Results
Article Citation - WoS: 14Citation - Scopus: 16Dynamic Soil Characterization and Site Response Estimation for Erbaa, Tokat (Turkey)(Springer, 2016-03-11) Akin, Muge K.; Kramer, Steven L.; Topal, TamerSite amplification is one of the most important factors controlling damage in urban areas through strong earthquakes. Local site effects play an important role in earthquake-resistant design and should be considered for site response analyses. In this study, ground response analyses in Erbaa, Turkey, a settlement in the North Anatolian Fault Zone, using one-dimensional equivalent linear analysis and empirical approaches based on shear wave velocity profiles are evaluated and compared. The ground response analyses were performed with consideration of shear wave velocity, and modulus reduction and damping behavior for different confining pressure and plasticity index-dependent models. The results of ground response analyses and amplification values from empirical equations using shear wave velocity are illustrated in terms of amplification and predominant period maps of the seismically active Erbaa settlement area. The comparison has been made in these produced maps of the study area in order to evaluate different site response analyses.Article Citation - WoS: 30Citation - Scopus: 33Assessment of the Effectiveness of a Rockfall Ditch Through 3-D Probabilistic Rockfall Simulations and Automated Image Processing(Elsevier, 2021-03) Akin, Mutluhan; Dincer, Ismail; Ok, Ali Ozgun; Orhan, Ahmet; Akin, Muge K.; Topal, TamerRockfall ditches or catchment areas aim to collect falling blocks at the toe of a source zone by dissipating the energy of blocks in an excavated trench. The effectiveness of a rockfall ditch is simply expressed by its block catchment performance and can be evaluated by empirically using existing design charts as well as rockfall simulations. Although 2-dimensional (2-D) analysis has been executed to assess the catchment ditch effectiveness in engineering practice, 3-dimensional (3-D) rockfall models have not received enough attention so far. In this study, the effectiveness of a considerably long rockfall ditch to protect a settlement from falling rocks was assessed on the basis of 3-D rockfall analyses executed using high-resolution digital surface models. The rockfall ditch efficiency was found to be moderate to limited for various segments considering the percentage of blocks not trapped by the ditch. Moreover, the sensitivity of ditch efficiency to ditch depth was analyzed by automated image processing method as well. Additionally, a particular section of ditch alignment was fictitiously excavated or filled by synthetic Digital Surface Model (DSM) generation through image processing. 3-D rockfall modeling carried out using the DSMs with synthetically manipulated ditches points out that the effectiveness of a catchment ditch is highly depended upon ditch depth. Even a small volume of block accumulation inside the ditch definitely reduces the ditch performance resulting extended runout distances reaching to residential area. Finally, 3-D rockfall modeling is accepted to be an effective tool to rate the efficiency of existing rockfall ditches and synthetically generated ditches on DSMs (or DEMs) by means of automated image processing method may assist the control of current ditch dimension as well as new catchment ditch design.