WoS İndeksli Yayınlar Koleksiyonu
Permanent URI for this collectionhttps://hdl.handle.net/20.500.12573/394
Browse
7 results
Search Results
Article Sustainable Next-Generation Color Converters From P. Harmala Seed Extracts for Solid-State Lighting(Royal Soc Chemistry, 2024) Erdem, Talha; Orenc, Ali; Akcan, Dilber; Duman, Fatih; Soran-Erdem, ZelihaTraditional solid-state lighting heavily relies on color converters, which often have a significant environmental footprint. As an alternative, natural materials such as plant extracts could be employed if their low quantum yields (QYs) in liquid and solid states were higher. With this motivation, here, we investigate the optical properties of aqueous P. harmala extract, develop efficient color-converting solids through a cost-effective and environmentally friendly method, and integrate them with light-emitting diodes (LEDs). To achieve high-efficiency solid hosts for P. harmala-based fluorophores, we optically and structurally compare two crystalline and two cellulose-based platforms. Structural analyses reveal that sucrose crystals, cellulose-based cotton, and paper platforms enable a relatively homogeneous distribution of fluorophores compared to KCl crystals. Optical characterization demonstrates that the extracted solution and the extract-embedded paper possess QYs of 75.6% and 44.7%, respectively, whereas the QYs of the cotton, sucrose, and KCl crystals remain below 10%. We demonstrated that the paper host with the highest efficiency causes a blueshift in the P. harmala fluorescence, whereas the cotton host induces a redshift. We attribute this to the passivation of nonradiative transitions related to the structure of the hosts. Subsequently, as a proof-of-concept demonstration, we integrate the as-prepared efficient solids of P. harmala for the first time with a light-emitting diode (LED) chip to produce a color-converting LED. The resulting blue-emitting LED achieves a luminous efficiency of 21.9 lm W-elect(-1) with CIE color coordinates of (0.139, 0.070). These findings mark a significant step toward the utilization of plant-based fluorescent biomolecules in solid-state lighting, offering promising environmentally friendly organic color conversion solutions for future lighting applications.Article Citation - WoS: 9Citation - Scopus: 11Size, Material Type, and Concentration Estimation for Micro-Particles in Liquid Samples(Elsevier Science SA, 2024-05) Genc, Sinan; Erdem, Talha; Icoz, KutayThe on -site examination and characterization of microparticles are becoming crucial due to the significant rise in plastic pollution in natural resources. Hence, identifying the specific microplastic composition and quantity would enable the implementation of preventive measures. This paper presents a cost-effective setup that utilizes the Random Forest algorithm to detect the size and refractive index of micro particles, hence facilitating the identification of the material type. The system utilizes the scattering patterns of laser light from the dispersion of microparticles, namely within the concentration range of 0.05 fM to 3.00 fM. The refractive indices and particle sizes of melamine (Me8) spheres with a size of 8 mu m, as well as polystyrene (PS8) spheres with a size of 8 mu m and (PS10) 10 mu m, were estimated using the Random Forest algorithm and recorded scattering patterns. The proposed method may deliver findings with an average deviation of 0.23 mu m for particle size and 0.015 for particle refractive index. The statistical analysis indicated that there was no notable disparity between the experimental findings and the predictions derived from the machine learning system. The existing configuration can be readily converted into a point -of -use system that can be employed on -site for the purpose of monitoring and identifying microplastic contamination.Article Citation - WoS: 50Citation - Scopus: 63Optical Detection of Microplastics in Water(Springer Heidelberg, 2021-01-19) Iri, Ahmet H.; Shahrah, Malek H. A.; Ali, Ali M.; Qadri, Sayed A.; Erdem, Talha; Ozdur, Ibrahim T.; Icoz, KutayUnfortunately, the plastic pollution increases at an exponential rate and drastically endangers the marine ecosystem. According to World Health Organization (WHO), microplastics in drinking water have become a concern and may be a risk to human health. One of the major efforts to fight against this problem is developing easy-to-use, low-cost, portable microplastic detection systems. To address this issue, here, we present our prototype device based on an optical system that can help detect the microplastics in water. This system that costs less than $370 is essentially a low-cost Raman spectrometer. It includes a collimated laser (5 mW), a sample holder, a notch filter, a diffraction grating, and a CCD sensor all integrated in a 3D printed case. Our experiments show that our system is capable of detecting microplastics in water having a concentration less than 0.015% w/v. We believe that the designed portable device can find a widespread use all over the world to monitor the microplastic content in an easier and cost-effective manner.Article Citation - WoS: 12Citation - Scopus: 13Numerical Analysis and Experimental Verification of Optical Scattering From Microplastics(Royal Soc, 2023-08) Genc, Sinan; Icoz, Kutay; Erdem, TalhaAccurate and fast characterization of the micron-sized plastic particles in aqueous media requires an in-depth understanding of light interaction with these particles. Due to the complexity of Mie scattering theory, the features of the scattered light have rarely been related to the physical properties of