GCRIS

Now showing 1 - 3 of 3

Citation - WoS: 19
Rockfall Hazard Assessment Around Ankara Citadel (Turkey) Using Rockfall Analyses and Hazard Rating System
(Springer, 2020-03-09) San, Nyein Ei; Topal, Tamer; Akin, Muge K.
Ankara Citadel which is one of the important cultural heritages in Turkey settles in the oldest part of Ankara. Rockfall event has occurred around the Citadel located on a steep hill where andesite is exposed. The rockfall problem causes a great risk to the surrounding area where road, school, floral shops, car parking. Therefore, the major aim of this research is to reveal the rockfall risk around the castle. The rockfall problems around the Ankara Citadel may be linked with weathering, freezing-thawing, earthquake, and cooling joints, and effects or combination of these in the rock units. The rockfall-related hazard at the Citadel is assessed by 2-D rockfall analyses along several profiles in this investigation. Field observations and stability analyses (kinematic and limit equilibrium) of the slopes reveal that there exist many blocks ready to fall down. Four different andesite block sizes measured in the field are separately analyzed on the basis of bounce height, fall-out distance, velocity and kinetic energy of the blocks. The obtained data are evaluated to define the possible rockfall-based hazard zones. Based on the danger zones acquired from the rockfall analyses, the removal of the fallen and loosen andesite blocks and the installation of catch barriers with suggested properties are recommended. Besides, the risk integrated into rockfall hazard rating system on the basis of structural and morphological criteria of the rock mass reveals that medium risk category to be mitigated by light remedial measures for the indicative protection exists in the study area.
Citation - WoS: 14
Citation - Scopus: 16
Dynamic Soil Characterization and Site Response Estimation for Erbaa, Tokat (Turkey)
(Springer, 2016-03-11) Akin, Muge K.; Kramer, Steven L.; Topal, Tamer
Site amplification is one of the most important factors controlling damage in urban areas through strong earthquakes. Local site effects play an important role in earthquake-resistant design and should be considered for site response analyses. In this study, ground response analyses in Erbaa, Turkey, a settlement in the North Anatolian Fault Zone, using one-dimensional equivalent linear analysis and empirical approaches based on shear wave velocity profiles are evaluated and compared. The ground response analyses were performed with consideration of shear wave velocity, and modulus reduction and damping behavior for different confining pressure and plasticity index-dependent models. The results of ground response analyses and amplification values from empirical equations using shear wave velocity are illustrated in terms of amplification and predominant period maps of the seismically active Erbaa settlement area. The comparison has been made in these produced maps of the study area in order to evaluate different site response analyses.
Citation - WoS: 9
Citation - Scopus: 9
A New Quantitative Welding Degree Classification for Ignimbrites
(Springer, 2023-06-28) Akin, Mutluhan; Topal, Tamer; Dincer, Ismail; Akin, Muge K.; Ozvan, Ali; Orhan, Ahmet; Orhan, Ayse
As a pyroclastic rock type, ignimbrites may reveal varying degrees of welding depending on the temperature (> 535 celcius) and overburden pressure conditions during its formation. The welding degree of ignimbrites increases as the formation temperature and the thickness of the overburden deposit in the depositional environment escalate, which are the most crucial factors controlling the rate of welding in ignimbrites. With the increasing temperature, plastic deformation is observed in ignimbrites and the glassy minerals are being welded. Furthermore, the thickness of the overburden causes the deformation of the ash matrix in ignimbrites at the lower sections and the pumice grains are flattened at different rates. An increase in the degree of welding of ignimbrites causes an improvement in the physical and mechanical properties of the rock material as well. Within the scope of this research, petrographical, mineralogical, and geochemical studies were carried out on a total of 16 different ignimbrite types, which have different color and texture properties, obtained from three different regions of Turkey (Kayseri, Nevsehir, Ahlat) where ignimbrites extensively crop out, and the physical and mechanical properties of these samples were revealed. Consequently, a new welding classification was developed for ignimbrites considering the uniaxial compressive strength and dry unit weight. The proposed welding classification consists of six classes ranging from non-welded to highly welded. When the welding degrees of the selected ignimbrites are evaluated, Kayseri ignimbrites mostly exhibit moderate welding characteristics. Nevsehir ignimbrites, on the other hand, have a low welding degree whereas the degree of welding in Ahlat ignimbrites may vary from low to high. Additionally, long and short axis lengths of pumice grains in the ignimbrite specimens were determined by measuring under the microscope, and shape ratios were determined by different shape parameter evaluation methods. As a result, it has been concluded that the pumice grains in Kayseri and Ahlat ignimbrites have a more lenticular structure than the pumice grains in Nevsehir ignimbrites. Eventually, the welding degree classes of ignimbrites and the classification developed by using threshold values of the oblateness ratio (OR) values of pumice grains at different welding degrees are quite compatible. The proposed welding degree classification is of great importance in the selection of ignimbrites widely used as dimension stone and in terms of engineering classification of this rock type as well as it will guide to the scientific studies to be performed on ignimbrites with varying physical and mechanical properties.

WoS İndeksli Yayınlar Koleksiyonu

Browse

Filters

Settings

Sort By

Results per page

Search Results