these tiny objects. To address this problem, we reveal the relation of the wavelength-dependent optical scattering patterns with the size and refractive index of the particles by numerically studying the angular scattering features. We subsequently present a low-cost setup to measure the optical scattering of the particles. Theoretical investigation shows that the angular distribution of the scattered light by microplastics carries distinct signatures of the particle size and the refractive index. The results can be used to develop a portable, low-cost setup to detect microplastics in water.Article Citation - WoS: 51Citation - Scopus: 51Multiplexed Patterning of Cesium Lead Halide Perovskite Nanocrystals by Additive Jet Printing for Efficient White Light Generation(Elsevier Science SA, 2020-01) Altintas, Yemliha; Torun, Ilker; Yazici, Ahmet Faruk; Beskazak, Emre; Erdem, Talha; Onses, M. Serdar; Mutlugun, Evren; Serdar Onses, M.Inorganic perovskite nanocrystals (PNCs) offer the ability to precisely but also flexibly control the peak emission wavelength while also possessing narrow-band emission spectra and high quantum yields. Owing to these features, PNCs have been already employed as color converters on LEDs. Nevertheless, the anion exchange reactions that prevent the blending of perovskites of different colors remain as an important bottleneck. As a remedy to this issue, here we employ additive jet printing to form separated stripes of these nanocrystals. Within this framework, we first present the synthesis of CsPbBr3 and CsPbBrxI3-x nanocrystals spanning the whole visible regime and optimize the cleaning procedure to obtain PNCs possessing photoluminescence quantum yields as high as 91% and emission linewidths as narrow as 15 nm, making them suitable for high quality white light generation. Next, we employ electrohydrodynamic jet printing to form closely spaced stripes of PNCs of various colors and integrated these films with a blue LED to create a white LED. Our proof-of-concept LED achieves high photometric performance as it possesses a color rendering index of 91.3, luminous efficacy of optical radiation > 300 lm/W-opt, and correlated color temperature of ca. 7000 K. We believe that additive jet printing technique will pave the way for a ubiquitous use of these PNCs in light-emitting devices in the near future.Article Citation - WoS: 2Citation - Scopus: 3Magnetically Controlled Anisotropic Light Emission of DNA-Functionalized Supraparticles(Springer Heidelberg, 2022-08-23) Erdem, Talha; Zupkauskas, Mykolas; O'Neill, Thomas; Cassiagli, Alessio; Xu, Peicheng; Altintas, Yemliha; Eiser, Erika; O’Neill, ThomasIn this article, we show the DNA-functionalization of supraparticles, form their network, and manipulate the optical features of these networks by applying a magnetic field. We start with preparing the supraparticles (SPs) of semiconducting InP/ZnSeS/ZnS quantum dots (QDs), plasmonic silver nanoparticles, and superparamagnetic iron oxide nanoparticles. These SPs are prepared by employing azide-functionalized amphiphilic diblock or triblock copolymers as well as by using their combinations. Subsequently, we attached single-stranded DNAs to these SPs by employing copper-free click chemistry. Next, we hybridized DNA-coated QD SPs with the iron oxide SPs and formed a network. By applying a magnetic field, we restructured this network such that the iron oxide SPs are aligned. This led to an anisotropic emission from the QD SPs with a polarization ratio of 1.9. This study presents a proof-of-concept scheme to control the optical features of a self-assembled supraparticle system using an external interaction. We believe that our work will further contribute to the utilization of smart self-assembly techniques in optics and photonics.Article Citation - WoS: 2Citation - Scopus: 2Color Enrichment Solids of Spectrally Pure Colloidal Quantum Wells for Wide Color Span in Displays(Wiley-VCH Verlag GmbH, 2022-06-06) Erdem, Talha; Soran-Erdem, Zeliha; Isik, Furkan; Shabani, Farzan; Yazici, Ahmet Faruk; Mutlugun, Evren; Demir, Hilmi VolkanColloidal quantum wells (CQWs) are excellent candidates for lighting and display applications owing to their narrow emission linewidths (<30 nm). However, realizing their efficient and stable light-emitting solids remains a challenge. To address this problem, stable, efficient solids of CQWs incorporated into crystal matrices are shown. Green-emitting CdSe/CdS core/crown and red-emitting CdSe/CdS core/shell CQWs wrapped into these crystal solids are employed as proof-of-concept demonstrations of light-emitting diode (LED) integration targeting a wide color span in display backlighting. The quantum yield of the green- and red-emitting CQW-containing solids of sucrose reach approximate to 20% and approximate to 55%, respectively, while emission linewidths and peak wavelengths remain almost unaltered. Furthermore, sucrose matrix preserves approximate to 70% and approximate to 45% of the initial emission intensity of the green- and red-emitting CQWs after >60 h, respectively, which is approximate to 4x and approximate to 2x better than the drop-casted CQW films and reference (KCl) host. Color-converting LEDs of these green- and red-emitting CQWs in sucrose possess luminous efficiencies 122 and 189 lm W-elect(-1), respectively. With the liquid crystal display filters, this becomes 39 and 86 lm W-elect(-1), respectively, providing with a color gamut 25% broader than the National Television Standards Committee standard. These results prove that CQW solids enable efficient and stable color converters for display and lighting applications.